Why do I need to paint calipers and how to make it?

Painting the caliper is a set of paint works to improve the appearance of the part and its further protection from corrosion. Usually the material for these works used special paint resistant to aggressive environments and large temperature changes. In today's article we will talk about how is painting the calipers at home and why it is needed.

Choose color

First we need to decide what shade to paint the detail. The most effective is painting the calipers red. It makes the car more sporty and accentuates its individuality. As well look orange and silver. It should be noted that this material must be heat resistant, since the discs are regularly heated to the critical temperature. Painting calipers with powder paint is one of the most effective for today.

Start work

After purchasing all the materials to begin work. The first step is to drive the car in a garage or other room where there is a large concentration of road dust. It is worth noting that when painting the caliper is not necessary to remove the brake discs and pads. First, remove the wheel and prepare surfaces for the application of the material. Be sure to get rid of loose rust. This can be done using coarse sandpaper. If necessary, you can use a steel brush. Then it is necessary to degrease the surface and clean it of dirt. Spots of brake fluid from the caliper is being removed (of course, if they are there). In order to avoid the material in places such as brake hoses, to seal the surface with tape. Only after the surface was washed and cleaned, and the extra items covered, you can begin to paint.

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

It is Worth noting that now the wide circulation was received special kits for such work. They contain not only paint hardener, and a special spray. This ensures that the material is resistant to corrosion and temperature extremes. First, the components are mixed in a ratio of 1/3 and put the paint in a separate container. The spray is applied immediately and wait 5 minutes until it will disappear. The paint is applied very carefully and evenly across the surface. After the first layer dried, apply the top one. Be sure to wait until the material dries (about 15-20 minutes). Further, nothing can cause is not necessary. All, at this stage, the painting of the caliper is completed. It now remains only to collect the wheels back on and remove the masking tape from the brake hoses.

Paint the calipers - photo of result

The end result is a beautiful, eye-catching stand, which in the next few years will be protected from rust and various oxidations. Such detail will not only be attractive but also durable, because the surface will be exposed to external factors to a lesser degree.