Press for hay with their hands: a description of the device, scheme and recommendations

Date:

2020-04-13 20:00:15

Views:

372

Rating:

1Like 0Dislike

Share:

Table of contents:

The Question of winter storage of hay urgent for farmers and individuals involved in the breeding of livestock and poultry. There are some simple ways to package hay that do not require large expenditures. One of them – press.

Hay Press

The old dried grass clippings are collected in bundles. They not only occupy a lot of space, but often deteriorate. Does not save the hay and plastic case. If the sheaf is not wet on top, it begins to rot from the inside out.

Much more convenient and practical, as modern farmers to store the hay in a compressed form. The mechanism for the formation of the briquette can be made independently, without the high costs. Often a considerable part of the material is in storerooms and barns.Press for hay

Options that were applauded by many users, three. Two of them are metal or wooden casing with a hinged piston. Third – press trambovki powered thrust tillers.

The easiest to manufacture (no need to weld) and use a wooden press for hay. His work is held in four stages. Hay laid in the box, throwing the press three times, press. Then, without removing, tie with twine.

Design features

The Mechanism is a large box made of wood, which sits rigidly on a frame of thick timber or metal profiles. The box has no roof, but has the folding door, like the gate.

Hay Press their hands hard to do. Need planed, sanded and carefully polished boards. It is desirable to connect metal parts with mounting bolts. Then you need to unjam the box around the perimeter (top and bottom) rails of metal (preferably stainless steel). This will give the design strength.Press for hay with their hands

The gate

Processing rejkami the box, you need to remember about the opening for the door-wicket. So experts recommend to duplicate the strengthening from the inside. Along the upper perimeter will be enough, as at the bottom the bottom is fixed with an iron frame.

The easiest option fixing hinged gate – the usual hinged or door hinges. And tight to hold it during the pressing needs of the side metal rods. They need to be secured so that they stood out side and ended in big notches. The length of the protrusion depends on steel or wooden gate, or rather from the thickness of its side faces. The valve can be made of a bar, rod or rigid rods.

Main part

The press Made hay out of metal or wood. To the rear of the box is attached to the beam several times larger than the height of the boxes. On it are fixed two parallel beams. Distance is calculated so that between them were able to mount the beam, which will make half-turns around its axis. At the second end of the beam is attached to the sole press. She should be allowed to make the same half-turns.baler for hay

The Shape and area of the sole is calculated by the cross-sectional dimensions of the structure itself. The ease of movement of the piston leaving 5-8 mm.

On the back of the boxes, in convenient place, mounted winch with synthetic twine or thick fishing line. On the other hand, on the door-the gate bore two narrow, elongated openings. They are needed for bundles of the resulting briquette.

Baler for hay

This device greatly facilitates the work of the farmer. Baler machines laborious and lengthy process of collecting dry grass from the fields. Smart unit not only collects, and rolls the hay into tight bales.

To Purchase a baler is easy. But is a factory option for conventional tractor or mini version. For small farms, using only the tillers, he does not like.

You can Assemble a similar device you can own. Much cost and effort is not required.

This press for hay with his own hands made fast enough, a great deal with a full cycle for the Assembly and packaging of hay. They are able to gather the dried ridges on the field, compress and wring dry grass in a roll.

Several Advantages. Such balers are simple devices, and as a result, have a comfortable setting. Don't crumble the grass and not deform the bales of hay for makeshift press. The sizes of collected aggregates allow you to create small briquettes, move that and put one person.

Minor fly in the ointment can be considered only a lower density of briquettes emerging from improvisedpress. Most often it occurs from-for absence of the device for cords, which is not installed, so as not to lose the power of the tractor.self-made press for hay

Design stopdrawing machine

For Assembly you will need:

  • Skeleton for installation of all components and the main part of the attachment to the device thrust – lubovina;
  • Navigation element with a rigid base for the press box. Equipped with two wheels to move across the field;
  • Up with the conveyor belt, which will collect the rollers from the field of hay;
  • Camera-casing of cylindrical form with pressure on the propeller transmission and small transmission. This part is made of roller, grating, pressing hay, forming the steel plate on a rigid spring (factory set instead – hydraulics).

It is worth noting that the more powerful the motor-block, the greater the likelihood to achieve the desired speed of rotation of the rollers, the higher the collected unit performance.self-made presses for hay, the size

Build

Homemade press for hay, working from the thrust tillers, mounted in several stages:

  1. Going suspension – base on two pneumococus.
  2. Mounted On it lubovina himself up with the conveyor belt.
  3. Press for hay and box mounted as a single independent element. In the bottom of the box are attached rollers and grille for holding hay. In the spring, at the top of the box, fixed plate. She presses already pressed grass before twisting into a roll.
  4. Next is going to drive. You need to connect the propeller shaft and two-speed gearbox, which to walzem with a conveyer belt of the pick-up is the chain transmission.
  5. On the device pick-up mounted gear of a diameter slightly larger than the rolls (to speed up selection and power compression).

If the quality of the bales are not satisfied, you can divide the work. First collect dry grass motolotnie a rake, then compress.


Article in other languages:

HI: https://tostpost.com/hi/business/24349-press-for-hay-with-their-hands-a-description-of-the-device-scheme-and-.html

PL: https://tostpost.com/pl/biznes/41576-prasa-do-siana-w-asnymi-r-kami-opis-urz-dzenia-schemat-i-wskaz-wki.html

PT: https://tostpost.com/pt/neg-cios/41344-prensa-de-feno-com-as-m-os-a-descri-o-a-unidade-o-esquema-e-recomenda-.html

ZH: https://tostpost.com/zh/business/49093-press-for-hay-with-their-hands-a-description-of-the-device-scheme-and-.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Line Manager: definition, managerial activities, tasks and functions

Line Manager: definition, managerial activities, tasks and functions

each organization has personnel management. They include three categories of people: artists, professionals and managers. The latter, in turn, are divided into:Functional, which are responsible for specific units, perform specific...

Mass production - what is it? Feature

Mass production - what is it? Feature

the production Process is organized in accordance with different criteria and approaches. In order to optimize their production cycles, increase financial results, companies are being very thoughtful to methods of manufacturing th...

Pharmaceuticals - what is it?

Pharmaceuticals - what is it?

the Pharmaceutical industry – an industry whose task is mass production of standardized drugs. It is a historical continuation of pharmacy. Between the two concepts, and methods of obtaining medication is a significant diffe...

How to change the card number on the

How to change the card number on the "Aliexpress" change rooms on the website and in the personal Cabinet "of Alipay"

Buying in these online stores like "Aliexpress" and "EBay" has long ceased to be a novelty for users of the world wide web. From Chinese manufacturers easier to find a product, the ratio of quality and price which will be a pleasa...

Catalytic reforming is an advanced technology with a century of history

Catalytic reforming is an advanced technology with a century of history

the Beneficial properties of the oil known to mankind since time immemorial. It is used to obtain fuel and raw materials for the production of synthetic fibers and plastics. While mankind has always sought to maximize profit from ...

Premix for laying hens: vitamin composition and instruction

Premix for laying hens: vitamin composition and instruction

the Successful breeding of laying hens on the mini-farm will be only in case of proper feeding. The diet of this bird should be as balanced as possible. To get from laying as many eggs as possible, they usually give the grain and ...