Electrics in wooden house: entry, wiring, security requirements

Date:

2018-04-27 05:00:47

Views:

577

Rating:

1Like 0Dislike

Share:

Table of contents:

Wooden houses are popular due to the ease of construction, environmental friendliness, and cheapness of construction. The main drawback of this design can be a significant fire hazard. It is therefore very important to pay attention to this process as conducting electricity in a wooden house.

If you strictly follow all recommendations and instructions, work safely and equip electrical wiring.

Where to begin?

wire house

The Main requirement regarding electric supply the private houses, built of wood, is security. Electrical wiring in the wooden house must be performed in strict accordance with existing rules and recommendations. Documents that reglamentary this process are "Rules of arrangement of electrical installations, Standards and other regulations".

Following the above instructions, you'll be able to make the right electrician in a wooden house. This process consists of the stages:

  1. Defines the power of electrical equipment, then there is a drafting supply.
  2. Getting cables, sockets, switches and other electrical devices and electrical appliances are purchased.
  3. Power into the house, connects the circuit breaker, meters the flow of electricity, electric boards.
  4. Is the internal wiring.
  5. Connected sockets, lighting, switches.
  6. Configurable grounding system, connected system of protective switching-off.
  7. Tests for preventive purposes.

Preparing the future of the project

hold the electrics in wooden house

To begin creating an individual project for the electrics in wooden house is required to obtain technical conditions from electricity company. They will be the basis for the work.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

First we need to calculate the free capacity of all electrical appliances. Then create a phased scheme for domestic electricians in a wooden house.

  • Carried out a technical plan for construction. The diagram highlights the areas that will host sockets, lamps, switches and devices that have a separate connection.
  • For each electrotechno need to choose the kind of cable that leads to it. If you put the switches with two buttons or sockets with the grounding, then they need to stretch three-core cables.
  • The diagram also highlights the areas that will host the junction box. Small tip: two adjoining rooms it is better to put one carton.
  • The layout of wiring in a wooden house is marked for each of the power devices. If the device is equipped with an electric motor, then the value you need to specify, given the starting power of this device.
  • Each lighting fixture, chandelier or sconce, is connected in one group, and stronger in power devices as a boiler or a boiler, it is necessary to combine in another group. For them will be the cable and the connection is made through a separate machine.
  • The schema is required to note the distance from the line host cable for doorways, Windows, and distances from floor and ceiling to elektrotokom. Subsequently, this will give you the opportunity to avoid possible disruption of the electrical wiring, if you will carry out repairs.

Council at work: each turn of cable of the internal system wiring is performed exactly at a 90°.

Next you need to make a count of the maximum power that will be consumed by each electric device when they are connected simultaneously. Thus, to determine the rated load on an induction machine.

Selection of the required cable and other components

electrician carry

In order to properly execute the electricians wiring in a wooden house, you can use the tables of electrical reference books. They can pick up the necessary cross-section for cables, to match the electrical devices of all groups. Each device has a technical passport, which displays the consumed amount of energy. Based on these indicators, it is possible to find a suitable cable. If you want to determine the opening cross section of the cable, sum the capacity of each device.

The Most popular cable option to enter the electrics in wooden house is copper wire NYM. He has the necessary insulation, easy to operate and very sturdy. If you have decided to choose the aluminum version, do not forget that they are very vulnerable to bending and often break.

For the socket you need to hold a three-core wire with ground to provide maximum safety when using electrical equipment. Lighting also need to be grounded, however very often, homeowners decide to neglect this rule. However, if you live in a private home and will carry a powerful searchlight to illuminate the surrounding area, to makegrounding is a must.

Switch and socket when installing electrics in wooden house should be selected based on the amperage, type of electrical wiring.

Choose cord opening

As soon As you calculate the load of each of the projected in operating electrical devices, it is necessary to determine the opening cross section of the cable. In that case, if you upgrade the wiring and replaced the old internal cables with guns, a more powerful version, it is important not to forget about the cable on the input. It happens that its cross section may be insufficient for large power ratings, which will be the cause of the fire. In this case, please contact the appropriate company to get replaced. This is done during installation of metering devices and their sealing.

Regarding induction machine, three-phase power must use three-pole circuit breaker. For single phase power, what happens in the majority of cases, used single and double-pole switches that break the neutral and phase.

Helpful hints: introductory circuit breaker should be selected with par, so he did not cut off the power inside the house, when it turns out the maximum load and just breaks the circuit, preventing a possible short circuit.

Value and type of machine single-phase power

The Automatic switch to conduct electricity in a wooden house with their hands need to select on the basis of the data presented:

  • Is Determined by the sum of the power all of the electrical equipment, to calculate the parameter of the maximum current. Most often chosen switch 25 And to a conventional house.
  • If you want to determine the future of the machine, you must also calculate the minimum current for short circuits.
  • The Ratio of short-circuit current relative to the rated current makes it possible to understand the essential characteristics of the switch. It is best to install machines that work well in a network with a mixed load.

Based on the schema electricians in the wooden private house, you can proceed to installing the induction machine. The switches combined into one category of devices of accounting, introductory, the switch must be installed inside the electrical panel on a special metal profile. When you need to carry out wiring according to the diagram.

Proceed to installation

blank wooden building

It is Possible to conduct an open electrician in a wooden house, as soon as you will have all the necessary equipment: sockets, cables, switches, lighting and so on. Based on the scheme drawn up, perform the installation of the switchboard, fixed points for mounting sockets and other devices. If the walls will be sheathed after finishing materials, the cable must be laid inside a metal sleeve.

Installing junction boxes

It must be installed in the location specified on the diagram. Then go to these steps:

  • Set the device to account for inside the body;
  • DIN-rail is attached to the opening machine, and the phase and neutral are fed to a two pole machine;
  • Output terminal devices of the account connected to the input of the input switch;
  • Wire have to have in the house and connect to the input terminals of the counter;
  • On a metal rail set voltage relay, as well as slots for different categories like sockets, lighting;
  • Clamp electrical appliance you need to connect the solid core wire.

Set up the cable inside

create the wiring in the house

Input power cable must be carried out in accordance with the PES and SNiP. You can enter under the ground or in the air. It should be noted that the air method is more cheap, but it is not characterized by its reliability. In this case, you must use self-supporting insulated wire. Also a prerequisite for this method is the installation of fireproof casings, through which it will enter.

Underground wire is underground in a pipe, often made of metal, which helps to protect it from various influences. Such cabling must be agreed with the distribution company.

How to do an internal lining?

If the wiring in the wooden house will be open wiring, in this case, it is possible to identify several methods for its installation:

  • Ceramic roller – it is great for wiring along the walls of logs. This method goes well with the retro style of the room.
  • Metal pipes – they reliably protect the building from potential fire hazard. The pipes are filled with wire is not more than 40%. It is best to use wire made of copper, which is great bend.
  • Plastic channel. It is placed on the wall, and you can choose different colors to suit the walls.
  • Plinth with a special gutter. Inside the plinth are special clamps for fastening of all wires.
  • Fastening by means of staples. Out of the plastic brackets that fit to the cross section of the wires. This method is most often selected in business or technical buildings, as it has not theattractive appearance.

Advice: all the passages of wires between rooms through walls shall be made with fireproof metal sleeves, through which will go cable.

In certain cases, the cable can build a simple wooden floor using metal pipes.

Wall wiring cables

wiring on the ceiling

How to electrician in a wooden house? With the cable channels can be laid so the wires along the walls.

  • You Need to perform the layout of the cable passage relative to the generated schema.
  • Section of the channel depends on how many wires will pass through it.
  • Next remove the cover from the box using the screws attached to the surface. Screws should be placed every half-meter. Space turns you need to reinforce with screws.
  • In certain places, you need to install a junction box.
  • All wires placed inside the channel and close the lid. In places where it will connect to the outlet or switches, you need to leave a small margin for the connection.
  • Combine the wires inside the junction box, after connecting them to the terminals of the machines, sockets.

The order In which you need to connect the wires?

wiring work

Rules provide for the connection of all wires inside the junction box. It must be installed there, which will host branches from the main cable. To connect wires you need the following:

  1. With self-locking terminals. You will need to remove approximately 10 mm of insulation from the wire. Terminals are selected depending on the size of the section of the wire with a layer of insulation.
  2. Using caps for twisting. Thus, the insulation removed from the wires to the length of the exposed cut was not greater than the length of the hood. Located inside the conical spring. Once the cap is placed on the twist coil spring securely fixes the wire and the plastic shell gives the desired isolation.
  3. Twist involves the cleaning of insulation from the wire, about 4 inches, after which they need to tightly twist. They are also preferably soldered to rewind tape.

A Small tip: the number of connections affects the system's resilience to stress. The more there are, the worst will be the load threshold.

Construction of earthing for electricians in the wooden house

No house is almost not complete without appliances such as washing machine, refrigerator, water boiler and so on. Electrical devices with metal housings must be grounded.

How is the grounding:

  • Takes three rods of rebar, length 3 meters, diameter-3 cm. Dug a trench in the form of an equilateral triangle, each side – 1 meter. The depth of this trench is 30 inches. Rebar should be placed at the corners of the formed triangle;
  • Rods are combined with each other. For this purpose, the metal angles that are welded to them.
  • On one of the corners should be welded loop. Screw connection or welding is necessary to attach a steel rod with a diameter of 1 centimeter.
  • Rod is placed in the trench so as to combine it with the ground wire inside the electrical panel. The grounding core have green-yellow insulation.

Next you need to inspect received electrical wooden house, inviting specialists from certified laboratories.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/14734-elektryka-dra-lyanym-dome-uvod-razvodka-patrabavann-byaspek.html

DE: https://tostpost.com/de/gem-tlichkeit/14736-elektriker-in-holzhaus-eingangs---abzweig---sicherheits-anforderungen.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/14743-electricista-en-la-casa-de-madera-entrada-la-apertura-los-requisitos-d.html

KK: https://tostpost.com/kk/domashniy-uyut/14737-elektrik-a-ash-yde-eng-zu-azhyrat-ysh-au-ps-zd-k-talaptary.html

PL: https://tostpost.com/pl/komfort-domu/14731-elektryka-w-drewnianym-domu-enter-instalacje-wymagania-bezpiecze-stwa.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/14725-eletricista-em-uma-casa-de-madeira-entrada-fia-o-os-requisitos-de-segu.html

TR: https://tostpost.com/tr/domashniy-uyut/14740-elektrik-i-ah-ap-bir-evde-giri-kablolama-g-venlik-gereksinimleri.html

UK: https://tostpost.com/uk/domashn-y-zatishok/14735-elektrika-v-derev-yanomu-budinku-vvedennya-rozvedennya-vimogi-bezpeki.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Luke metal plumbing: the size, the features of the application

Luke metal plumbing: the size, the features of the application

Water supply system, protruding outward, do not look very good. To hide them, the owners apply various means. One of them may be a hatch of metal plumbing. Its dimensions are very different. So they can fit in any interior bathroo...

Why is the bedroom with a curtain is the best choice?

Why is the bedroom with a curtain is the best choice?

What is a bedroom in each of our lives. For anybody not a secret that people of any one year of his life holds in his sleep. Healthy, strong and peaceful sleep - the guarantee of health and well-being, the basis for new achievemen...

Corner baths: advantages and disadvantages

Corner baths: advantages and disadvantages

When the dimensions of the bathroom leaves much to be desired, and efficiently accommodate the plumbing is still necessary, then come to the aid of a corner bath, the dimensions of which allow to effectively solve this problem. Th...

The aluminum bulkhead is a great solution for office

The aluminum bulkhead is a great solution for office

Modern aluminum office partitions – is a mobile design, which is made of alloy materials. Their basis is the frame that performs carrier function. Also the profile of aluminum divides the partition into blocks that, in turn,...

Mini tractor for housework with their hands. How to make a mini-tractor for the household

Mini tractor for housework with their hands. How to make a mini-tractor for the household

Mini tractor for household – a very useful technique. With it you can easily move or lift any weights, to collect, for example, hay, or cultivated land. The range of possibilities this technique could be expanded substantial...

The kitchen in tan colors: features and photo

The kitchen in tan colors: features and photo

Repair is always difficult. Come up with so many ideas, original solutions and combinations. But at the same time have to face many difficulties and problems.For example, kitchen – this is one of the most important areas in ...