Plastic Windows: summer and winter mode, adjustment and configuration

Date:

2019-07-03 05:00:26

Views:

1144

Rating:

1Like 0Dislike

Share:

Table of contents:

Now it is easy to adjust the manufactured plastic window. Summer and winter mode, adjustment of which is held in autumn and spring in the advent of extremes, allows you to change the clamping force, which allows to vary the degree of ventilation.

The procedure Itself is the implementation of certain manipulations that may be required after installation of new glazing. This kind of preventive maintenance, allowing to assess the readiness of window designs for a particular season.

Windows summer and winter mode adjust

What to do?

Once you bought a plastic window (summer and winter mode), adjustment, setting them is simple enough. To do this, follow a few simple steps, namely:

  • Open the shutter. On the front side of most structures is a cylindrical convex head, which is called eccentric or axle. Such elements may be several.
  • It has a pair of slots, one of which is longer and the other shorter.
  • In the middle there is a hole for a key.
  • If a short slit is directed on the rubber seal of the window, then the axle is set in the summer position, the reverse position – winter mode.

To Rotate the Cam, it is possible by means of a suitable Allen key or flat screwdriver. Frequent change of position of a Cam just with your fingers, by pulling the adjusting mechanism and it is rotated.

The Difference between the maximum and minimum pressure of the sash is 0.2 cm, which is enough to increase the flow of fresh air.

 Windows summer and winter time adjustment setting

What is the adjustment window?

It is Worth considering that plastic Windows, summer and winter mode which can be adjusted by the force of the sash seal. In the cold season, this process allows you to enhance this figure, and in summer the clamp, make weaker, to enhance ventilation.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Quite often, the Cam slot is parallel to the edge of the window sash. In this position it is if the design comes directly from the manufacturer (universal location that is different from the position of “winter” or “summer” just 1 millimeter).

In winter, the orientation of the axles is aimed at creating additional pressure on the rubber seal. Specialists advise on new Windows this item is not set, doing a neutral position or a summer option. Grommet – is an important element in the design of plastic Windows, for that she is treated with silicone that allows you to extend the service life.

Plastic Windows (summer & winter operation): right alignment

The main advantages of plastic window designs is a high indicator of integrity, it does not create drafts and allows you to keep a healthy microclimate in the apartment or house. After a long operation characteristics of integrity can change due to many reasons. For design, which is already in use, typical damage that reduces the function. This violation often leads to the creation of an unstable atmosphere in the room.

Windows summer and winter mode right alignment

The best adjustment of Windows?

After the plastic window (summer and winter mode), the adjustment should be timely adjusted accordingly, the following effect is achieved:

  1. A stable climate conditions inside the room with a constant temperature control.
  2. Eliminates the ingress of cold air masses in winter due to elimination of through-cracks.
  3. Maintain a constant level of humidity.
  4. Saves financial resources that were spent earlier to pay for the services of heat and electricity.

If done correctly, new Windows (summer and winter mode), adjustment and accuracy of the adjustment which does not require much effort, will last a long time, stable and functional in accordance with the season.

Features

Various mechanisms of plastic Windows can be different in design. This is due to the different number of eccentrics and their configuration. Some products have the cylinders located along the perimeter of the sash, the other samples include a pin with the upper or lower hinge arrangement.

Windows summer and winter mode adjustable and set correctly

In order to properly adjust the plastic window (summer and winter regimes), changes in adjustment should be carried out in the period. To control the position of the axles independently. For this you need to perform the following manipulation:

  • Eccentric on top of it, you can check if to open the door.
  • Next turn the knob and drain the element into a position ventilation.
  • These operations are characterized as opening a window in the rotary direction under the angle.

The result will be visible we need a mechanism in the lockingscissor window details.

Conclusion

Plastic window (summer and winter mode), adjustment of which consists of moving the eccentric to the required position adjusted by a simple turn of the hex wrench counterclockwise.

Windows summer and winter change modes adjust

After a perfect action of the axle moves to the required position and set to the desired level. As soon as all the details will fall into place, prepare the Windows for the winter period can be considered completed.

In addition, you can check the status of the hardware. All the weak and the faulty mounts should be replaced, repaired or mounted.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/34889-plastykavyya-vokny-letn-z-movy-rezhym-regulyavanne-nalada.html

DE: https://tostpost.com/de/gem-tlichkeit/34559-kunststoff-fenster-sommer-und-winter-modus-einstellen-und-konfiguriere.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/34404-las-ventanas-de-plstico-el-verano-y-el-invierno-el-modo-el-ajuste-y-la.html

KK: https://tostpost.com/kk/domashniy-uyut/35181-plastikaly-terezeler-zhaz-y-zh-ne-ys-y-rezhim-retteu-zh-ne-baptau.html

PL: https://tostpost.com/pl/komfort-domu/36248-okna-plastikowe-letni-i-zimowy-tryb-regulacja-ustawienia.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/36043-janelas-de-pl-stico-de-ver-o-e-de-inverno-modo-o-ajuste-e-configura-o.html

TR: https://tostpost.com/tr/domashniy-uyut/31602-plastik-pencere-yaz-ve-k-modu-ayarlama-ve-yap-land-rma.html

UK: https://tostpost.com/uk/domashn-y-zatishok/35402-plastikov-v-kna-l-tn-y-ta-zimoviy-rezhim-regulyuvannya-nalagodzhennya.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

How to make hole in glass: methods and instruction

How to make hole in glass: methods and instruction

Create holes in the glass may appear a simple operation, but in practice it is rather complicated and responsible procedure. The structure of the glass pliable for machining, but it is very fragile. Therefore, the feature of the o...

How to get rid of moles folk remedies?

How to get rid of moles folk remedies?

According to a survey every year to get rid of moths becomes more difficult. If before getting rid of this harmful insect does not require much time and effort, now this is a real problem. Sounds strange, but over time, these pest...

How to make the effect of Biffeld-brown with his own hands?

How to make the effect of Biffeld-brown with his own hands?

it would Seem that all the phenomena of the world is well explained by modern scientists. But this is not so. There are many unknown and inexplicable from the scientific point of view of events. Examples of such experiments and ph...

How to grow celeriac from seed?

How to grow celeriac from seed?

Celery is famous for its unique useful properties. It is a good helper in the treatment of diseases such as anemia, disorders of the nervous system, diseases of the cardiovascular system and gastrointestinal tract, kidney and live...

Campanula garden of the family of bells

Campanula garden of the family of bells

Campanula photo which immediately suggests that the plant belongs to the family Campanulaceae, has a lot of varieties.garden Blooms Campanula blue, white and purple bells profusely and continuously, starting from late spring until...

The use of thuja Brabant in garden design

The use of thuja Brabant in garden design

Thuja Brabant is in great demand among gardeners. This is not surprising because it is an undemanding plant remains attractive year round. Furthermore, culture is growing rapidly, it is easy to create a hedge in the short term. Ho...