Vents for metal: overview, types, features and reviews

Arrangement of the ventilation through the roof, not to be confused with the regular exhaust of air. Of course, the traditional home ventilation may have access through the roof, but in this case it is the system of ventilation of roof space, which, however, can pair with a base and mines. The fact that the ventilation outlets can perform different tasks, one of which is the removal of condensate. And concrete, metal, and wood truss collapse under the action of moisture. Therefore, device integration, providing relatively free access of air from the outside, they are simply necessary.

Features ventilation under metallocherepichnoy roof

The Roof of metal is not the most problematic from the point of view of a venting solution. Device such roofs is that they do not create the effect of a completely sealed vacuum, and in some cases can even do without special ventilation channels. But this is not always, and in most cases in order to ensure the durability of the roof construction craftsmen take decision to create the output. However, in terms of arrangement of such cover is less convenient. As a rule, vents for metal roofing represent multicomponent systems that are integrated gradually to form the air channel. Installation problems can be due to the fact that a roofer needs to invade the structure of the coating and in the case of tiled floorings, this operation requires special skills.

Performance outputs

There are several aspects of evaluating the quality of the ventilation duct passing through the roof. First of all it should be resistant to wind, mechanical and weatherproof design. When buying ventilation outlets are checked for leaks, the density of connections and flexibility in terms of functionality. The latter property is determined, for example, possible to integrate the system into the roof structure from different angles.

Special attention is given to the aesthetic advantages of the product. Because the yield will inevitably stand out against the overall stylistic composition roofing finishes, it is important to consider the textured performance material and its texture. That is, vents are matched in color and material. Of course, the choice in material is due to the rather technical requirements, but if this choice is not fundamental, then preference is metal.

Types of exits

There are two concepts of implementation of roof ventilation, which oriented its products to manufacturers of such systems. This continuous and spot outputs. The first option is the model, which are set entirely by the length of the skate. It is inconspicuous because the design is not issued on the coating surface. If you choose the texture that matches the metal, even on close inspection, functional element will be invisible. And still more common point vents of metal which are fixed in the ridge area with defined margins from each other. However, even in a single element. The advantages of such systems include the function of aeration and forced discharge flows.

Feedback about the models Wirplast

The Polish company Wirplast implements model ventilation outlets in a huge range. Products are distinguished according to various characteristics - from decorative solutions to technical and structural performance. Users note the versatility of this product. The manufacturer offers a modification to provide a direct channel to ventilate the roof space for the antenna of the passage, the organization of the output of the siphon standpipe, etc. Also, many point to the quality of the furniture ensure. Even in the budget version, a vent on the roof of the brand Wirplast is supplied with high quality accessories, allowing you to perform reliable installation and correct function of the channel under certain needs.

Feedback about the models of the Vilpe

The Finnish brand Vilpe is the reference manufacturer of ventilation systems. The owners of such equipment for the roof emphasize its durability, versatility, original design solutions andthe ease of installation. By the way, the developers expect different models to fit the needs of specific roofs, focusing on the slope and coating material. For example, the output of Vilpe vent in a series of Muotokate best suited for metallocherepichnoy decking. According to consumers, material of this collection is durable and protected from environmental influences. Also, thanks to a special coating on the components of output is not covered with small scratches and traces of other minor damage.

Reviews of the models “TECHNONICOL”

It's a domestic manufacturer that covers a wide range of different materials to finish and execution isolation. Immediately it should be noted that these products are inferior in quality and technology development Wirplast and Vilpe Vent. Vents “TECHNONICOL" power users likely recommend a low-cost budget solution for simple tasks. For example, these devices allow you to easily implement a single point exit for the roof of a small house. In addition, owners of ventilating systems of this family are celebrating good design execution.

How to mount a vent on the roof?

The first step is to form a hole in the metal. Typically, the suppliers of this material include special nodal components with rounded elements – it is desirable to apply to the installation exit. Next, the resulting socket is integrated o-ring which further ensures the secure fixing of components. In the last turn set the ventilation outlets with accompanying hardware. The mechanical fixation is realized by means of screws, and in addition will not be superfluous in the connection phase to apply a sealant based on silicone – this will be the waterproofing.

Conclusion

Efficiency and system performance of the vent is largely determined by the quality of its design. Not worth it initially to consider this element of the infrastructure home as a separate functional accessory. Often the ventilation outlets on the roof are mounted as a universal channel that combines several tasks. For example, in one mine can be implemented and kitchen exhaust ventilation, and ventilation in the roof space. Another thing is that such a scheme would require more detailed calculations, and the use of additional fittings to connect different segments of the channel. But in practice such decisions manifest themselves more effective than several individual outputs that require more expenses. And attachments will apply to the purchase of material and technical maintenance of the installed structure.