Trellis for climbing plants with your hands. Supports for climbing roses and grapes

To climbing cultures grew normally vertically, you need support. Trellis for climbing plants with your own hands is simple. It can be installed anywhere. Trellis can be removed when the holiday season came to an end.

Varieties

Trellis for cucumbers, raspberries, roses or grape species. A person should read them and decide what is right for him. The supports are:

1. Single-plane. This is a different grille, partitions, fences.
2. Two-Plane. It can be balconies, arches.

The First type is best for small areas of young shrubs. The bushes that grow strongly, fit the second option. Using the two-plane trellis can save space, provide a great harvest.

Material production

Most Often used for tree stand trellis. It is made from slats or material planed type. Not only wood is used, there are trellis, metal, plastic, wrought iron, bamboo. Sometimes for construction use ordinary wire.

The Material must be resistant to corrosion to endure different weather conditions. Because the design is not hidden, it is under the open sky. Of course, if it is not placed in the greenhouse.

Form of wooden structures

For the planned design, it is important to choose the correct form. Wooden garden trellis is better to make square or rectangular. The form must be cellular. The design will be stronger if the cells are smaller. It is recommended to combine cells of different sizes: first big, then small.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

To trellis for climbing plants with your own hands was performed with maximum quality, add metal brackets, angles. They are placed at the junction of the rails.

Two-Plane frame must be greater than 2.5 cm in thickness. This allows the design to serve as a support for plants of any kind. Such trellises for roses can be done without attaching to walls.

Form structures of other materials

Trellis for climbing plants, with their hands made of plastic, wire and metal, can be of various shapes. Make it curved, flat, horizontal, S-shaped, sliding, tent. Such designs replace many decorated items that are designed for suburban areas. Using trellises make vineyards dreams. You should pay attention to plant varieties, as sometimes need the use of special shapes.

Requirements to the posts

A Trellis for climbing plants with your own hands creates a robust, sustainable, one that could withstand a strong wind. Allocate these requirements to the built support:

• You want to arrange a Foundation or dig deep to support construction;
• Climbing plants to climb upward on a rough surface, otherwise they will not be able to stay.

Support with your hands

Rose, who weaves a very harmonious look on metal structures, made in the form of a column. To build such support difficult. This is done as follows.

1. Pour the Foundation concrete.
2. Install 4 pin made of metal.
3. It is required to weld the transverse rings, which are made of thick wire.
4. Eventually this prop will make roses. It can be and other plants. Sometimes support decorate, do it, for example, in the form of the Eiffel tower, the crossbar in this fishnet.
5. Made design is well fixed on the surface.

Sometimes a trellis for raspberries, grapes, cucumbers and other weaving plant becomes more complex way. This requires the following:

• Timber-tree of size 0. 3x3 cm;
• Drill
• Hacksaw;
• Chisel;
• Bars round shape;
• Screws;
• Antiseptic mixture;
• Plugs (diameter is 9 cm);
• Screwdriver;
• Brushes, paint;
• The glue that bonds the wood.

Tapestry in the country, is mostly done in the form of a rectangle, so construction required the Board, which is formed by the frame. Usually taken two-meter beams. The frame is constructed, attached longitudinal rails. The distance between them is determined depending on the plant design will be maintained. Between the erected beams attached transverse wooden bars.

You want the bars were well pressed to the rails. Because of this, making small incisions with a chisel. To bond wood elements, use a waterproof glue. Sometimes use screws, it allows to strengthen the structure. While trellis for cucumbers, grapes, raspberries or other plants are prepared, as the glue needs to dry, select a wall, where it will be attached. Then mark the mounting location, drill holes for the dowels.

The design Itself need to be impregnated with antiseptic liquids, this will create protection from insects and excessive moisture. A trellis for raspberries, grapes, cucumbers and other plants can be painted. Color is chosen at its own discretion. There is also another option: varnish.

After the work done trellis mounted on the wall. It is used as a support for any plants that curl.

Structure for the grapes

In the case where the grapes are planted near the house, and away from him, for example, in the garden, you should try a different approach to the construction of the structure. If the trellis is supposed to place small plants to facilitate their growth make low support. But the grapes gradually grows, after which small structures unable to withstand it. This makes more durable trellis, for example using wire.

For this construct two piers, their deep, 60 cm, dig. Between them stretched wire. Make a support with a thickness of about 15 cm, and in height they should rise by 2.3 m, and even more. Between the posts is a different length, it is about 2.5 m. Attach additional support, the thickness of which depends on the plant stems. By the way, that grapes grew better, trellis directed to the South.

To build the prop with your hands, it is better to use a strong wood such as oak or ash. In addition, frequently used are mulberry, acacia, chestnut as these trees hard enough. But birch, alder and poplar is not advisable to use. The support of these trees is unreliable. For designs not suitable and wet or young wood, as the material must be dry.

It is Recommended to use a tree that is peeled from the top layer, is treated with antiseptic compounds. It is wrapped by special waterproof material. Ideal wire with zinc coating, as it is long and looks aesthetically pleasing. The bottom row is fixed at the height of half a meter above the ground, and the following series string at the same distance from each other. This design is usually 3-4 rows of wire.

Used for support and the metal, concrete columns. Metal structures do not differ in size from wooden poles. To make holes for mounting the wire, it is required to drill holes. In this case, you cannot use brackets, as was done with the wood. But these tapestries should not be used if the grapes grew. Here you will need to build a two-plane design, but they are badly made.

Interesting solutions

For plants that are low growing, for example, for cucumber, you can use simple support. For this purpose sufficiently near each plant to drive the pegs into the ground, and up from them to pull the rope. Cucumber will be able to reach up such structures. Also in such situations often use the support of plastic. But remember that they are not able to withstand the heavy plants.

Important to know

To the support for the grapes you want to approach carefully, because with the right structure, it will bring huge benefits. You should consider some rules so that design last a long time. Important:

1. To Accommodate supports for the grape needs from North to South. Doing so to the bushes illuminated by the sun from both sides equally.
2. Periodically, you need to process parts of a vehicle that fights corrosion. Wooden elements are treated with drugs that destroy the fungus.
3. Trellis can be deformed or fall. To avoid this, make strengthen using transverse axes and rails.

Support can last for a long time, to only benefit the plants. For this you need to spend on their construction more time to include fantasy, to implement all measures of protection material used. In this case, the vineyard will be pleasing to his master, to bear fruit to evolve for a long time. You have to consider many factors in the manufacture of supports for other climbing plants.