Epoxy or polyurethane floors: what to choose

For an average consumer relatively recently become available such construction and polymer blends that allow you to quickly and efficiently create a layer on the surface of the subfloor. These sweep consist of two basic fillers: polyurethane polymer or epoxy resin.

Before starting repairs, many builders often ask the question: should I choose epoxy or polyurethane floors? Which material is better? To answer these questions definitely not. It all depends on the conditions you will operate the cover.

Depending on the used filler has received the following names: polyurethane and epoxy floors. It should be noted that the layer created with the help of these fillers, is the finish and applied to a prepared subfloor. Preparation is the preliminary alignment and primer base sand-cement screed.

Below will be considered epoxy or polyurethane floor.

Epoxy floor compared to polyurethane, has a smooth surface. To determine what coverage is the best fit to the specific operating conditions, it is necessary to deal with what is common in these polymer flooring:

- epoxy and polyurethane floor belong to the class of liquid surfaces;

- the distinctive feature of such floors is the lack of seams. Due to this, the surface is easy to clean, it does not accumulate dirt;

- polymer materials dry quickly and harden. However, during installation, toxic: it is necessary to protect respiratory organs and provide fresh air. After drying, these floors are absolutely safe for humans and can be install in children's rooms;

materials resistant to wear. Can be used in areas with high traffic.

- have a high tenacity with Paul, but when removing can be difficult.

Here such features have epoxy and polyurethane floors.

What is polymer floor to choose

The Question of which polymer to choose gender is relevant when carrying out repairs. It all depends on what premises these floors will be used: heated or not, with a high temperature or not, in the house, have shrinkage or not.

Epoxy floor more solid and therefore more durable. He is not afraid temperature changes, so it can be used in unheated rooms and in baths, pools and saunas. Due to its hardness – sensitive to sagging of the floor. That is, if the house shrinks, then the floor can develop cracks. Also, cracks may appear, and bumps on its surface in any subject. However, cracks can easily be hidden with a transparent epoxy lacquer.

Epoxy floor suitable for any room, especially bathrooms, swimming pools, baths and saunas. But if you want to under his feet was something softer and less slippery, you can consider the option of polyurethane floors.

Polyurethane floor characteristics similar to linoleum: it has a plasticity. Durable enough: it is used in the shops, and covered Parking. It is suitable for residential use. Good resistance to mechanical impacts. However, the material does not tolerate freezing temperatures: starts to crack. So this floor should be used only in heated premises. To ultra-high temperatures the material is also not suitable – begins to curl, so it is not recommended to install in saunas. Polyurethane floors good for kitchens, corridors and rooms.

Decoration polymer flooring

As epoxy and polyurethane floors were originally used in workshops or warehouses, they didn't set strict requirements to their attractive appearance. But the situation changed when these floors moved into apartments and houses. Then there was a necessity to carry out the decoration of polymer flooring.

By and large, polymer floors can be decorated in three ways:

1. Add dye in mixed solution at the time of pouring the floor. Factory color polymer flooring is not to everyone's taste, since it resembles the back room of the store. To diversify scarce original color scheme mixtures allow different color, which in the necessary amount are added to the polymer mixture.

2. Use decorative grains. As these grains are used: floki, chips, sequins. These items are purchased separately. Grains are created from plastic or acrylic, they can be coated with bright paint, including reflective. The shape of the grains may be different from a rectangle to a snowflake.

3. To put the image. On the hardened first polymer layer of the floor is applied to the image. The image can be applied using brushes and paints and sticking vinyl film already printed with her picture. Further applied to the second transparent polymer layer. It should be noted that this method of decoration suitable for epoxy flooring.

Thus, the choice of epoxy or polyurethane floor should be based on the ability of materials to withstand specific operating conditions. More information about the repair of apartments, visit the website: Http://www.remountroom.ru.