How to make a chaise longue with your hands: step by step instructions

This piece of furniture is mainly used in country houses, townhouses, cottages. With it being comfortable spending time in the circle of friends, acquaintances, family. In this article we will discuss the process of making the chaise with his own hands.

Reasons for its production

Original piece of furniture, created on their own, can give a unique look when decorating. A rocking chair would be appropriate to fit into any interior, like under the eaves or in the shade of the trees and the sun. Created a chaise longue with your hands can be used for dolls and other toys kids and also for babies when placing the chairs under the awning.

Advantages

This product is characterized by many positive qualities that made wooden beach chair, made, has become quite popular.

List the main of them are:

• Special design, providing a convenient location, backs, armrests and seats, which provides maximum comfort to the person; the latter is achieved in any position — as in polusidya and a half;
• It can be used for sunbathing and for children and their toys when placed under a canopy;
• Easy handling and high portability and convenience;
• Can be used as benches for rest;
• The bulk of manufactured wooden products of this type is collapsible; when folded it occupies little space;
• Crafted chaise lounge should be of high quality, durable and strong.

Using the appropriate drawings, even an inexperienced user can, in conjunction with the instructions to create this piece of furniture.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Classification of sun loungers

It is characteristic features that are inherent in them:

1. Monolithic — represent a single object in which all parts are firmly connected to each other. It is able to withstand high loads, because it is very durable. But you can not change the backrest angle, they will not be folding, so they are difficult to move and store.
2. Monolithic with spetsstavki — equipped with additional decorative pieces. This reduces the reliability and durability of these products, however increases the aesthetic indicators.
3. Portable — they contain special mechanisms to change the position of these seats or their configuration. In particular, it is possible to change the angle of the footrests, backrests or headrests themselves. They are foldable, easy to transport and convenient for storage. These hand made deck chairs for the garden are best suited.
4. Chairs with metal bases harder to make yourself. They basically get ready. There is a steel or aluminum frame, which are mounted on a sturdy fabric. They are characterized by low weight, relatively high mobility and compactness. They are also the most resistant to various contaminants that occur in the operation.

Tools and materials for creating handwritten loungers

The manufacturing Process is simplified by many craftsmen, and today some models do not even need drawings. But, as in any other business, need some knowledge and the application of labour with the intention that the resulting product was beautiful, durable and reliable.

The Basic list of materials, tools and components to create the chaise with his own hands:

• Saw blades;
• Wood putty;
• Measuring tape;
• Sandpaper;
• Screws;
• Square;
• The token.
• Paint;
• Drill;
• Board size 400 x 2.5 × 8 cm-4 PCs;
• Sticks of wood 400 x 5 x 10 cm — 3 pieces;
• Studs for fixing — 2 pieces.

Dimensions

The dimensions of the chaise with his own hands can match the size of the body of the wizard that makes certain owners that will go to the creation after creation. You can use standard size-60 x 190 cm

Build a skeleton

To answer the question: “How to make a chaise longue with your hands?”, consider the entire manufacturing process stage by stage.

First, you create a solid frame. To do this, create 4 details of timber: 2 of them have a longitudinal length of 2.15 m, 2.; cross with a length of 0.5 m.

After that start the hack seats. They are made of boards, cut into bars with a length of 60 cm are Harvested 13 similar bars.

The Generated frame is fixed with screws between it and the obtained line segments, the distance should be 1.

Creating the legs and backrest

Next create the legs. It is better to create a support double with a length of 35 cm is made of wooden bars.

In the next step make back. For its production need two parts for 88 cm and three for 39.

Then fix the boardsthe backrest on the frame along the length of the lounger. That the design was aesthetic appearance, round out the top plates.

Back to change its position, attach to the base. To do this drill at a distance of 9 cm from the edge of the seat holes. The grooves should be made end-to-end to ensure free passage between the two structures.

Hairpins record created by the chaise on both sides. Based on the design made by two of a groove, into which insert support bars for fixing of the backrest in various positions. Single groove 5 x 10 cm make at a distance of 9 cm from the location of the studs. The second — 5 x 5 cm — 20 cm from the first. The first notch is placed horizontally 60 cm wooden beams, which will allow you to fix the backrest in a semi-sitting position. To the angle of inclination can vary and can be taken polulezhachee position, first pull the beam and mount the Board in the second groove in a vertical position.

Then the whole structure is trimmed to zero sandpaper and covered with paint or varnish. The manufacture of wooden deck chairs with their hands completed.

More tips

To prolong the life of the lounger you need to conduct the processing of protective liquids wood surfaces, preventing it from premature spoilage from the action of direct sunlight, insects, rain and other force majeure. You can use frosting or a high quality varnish designed for wood, oil or wood vinegar.

To create additional protection sunbed equipped with awning. This is especially true in areas with frequent rain and hot climate. To do this, take the 4 bolts with washers and wing nuts. The bolts cut off the heads, the end, where no thread is sharpened so that its appearance resembled sloping tetrahedral wedge. To the top of the awning and the rails of the back attached a fabric awning with the bolts.

To soften the backrest and seat, they can put a rolled up towel. It is best to fold in multiple layers and to stitch in a few places. You can encase small mattress.

Photos of chairs made of wood with their hands placed in the article.

Manufacturer of tubular chaise lounge

Above, we considered how to make the wooden design of this furniture product. But it can be somewhat cheaper if you use plastic pipes.

Chairs made of tubes with their hands can be made entirely of plastic — they are intended for adults and also small in their number and seat made of thick fabric — is designed for children.

To make you will need:

• 2-inch PVC pipes;
• G - and T-shaped connectors — 8 and 6 units, respectively.

Combine 2 vertical strap, having a length of 30 and 45 cm connector in the shape of the letter “T”. On the ends of the dress l-shaped such. They do the same with the second vertical. One horizontal bar should be solid, with a length of 66 cm. It is attached to a T-shaped connection is directed into the structure.

On the other side, attach two 30 cm pipes that line up with the T-adaptor that is rotated by a half right angle from the long side.

In the end, the design must be strictly rectangular.

To create a connection, which will be the rotation of the seat, you need the T-connector, insert 5-inch pipe and secure it with another in the same connector.

The Long sides are created in a similar way. Used pipe length of 30 and 45 cm, the connector is l-shaped. The crossmember is a solid 30 cm tube and 2 to 20 cm with the T-connector.

The result will be inserted one in another rectangle.

The Seat is inserted between the short side horizontal and the vertical length of the quadrangle. Customizable level of tilt. Measure the distance between the free T-connectors. Cut pipe the desired length. Between these connectors, set the segment as the backup.

Measuring how much fabric you will need for this lounger. Stocking up on thick fabric such as canvas, jeans. Filed the edges and fasten it on design.

Photos of the chaise lounge, his hands created, given in the article.

Creating fabric chaise lounge

You will need:

• Bolts and nuts 8 cm;
• Round stick — 1 PCs diameter 65 cm, 2-60 and 2 — 50 cm;
• Nails with rounded heads;
• Sandpaper;
• Bars with a thickness of 25 cm x 60 cm;
• Glue
• Needle files;
• Durable fabric 200 x 50 cm

From the tree, you can take the raw materials of beech, birch or oak.

From tissues it is possible to take denim, sailcloth, tarpaulin, tick for mattresses, camouflage.

At the base of the chaise three frames:

A. 1200 x 600 mm.

B. 1100 x 550 mm.

Vladimir 650 x 620 mm.

Prepared and polished boards. Retreating in the longitudinal bars 40 and 70 cm, drill a hole matching the diameter of the bolts. Grinding hold needle files.

In the part B making the cut, stepping back 7-10 cm They will allow you to change the position of the back. Cut 3-4 holes that grind.

The scheme should make the holes intended to connect to.

Join frames A and b, then A and B bolts. You can round the ends of the rails to lubricate PVA that will give them greater reliability.

Apply the fabric in the folded position to the sun lounger. It should be slightly tight. Measured and filed the fabric, and then attach to the sun lounger. Round rails or turn it, or put on hinges that are pre-made on it on the edge of the fabric base. In the first case, the fabric is nailed with nails of small size.

In conclusion

To Create a chaise longue with your hands is not as difficult as it might seem at first glance. There are plenty of build options. This article describes three different options: one of pure wood, one — of plastic pipes and one — made of wood and fabric. Following the advice given in it, it can be quite aesthetic and reliable sun loungers for the garden or a country house with their own hands. The choice depends on the tastes and preferences of the wizard who created this piece of furniture.