Farm - what is it? Construction

Date:

2020-04-16 06:00:15

Views:

545

Rating:

1Like 0Dislike

Share:

Table of contents:

The Most common meaning of the word "farm" – the agricultural enterprise is designed for livestock. But now it's not about the place of part-time farming. Here you can find all the information about probably the most ancient building structures, which are still relevant in modern life. It has wide application in construction, especially in the construction of bridges and sporting facilities.

up

Farm – a system composed of rods, which remains geometrically unchanged when you change its rigid hinge nodes. It also includes truss beams, which are represented by combination of two - or three-span continuous beams and supporting thrust.

Where?

As mentioned, farm in construction is an indispensable element. With its help builders simplify the structure and reduce the consumption of necessary materials. Without the use of the farm does not manage the construction of bridges, stadiums, hangars, and ornamental structures such as pavilions, stages, podiums, etc.

When designing the hull of a ship, aircraft, locomotive, the strength calculation is done in the same way as the calculation of the load on the farm.

Classification

Farm – it is a structure consisting of rods which are interconnected at nodes to form statically unchanged system. The classification of farms can be carried out on many properties.

Russian farm

Payloads design

  • Light. They use a single cross-section. Light truss are often used in the construction industry.
  • Heavy. Heavy farm are used in the construction of tower cranes, sports stadiums, etc. they use rods more complex cross-section than in the lungs. As a rule, they consist of two-three parts due to the large effective lengths and hold them loads. Often use dougstanhope cross-section with two-plane nodal pair.

Common signs

  • By appointment. the purpose of the farm are the tower, bridge, crane, farm coverage, support structures, etc.
  • By material type. Wood, steel, aluminum, concrete, etc. – all of this can be made of the construction of the farm. This is a significant advantage of this system. You can also combine several kinds of material.
  • By design. There are many types of sections, types of grills, types of support structures, and the types of belts the construction structure of the farm.

Spatially

  • Flat. Farm take vertical load, because x terminals arranged in the same plane.
  • Spatial. Distribute the load throughout its area. Spatial farm formed from many flat farms, which are interconnected in special ways.

farm

Recommended

Staff evaluation: system and methods

Staff evaluation: system and methods

Personnel Assessment allows you to identify how competent the employees involved in the enterprise, and it is the performance of their work – the most significant factor affecting the efficiency of the company. To clarify the impact of performa...

How to start your own business: important aspects.

How to start your own business: important aspects.

Many people, tired of working for someone else, are increasingly thinking about how to start your own business. Someone wants to open a salon, someone store, and someone enough and vegetable stalls. Before you throw in the pool with his head, it is i...

business activities. its essence and basic functions

Business activities. its essence and basic functions

The Entrepreneurial activity of the citizen – is undertaken at your own risk and independent activity, which aims to systematically profit through the sale of works, goods, services, use of the property. The citizen engaged in such activities, ...

By type

  • Beam Mirandela.
  • Farm Warren.
  • Farm Pratt.
  • Farm Bollman.
  • Farm Finca.
  • Triangular truss.
  • Kingpost.
  • Farm with cross-struts.
  • Urban Lattice design.
  • Farm under the overhead light.

Design Features

Classification of a farm design features is quite extensive. Next, each of the features will be considered in more detail.

Types section

The Cross sectional construction of the farm is made of rolled profiles. It can be in the form:

  • Corner (single or double).
  • Pipe (round or square).
  • Angle bars.
  • Brand or I-beam.

big farm

Belt Types

The shape of the belt can be represented as:

  • Trapezoid. Its advantage lies in the fact that this kind of belt tightening frame node, respectively, together with it increases the stiffness of the building.
  • Triangle. This type of belt is used for beam and cantilever systems. He has a lot of disadvantages, such as wasteful consumption of the metal in the load distribution, the complexity of the reference node, etc.
  • Parabola. This zone is the most time consuming. Therefore, the segment of the farm are very rare.
  • Polygon. Polygon farm are used more often than the segment. Because they fracture at the nodes of the structure is not so noticeable.
  • Parallel belts. Often used to cover industrial buildings. They have a similar scheme of nodes equal to the size of the grating elements, and they also have repeatable elements and components.

Types grid

There are six model variants of the grid:

  • Treugolnaya.
  • Rembiesa.
  • Sprengeliana.
  • Krestova.
  • Raskosy.
  • Poltorashka.

Types support

There are 5 types of support structures. To choose the reference node, we need to know the calculation sheet. It depends on whether the support unit is pivotally or hard. Types of support:

  • Beam or consolida.
  • Arachna.
  • Mantova.
  • Ramna.
  • Kombinirovannij.

farm construction

Principle of operation

The Uniqueness of this design lies in its "immutability" under the influence of external factors. The load on this system is large enough. Farmrepresents the multitude United in one design of triangles. Burden is concentrated at the connection nodes, because the rods better display its properties in the process of compression-tension, and not fracture. In modern construction often use a stiff, and not the swivel rods. From this it follows that the separation of one of them from integral design they remain unchanged relative to each other position.

The Principle of calculation of trusses cutting corners

This method truss calculation is the easiest. This method is taught in many technical schools.

Farm – this design, load is concentrated in its nodes. Therefore, it is necessary to calculate all the external factors, which will be the load on the nodes. Then calculate the reaction of the support and to find the node which contains 2 of the rod with applied on them by force. Conventionally, it is necessary to separate the whole of the rest of the farm and to node, which will be a few known values, and 2 unknown. Then you need to be equality on two axes and calculate the unknown values. In the same way we distinguish the following node, and so as long as the farm will be calculated.

Basic types of trusses

  • Beam of Mirandela – a system where all the parts form a rectangular hole and thereby connected to the rigid frame. It is by design, does not fit the strict the term “farms”, because that column is missing a pair of forces. It was developed by Belgian engineer Arthur Virender. But since this design is massive enough, it is rare to find in modern architecture.

up design

  • Farm Warren. This is a simplified version of design Pratt-Hova. It works on the principle of compression-stretching. Most often made from steel.
  • Farm Pratt. the Patent for this structure belongs to the father and son from Boston. Caleb Pratt and Thomas Wilson were the two engineers. They used short pieces vertically, and stretched horizontally. So the load is distributed equally well both above and below.
  • Farm Bollman has complex and inconvenient design. Its popularity in the US, this structure was due to the political virtues of its Creator. The inventor spoke eloquently about the farm, even if not all true. Bollman managed to promote his invention with the U.S. government, which sometimes forced the planners to use this design when designing bridges. Among patent holders, trusses, there are many of our compatriots, but still, no "Russian" farm did not progress to the masses so in an original way.
  • Farm Finca is a simplified version of farm Bollman. He just shortened all of its elements and thus made it more effective. It also has similarities with the design of the Pratt farm. It differs from it only absence of the lower beam.
  • Triangular truss. Also it is called the "Belgian". It is a modern design, which is presented in the form of triangles with sprengeliana.
  • Kingpost - the easiest way to farm. It is a pair of supports, based on the vertical beam.
  • Lattice city structure was created to replace a large wooden bridges. It is quite simple in its design. It is used for the usual wooden boards that are attached to each other at an angle, which, in turn, form a lattice.


Article in other languages:

AR: https://tostpost.com/ar/business/21909-farm---what-is-it-construction.html

BE: https://tostpost.com/be/b-znes/39414-ferma---geta-shto-takoe-buda-n-chaya-kanstrukcyya.html

DE: https://tostpost.com/de/business/38926-bauernhof---was-ist-das-hochbau.html

ES: https://tostpost.com/es/centro-de/38705-la-granja-es-lo-que-es-construcci-n.html

HI: https://tostpost.com/hi/business/23505-farm---what-is-it-construction.html

JA: https://tostpost.com/ja/business/21503-farm---what-is-it-construction.html

KK: https://tostpost.com/kk/biznes/39799-ferma---degen-m-z-ne-rylys-konstrukciyasy.html

PL: https://tostpost.com/pl/biznes/41539-farma---co-to-jest-konstrukcja-maszyny.html

PT: https://tostpost.com/pt/neg-cios/41185-a-fazenda---que-isso-o-projeto-de-constru-o-civil.html

TR: https://tostpost.com/tr/business/36346-iftlik---bu-nedir-n-aat.html

UK: https://tostpost.com/uk/b-znes/40255-ferma---ce-scho-take-bud-vel-na-konstrukc-ya.html

ZH: https://tostpost.com/zh/business/34405-farm---what-is-it-construction.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

The pedestrian traffic lights: types and pictures

The pedestrian traffic lights: types and pictures

the Idea of installing traffic lights at street intersections to control traffic belongs to Londoner John Peak knight. By profession he was a specialist in railway semaphores.a Few historical factsthe First traffic lights were des...

Industrial beekeeping - what's required? Products for beekeeping. Courses of beekeeping

Industrial beekeeping - what's required? Products for beekeeping. Courses of beekeeping

the Establishment in 1814 by the Russian beekeeper P. I. Prokopovich hive has made possible the practical application of rational methods of beekeeping. Followed in the first half of the 19th century the invention of the artificia...

Structure and purpose current transformer

Structure and purpose current transformer

the Transformers in the infrastructure systems of energy provision can have different meanings. Classic designs are used to transform individual power parameters to values suitable for carrying out measurements. There are other va...

Unlike ZAO JSC: various organizational-legal forms

Unlike ZAO JSC: various organizational-legal forms

In life, many are faced with various terms, for example involving the law or the economy. This is a common trend, because we are surrounded by thousands of shops, businesses, cafes, shopping centers and other places that can be ca...

Operational information: receipt, management, storage

Operational information: receipt, management, storage

What is operational information? Where is it used? What are the features of its application exist? These and other similar questions will be discussed in the article.In Generalthat information can be transmitted over a distance, i...

Rigging fixtures, tools and mechanisms

Rigging fixtures, tools and mechanisms

Any industrial production in varying degrees associated with the installation dimensional and complex goods. In many cases, the person to independently perform such work cannot. For this purpose, the rigging tools, mechanisms and ...