How to level concrete floors: a few tips

When you move into a new apartment or simply refurbishing an existing one, it would be desirable that the floor was also fine. But to lay a parquet, linoleum or laminate, must be strictly horizontal basis. And then the question arises: how to level concrete floors? It is quite possible to do yourself, allowing you to save money and you will not need any special skills. You will be quite ever seen before, as they performed such work.

If we talk about how leveling concrete floors, it is worth noting that begins any work with your markup. You should find the highest point of the floor. This is done using a hydraulic level, good cord, cups or chocks of different heights. Two people at first pull a cord on a diagonal from corner to corner, and the third only touches the level of this cord by inserting it horizontally. All the mounds on the floor should be below this cord. When you reached the goal, in the centre of the floor is exposed to the beacon, gets chock the desired height, and in the corners of the room are placed the marks on the walls in places where the cord is. The second diagonal it is necessary to build exactly the same.

Talking about how leveling concrete floors, it should be noted that the highest mounds are usually found in corners of the room, and where there are seams. If the difference in height is large enough, you should evaluate might be better to cut down a high hill than to carry out the pouring of cement almost the entire room.

Understanding how to level concrete floor, it is necessary to hold the marks from the string line marking. This line may be raised to the same height depending on the roughness, and reduce it is impossible, because the Central tracker have already been exposed at the highest point. Now you should move the cord lines on the walls to make the floor additional beacons. The distance between them must be 70 centimeters. Should be several times to verify the correctness of the invoice to exclude the formation of new bumps. To do this, the cord should stretch from wall to wall in all directions. Marks on the walls should be level with the height of the beacons.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

To Understand further how to level concrete floors. The next step is to start pouring. Before this gender need to cover with soil. For ties you can use regular mortar, but it is recommended to apply special mixture. The density of the solution should be adjusted depending on how thick is the cement screed. The principle here is very simple – the thicker the tie, the thicker should be the solution. Installation of concrete floors should be carried out as carefully as possible, evenly filling the space with mortar. The screed shall be as exposed lights. The surface should be levelled with a wooden rail very carefully. When the coupler a little clutch, beacons you want to remove, and in their place to fill the solution. The surface should be well hardened, so no need for her to go ahead of time.

Now you know how to level concrete floors.