How to build woodwork with their hands: tips and suggestions

Date:

2019-05-03 09:20:30

Views:

600

Rating:

1Like 0Dislike

Share:

Table of contents:

If a man has Golden hands and loves to build a house on your own, there have to be a carpentry. Woodworking is a fun and creative pastime. Pleasure to work with him, and the smell in the shop, in the woods. Many items of furniture are made of wood. So you will always find the object for manufacturing. How and where to equip the woodwork with their hands?

Studio Space

Before you choose a place, you must know the requirements for a carpentry workshop. As the tools and machines make a lot of noise, then the room should be away from housing, especially grouchy neighbors. In the future the shop should be supplied with electricity at least 220 V. Lighting necessarily on each machine shared. The workbench should fall natural sunlight.

Also, you need to think about how to will be heated area. To work with the tree, the room should be dry and preferably with the same temperature. From moisture the product will be in the room to crack, and the cracks will appear. The cold will grab the glue. The Golden middle. Buying a kiln, think about where it is safe to put in and what will have to drown.

woodwork with their hands

Having a private house, allocate carpentry-joinery much easier. This may be a stone garage, barn, summer kitchen, and just a separately built room. In place to think harder. The apartment is equip a good workshop will not succeed, except that on the balcony to put a small bench and rack with tools. In this case, about any difficult work and not talking. Remains again a stone garage in the garage cooperative. In the metal it will not work because of the heat in summer and cold in winter. In the best case there you can do all sorts of stuff.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

A Tool for woodwork

For a complete woodwork with their hands the necessary machines and hand tools. Many believe that the most convenient option is a versatile machine, but it is not so. When one process, automatically includes the rest. This wears out the equipment, and dangerous when working. Strict, it is possible to crawl under a moving circular saw, etc. Better and more professional to have several individual machines. The organization of the woodwork with their hands need to start to have a circular saw, planer, thicknesser, swotting, lathe.

carpenter's workshop

The Rest of the operation can produce electric hand tools: mill, drill, shlifovannoj a screwdriver. Also use planers, jointer, chisels, clamps, mitre, measuring tool, metal squares, saws and others. For paint and varnish will need a paint gun, brushes. The most important place of any of the joiner - is a convenient workbench, which in its structure has several additional features.

Coverage area

When working with sharp instruments, committing turnovers at a high speed, it is necessary to observe safety rules. First we need to clearly see everything I do. Proper lighting creates comfortable conditions for work of a carpenter. With little natural lighting over the workbench is optional. If a DIY woodwork will be located in the garage with no Windows, the lighting should be combined. To ordinary incandescent lamps add fluorescent.

tables and chairs made of wood

The Light should be smooth and not flickering. Lighting should not create shadows on the product, they can distort visually the proportions of parts. As electrical equipment and lamps in the shop a lot, plan a number of sockets and automatic shutdown in case of overload. It's not always good, especially when the work on the machines. Adjustment of loads on the electrical and lighting falls on the shoulders of the master. The best option to ensure safe operation of the workshop will be a consultation with an electrician. This eliminates problems in the future.

Heating plant

The Ideal premises will be a building with centralized heating. But it is very rare in the workshops. Therefore, each host comes up with their own ways to keep warm. Use fireplaces and oil heaters, caledoni (fireplace fan), air heater, infrared heater. These devices are well heat the hermetically enclosed space, but consume huge amounts of electricity. But it is expensive and unprofitable.

tools for woodwork

In carpentry workshops there is a lot of sawdust, scrap wood, wane and other wastes. All of these need somewhere to take out. The best option is to use such waste for heating. Oven you can cook from a simple metal barrel or to order the welder. Set it aside from the machines for the pipe it is necessary to punch a hole in the wall. To put the oven or the barrel is necessary for sheet metal for fire safety.

Placement Rules

1. Every machine in the shop should be located at a distance from one another, to have free access from all sides.

2. Machines should be kept away from the desktop.In the middle of the shop need to leave a large unoccupied space to build large pieces of furniture, cabinets, tables and chairs made of wood.

3. The floor should be of cement, with a smooth surface of the screed. Machines fixed tight to the floor surface. And be sure of their ground.

4. In the carpentry shop a lot of wood and chips. All this is a highly flammable items. Need somewhere in the corner to equip the box with sand and have a fire extinguisher. Do not stint and buy. For your own safety.

Furniture

Wooden furniture is always appreciated. This eco-friendly material, and the people who care about their health, I try to use natural materials. Manufacturer of all kinds of furniture starts with ideas, planning and measurements. Further drawing of the drawn and selected materials. Sought after oak, larch, Linden, beech, looks very nice walnut. Wood, accessible to all, is pine.

carpentry joinery

The Next step is to prepare the purchased boards for work. They need to align on a planer and nicely processed using a thicknesser. On under size parts are cut on the circular saw. Then there is Assembly and painting. Thus, the drawing can be fabricated cabinets, shelves, bed, tables and chairs made of wood.

Making furniture with his own hands, the carpenter gets pleasure from the realization of their ideas, put their heart and skill into making beautiful products. Wooden furniture for many years, she is strong, so demand from buyers. Having your woodwork, you can afford to update the interior, and earn more.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/32620-yak-uladkavac-stalyarku-sva-m-rukam-parady-rekamendacy.html

DE: https://tostpost.com/de/gem-tlichkeit/32297-wie-holz-zu-bauen-mit-ihren-eigenen-h-nden-tipps-und-tricks.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/32170-como-arreglar-la-stolyarku-con-sus-manos-consejos-y-recomendaciones.html

KK: https://tostpost.com/kk/domashniy-uyut/32958-alay-retteym-z-stolyarku-z-oldarymen-ke-ester-men-synystar.html

PL: https://tostpost.com/pl/komfort-domu/33993-jak-urz-dzi-stolarki-w-asnymi-r-kami-porady-i-wskaz-wki.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/33780-como-equipar-stolyarku-com-suas-pr-prias-m-os-dicas-e-truques.html

TR: https://tostpost.com/tr/domashniy-uyut/29369-nas-l-d-zenlemek-do-rama-elleriyle-ipu-lar-ve-neriler.html

UK: https://tostpost.com/uk/domashn-y-zatishok/33161-yak-oblashtuvati-stolyarku-svo-mi-rukami-poradi-ta-rekomendac.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Bolt lock for security of the premises

Bolt lock for security of the premises

the Castle – the basis of safety of each room. On how he combines incompatible features like reliability and ease of use, depends on the preservation of the values and comfort of use. By way of installing locks are mortise a...

Screens-partitions. Screen-partition to quickly change the space

Screens-partitions. Screen-partition to quickly change the space

the Screen-partitions play an important role in the design of residential interiors. You can use them without investing significant funds to divide the room into zones, while not spending a lot of time on the overhaul.a Little his...

How to drill a tile, so you don't have to buy a new one

How to drill a tile, so you don't have to buy a new one

Every self-respecting man at least once in your life makes repairs in her apartment, by myself or with the help of specialists. One of the most difficult areas the alteration is a bathroom, and not only because it is associated wi...

Install door standard size: how to do it?

Install door standard size: how to do it?

If you decide to install interior doors, I suggest you immediately a lot of patience, as in this case, much depends on fidelity following all the instructions. If you do something wrong, even the standard size door will not fit in...

The cultivation of potatoes by the Dutch technology: soil preparation and planting materials, planting scheme and maintenance

The cultivation of potatoes by the Dutch technology: soil preparation and planting materials, planting scheme and maintenance

No such landowner, who wants to obtain a high yield from their fields and garden beds. No matter what is growing there - tomatoes, cabbage or radishes, as long as it was a lot. The potato is especially true, because it is the basi...

Card loop: features and scope accessories

Card loop: features and scope accessories

People are always in need of a comfortable and cozy arrangement of the dwelling. The development of the furniture industry led to the emergence of a wide range of furniture for various purposes. The trends of interior fashion has ...