The shed in the yard of a private house made of metal profile

Date:

2018-03-22 06:20:14

Views:

499

Rating:

1Like 0Dislike

Share:

Table of contents:

At the stage of planning the territory on the site of a private house it is not always necessary to build permanent structures with walls and a Foundation, as it makes construction work more costly, and the craftsmen have to spend more effort. Sometimes it is not acceptable from an economic point of view, and in some cases the owners do not feel the need for a confined space. That is why you can build a shed in the yard of a private house.

Material

shed in the yard of a private house

Use the recommended profile, which is presented for sale with a solid rolled, shaped beams, rental of different cross sections, as well as non-profiled sheets. It is from these rolling elements are made sheds, gazebos and canopies.

In the shed – it's rigid structure, which is composed of a frame and support legs. If you want to build a simple system, it should make a lean-to shed, the slope of which is limited only by the dimensions of the roof. Shed awnings are most often arranged based on the main building. If appropriately designed product, then we can eliminate the basic system of water drainage from the roof. This is because the design itself will play the role of a drain, and the walls will not get wet. Walls can be made of any available material, but better show themselves metal profile of the core rental. He is strong enough to bend, has a low weight and easy installation. The shed in the yard of a private house will be a great solution, if the owners is necessary to build a type a shed or garage. The materials for the work are inexpensive, available worldwide and compatible with the technology of self-construction.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Training tools

shed in the yard of a private house photo

When built a shed in the yard of a private house, photos of which are presented in the article is necessary to prepare tools, among them:

  • Building level;
  • Measuring tape;
  • Hacksaw;
  • Screwdriver;
  • Welding machine;
  • Galvanized screws;
  • Mounting parts;
  • Bolts;
  • Wrench set;
  • Drill.

Site Preparation

shed in the yard of a private house photo of corrugated

If you decide to build your own shed, then you need to determine the location of the future building. It is desirable to select a smooth area, inside which there are engineering communications. If during excavation works damage the power cable or the water supply system, construction of shed will go on for some time on the backburner. The shed in the yard of a private house should be erected on the pre-aligned area, the size of which is suitable for future building. The most attractive looks iron pipes that have sufficient strength. The elements will act as a frame, the diameter can start from 50 mm. as to the thickness of the walls, you should choose the products in which the parameter starts from 3.5 mm. You can purchase tubes that were in use, the integrity for them is not critical. In addition, if the canopy in the yard of a private house made of leaky pipes, the design will be more cheap. It is important to determine the weight of the roof, including the roof. Thus, for the open canopy, which is 6x3 m, will have 8 vertical supports that will be used 80-mm pipe. They dig in a row on the four sides.

Reference

shed in the yard of a private home from profile

For each pair of tubes on the basis of weld farm of the corners. It is important the presence of transverse stiffeners. If you decide to build a shed in the yard of a private house, photos, the distance between farms should be explored. For example, if you place two 80-mm pipe at a distance of 3 m from each other, they will be able to withstand weight up to 250 kg. This will be enough for the massive roof, including considering snow load.

Creating a frame

shed in the yard of a private house photo with their hands

The Shed in the yard of a private house photo of corrugated Board involves the installation of vertical supports, which is the most important stage in the work. A quality canopy will succeed only if support will be strictly vertical. It is important to note that the upper edge should be at the same level. If you decide to use a three-meter supports, you will need to apply pipe the length of which varies from 3.4 to 3.5 m Hole dug to 60 cm in depth, and the width should be doubled to fill a sufficient amount of concrete mortar. Before mounting the tubes at their upper end should be welded perforated or continuous flange of a steel plate or circle. Flanges will be convenient to weld to the farm for the roof. At the bottom of the prepared hole is filled with gravel and sand, the thickness of each layer should be equal to 6 see, it is Important to set pipe support strictly according to the plumb line, this step should be performed two or three, otherwise it will be difficult to control the verticality of the elements. The pipes are fixed in the holes with large stones for securityto strengthen opposite a support welding, forming between them a reinforcing rod.

If you decide to create a shed in the yard of a private house made of metal profile, the next step is to fill the hollow space between the pipes and walls a concrete solution, which is prepared from the cement of grade M-300 or above. To ingredients you must add gravel and sand, and after pouring the solution design is left for a few days until the concrete hardens. During this time, the vertical supports will gain the necessary strength.

Setting the farm

shed in the yard of a private house of wood photo

If you decide to build a shed in the yard of a private house photo of corrugated Board, the next step is to install the roof. For each pair of vertically mounted tubes welded farm, you will need to use rebar and angles. This element should have the form of an isosceles triangle, and its sides made of angles. The bars or rods must be applied to the transverse stiffeners and the long side. In areas where farms would be based on the pipe, it is necessary to provide flat platforms from the area. Farm welded still on the ground, this will allow you to achieve identical size. After completion of these works should use scaffolding or steady the ladder by which the master pick up farm to install them on the ends of the columns. First prihvatyvayut welding, and after the installation of the picture can be adjusted completely.

Roof Construction

shed in the yard of a private house photo distance between farms

When built a shed in the yard of a private house, photos of this design it is recommended to consider in advance, this will allow you to understand what technology to implement the construction of the roof. Between the triangular trusses with the inner side of the roof needs to be strengthened by welding, using 4 reinforcing rod, which will be distributed throughout the length of the canopy. In the next step the wizard starts installing the sheathing, and then secures the corrugated sheet on the roof. If the building will have walls, they raise up from the ground and brought up to the roof. Placed walls between the supports, but it is much faster to run them from a corrugated sheet, which will be mounted on a solid crate. It is important to remember that the metal sheets in contrast to the concrete walls and brick walls require high-quality insulation.

The Manufacture of wooden canopy: preparatory works

If you decide to deliver a cross in the yard of a private house, photos of your hands you will be able to do after completion of construction. You should consider them in the article. Perhaps it will allow you to understand what a design it is best to use. For example, to create a wooden shed you need to choose a place, giving preference to the area in front of the gate, along the garden or the garden and the garage. This approach will allow you to use the awning not only for car but also for storing equipment and garden tools.

Construction frame

Wooden sheds, and metal, provide a vertical rack. For this purpose the beam after mounting in which are mounted the opposite longitudinal beam. The angle of inclination of these elements, which will be laid in the grooves of the upper ends of the supports should not be more than 3%. The shed in the yard of a private house of wood, a photo of which is presented in the article should have a truss system. On the supports are placed the rafters, and their fastening on the longitudinal beams. The distance between them should be equal to 70 cm Have to pull back from the edge, about 9 cm to set extreme rafters to the beam. Connection of wooden elements is produced by cutting the shelves on the ends.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/16866-naves-u-dvary-pryvatnaga-doma-z-metalaprof-lya.html

DE: https://tostpost.com/de/gem-tlichkeit/16871-carport-im-hof-des-privaten-hauses-aus-metalloprofilya.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/16884-cobertizo-en-el-patio-de-una-casa-privada-de-metalloprofilya.html

KK: https://tostpost.com/kk/domashniy-uyut/16866-al-a-zheke-yd-aulasynda-b-r-metalloprofilya.html

PL: https://tostpost.com/pl/komfort-domu/16845-wiata-na-podw-rku-prywatnego-domu-z-metalloprofilya.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/16844-galp-o-no-quintal-de-uma-casa-privada-a-partir-de-metalloprofilya.html

TR: https://tostpost.com/tr/domashniy-uyut/16872-g-lgelik-avlusunda-bir-zel-ev-metal-levhalar.html

UK: https://tostpost.com/uk/domashn-y-zatishok/16857-nav-s-u-dvor-privatnogo-budinku-z-metaloprof-lyu.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Led lighting for the garage (ceiling)

Led lighting for the garage (ceiling)

Every garage, no matter how intensively it is used needs quality, reliable and safe lighting. Today's market offers a large number of various types of lamps with its own characteristics and scope, but garage spaces are special req...

Plastic Windows the Labrador: reviews. Windows the Labrador: prices

Plastic Windows the Labrador: reviews. Windows the Labrador: prices

Plastic window is not the first year occupy leading positions in the segment. They are popular among all segments of the population, are in great demand with an extensive lineup. Today it is the most effective solution in the fiel...

Furniture - quality, originality and uniqueness

Furniture - quality, originality and uniqueness

just look around in your home, and you will probably find broken furniture or decide that it's time to change something. It is not necessary to run to the shops in search of modern sofa – from old furniture, you can create o...

Apple

Apple "candy": sweet varieties

Apple “candy” was bred in laboratories VNIIS im. Michurin by crossing varieties “korobovka” and “papirovka”. Variety is a medium-high neat tree, wherein silnoroslye. The crown of this tree is th...

The transit bolts in a washing machine: what is and how to remove them

The transit bolts in a washing machine: what is and how to remove them

the normal operation of the washing machine depends not only on parts, Assembly and installation, but also on the correct transportation. The most vulnerable part during transportation – drum. It is attached to a powerful sp...

How to choose doors for bathroom and toilet: photo examples

How to choose doors for bathroom and toilet: photo examples

In each dwelling have a bathtub or toilet. The door on both the inside and outside must be suitable for the design of the room. Another important factor that affects the life of the product, is the material of manufacture. There i...