Hot melt adhesive: key features

Date:

2018-03-21 06:47:09

Views:

435

Rating:

1Like 0Dislike

Share:

Table of contents:

None of the furniture production is not able to do without special adhesives, in order to ensure quality clutch parts in the Assembly. For this purpose, a hot melt adhesive, which is a solid pellets, acquires a viscous condition when heated and quickly hardens when cooled.

Structure

Properties of this material is provided with special components in the composition. Often adhesives are made on the basis of vinyl acetate and ethylene copolymer.

This combination gives the product:

  • Adhesive strength
  • Good viscosity;
  • Cohesive strength;
  • Perfect compatibility with other materials.

hot melt adhesive

To further improve the product properties, the hot melt adhesive may contain more and razlichnye:

  • Napolniteli;
  • Modificatory;
  • Plastyfikatory;
  • Antioxidant.

All this makes the final material better wettability of the surface, increased elasticity, less shrinkage, low thermal degradation, and more.

Features

To hot melt adhesive for edge fit perfectly, should consider the materials for the cladding panel details. If production are often used only edges of a certain type, you need to use only hot melt adhesive recommended for such products. In the case of application of different types of edges with the same frequency glue should select a versatile player that is equally suitable for any material.

the edge of PVC and hot melt adhesive from

Consumers are also filled and unfilled adhesives. The latter is cheaper and often attract attention, but their density is much higher, and hence fuel consumption when the application will be great. In the end, the cheapness is not justified. There are times when such adhesives are required, as they are well fill the deep layers of chipboard.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

The application

Also, when choosing you should pay attention to the characteristics of the adhesive. Material supplied in the form of rods, does not require complete melting to work. It is applied to the parts, melting gradually from one edge, thereby improving the quality of gluing. The edge of PVC and hot melt adhesive EVA can connect on a different scheme, often used for complex designs. This option provides the glue in a liquid state on the edge, after which it is delivered to the consumer. Next to the veneer glue should be re-melted by hot air and combine with other items. Speed quite low, but the adhesive consumption low, thereby eliminated all kinds of defects of the porous structure parts bonding.

Features

When operating to avoid possible accumulation of moisture between the parts and glue, so all edges and furniture items can be put into work only directly with a warm warehouse. In the case of their cold moisture condenseries chilled edges and degrades coupling parts with glue.

Operating temperature

To the hot melt adhesive was able to provide the perfect bond, you need to work with him only at certain temperatures. Usually the systems are able to provide the desired performance, but under certain conditions the temperature may be reduced.

hot melt adhesive for edge

For example, if:

  • The presence of a burnt layer of glue in the reservoir;
  • The low speed of the feed of glue to the application
  • Work with cool details.

The nuances of the application

To ensure optimal grip, a layer of adhesive applied should be of the desired thickness. If too much glue it will be squeezed at the edges when you clamp, but will provide a better grip. A small amount of composition will not lead to contamination of working surfaces, but will not be able to provide the proper degree of bonding. After applying the material immediately sent to the pressing, which is done with steel press with smooth rollers.

Advanced materials

Today is the best hot melt adhesive for PVC PU materials. This composition has collected all the advantages of both conventional and reaction products. Polyurethane adhesive is able to harden not only in the physical temperature, but chemical. Special soultati in the structure of the glue to form cross-links under the influence of humidity, thereby transforming the composition into a three-dimensional structure of the clutch.

Complete the solidification of this product lasts several days, but it all depends on external factors:

  • Humidity of the parts and the environment;
  • Temperature parts and the environment;
  • Chemical composition of the adhesive.

hot melt adhesive for PVCStorage of adhesives of any composition should be strictly in dry closed rooms at certain temperatures, because under the influence of adverse conditions the material loses its properties. When moisture on the glue it becomes unusable. After the glue has completely switched to solid form, his strength is observed in the temperature range from -30 to +150 degrees.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/22076-kley-raspla-asno-nyya-haraktarystyk.html

DE: https://tostpost.com/de/gem-tlichkeit/22084-hei-schmelzklebstoff-die-wichtigsten-eigenschaften.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/22100-adhesivo-de-fusi-n-en-caliente-principales-caracter-sticas.html

KK: https://tostpost.com/kk/domashniy-uyut/22069-zhel-m-eru-neg-zg-sipattamalary.html

PL: https://tostpost.com/pl/komfort-domu/22020-klej-stopi-podstawowe-cechy.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/22026-adesivo-hot-melt-principais-caracter-sticas.html

TR: https://tostpost.com/tr/domashniy-uyut/22079-s-cak-eriyik-yap-t-r-c-temel-zellikler.html

UK: https://tostpost.com/uk/domashn-y-zatishok/22051-kley-rozplav-osnovn-harakteristiki.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Figs: growing in the home. Figs from seeds. Growing in the open ground, care

Figs: growing in the home. Figs from seeds. Growing in the open ground, care

Figs, he's a Fig tree, he Fig tree – this is a southern plant that prefers to grow where it's warm. However, the Russian gardeners are not afraid of difficulties, and they started to try to put him not only on the windowsill...

List of construction companies of St. Petersburg. Rating of construction companies and developers

List of construction companies of St. Petersburg. Rating of construction companies and developers

In this small article we will try to compile a list of construction companies in St. Petersburg, who do their work conscientiously. Also we will talk about how to choose a construction company, what to pay attention to and what to...

Replacement of the strut of water supply and sewage systems in apartment

Replacement of the strut of water supply and sewage systems in apartment

Even if you reside in a comfortable apartment, sooner or later you will face a question of replacing the risers. If you are faced with this problem, it is best to change the piping for hot and cold water simultaneously. Even when ...

Shingles

Shingles "Ruflex" is the newest roofing material

matter how reliable the material will be selected for the roof, directly depends on the degree of protection of internal premises of the building. Equally important is also the appearance of the roof. Ugly roof, even with an aesth...

The monolithic construction of multi-storey buildings: technology, requirements

The monolithic construction of multi-storey buildings: technology, requirements

Over the past few decades, monolithic construction of multi-storey buildings has become a real breakthrough for the whole construction sector. The design of such facilities contain the minimum number of supporting elements in the ...

How does the mounting clamp and where is it used?

How does the mounting clamp and where is it used?

Almost all industrial enterprises of Russia applies such auxiliary device as clamp mounting. This tool is a small device in the form of a screw with a bracket. Its main function and value is to fix parts for a certain time in spec...