Why glued vinyl film for car? How to glue film on the car. What brand of vinyl to buy film

To date, the styling of vehicles is carried out in various ways. However, the most popular – pasting auto vinyl wrap. This material is available from many manufacturers. The range is so great that to choose a suitable vinyl is not so simple. If desired, you can simulate almost any surface of the body, but also without problems change the main color of the machine as a whole. To stick vinyl tape on the car can not only in a dedicated cabin, but in his own garage. Main – to comply with all the rules. This method is more convenient and affordable than painting. If necessary, the body can be completely covered with film, and can be applied to the original drawing.

What is a film

Vinyl on the car to simulate not only glossy, but matte, and a carbon coating. The main advantage of this material lies in the fact that if necessary it can easily be removed without damaging the vehicle surface.

There are following kinds of films:

1. Protective. They are designed to protect the surfaces of the vehicle.
2. Textured. Such vinyl film for car has a certain kind of texture that allows you to simulate, for example, a carbon coating.
3. Gloss.
4. Matte.

The name of the film it becomes clear that each species has its own characteristics and performs certain functions. In addition, the vehicle body can be material that is promotional in nature. In this case vinyl can differ a low quality and be less durable.

Recommended

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

The Main advantages of the material

Vinyl on the car, the prices of which depend on the characteristics and properties of the material, has many advantages:

1. Performs a protective function. Vinyl film protects the paintwork of the vehicle from scratches, chips and other minor damages.
2. Updates the look of the car.
3. Vinyl is resistant to natural and other external factors. The film is not subject to corrosion. Does not lose its properties due to moisture or sunlight.
4. Glue film auto you can own.
5. If necessary, vinyl can be easily removed without damaging the paintwork of the vehicle.
6. If the washing machine is carried out in accordance with all the rules, the coating will last a very long time.
7. Relatively low cost, and a 10 year warranty.

Best-brand

Currently, many manufacturers produced film vinyl self adhesive for cars. The range of such products is large enough, and don't know which brand you should choose. Don't forget that the vinyl film is different and may have completely different properties. Abroad and in Russia very popular enjoy brands such as Orafol, AUTOMOBILE, 3M, Hexis. Each manufacturer produces a high quality product. But what to choose?

The Japanese manufacturer

3M Company impresses with its technological solutions. Not so long ago appeared on the market of self-adhesive tapes of this brand. Their peculiarity lies in the adhesive layer Comply. This vinyl wrap is easier to apply to the body of the vehicle. It should be noted that this fabric to stick without much trouble even a beginner.

The Main essence of the extraordinary adhesive layer Comply lies in its unusual structure. Due to the presence of small grooves, it removes the air from under the canvas. This, in turn, prevents the formation of bubbles.

German manufacturer

Second place in the ranking of the best brands is produced by Orafol. Different this vinyl is high quality. The German company is releasing a film called Oracal, Orajet, Oralite, Oramask, Oraguard, and so on. Each canvas has its own characteristics. The most popular vinyl film Oracal 970. This is a cast sheet, which has a unique adhesive RapidAir. It is a kind of analogue to Comply.

What to consider when self-pasting

Vinyl on the car allows you to improve the appearance of the vehicle, and also protect its surface from minor mechanical damage. However, the pasting machine according to the material many are in no hurry to address the specialized shops. Most car owners try to self-apply vinyl. Because it allows to avoid additional expenses. However, before you begin, it is necessary to consider some nuances.

First of all, you should know that a lot depends on the quality of the film. Do not chase cheap goods. It is better to buy vinyl made already well-known brands. Only this can serve as a guarantee that the coating will last long enough.

Also, to properly calculate the necessary amount of film. Experts advise to take stock. You can then get to work.

Whyto start

So, how to glue film on the car? First and foremost is to prepare the vehicle. It should be well washed, then dry them. On the surface of the car should be small scratches or other damage. It is also worth to get rid of corrosion. If this is not done, then these areas will begin to flake vinyl. As a result, the coverage over a few months will become worthless.

To vinyl film for cars is well bonded, all surfaces must be degreased. For this you can use regular alcohol or white spirit. After all preparations are done, you can proceed to the fitting and fitting material. Substrate to remove not worth it. The tape should be tried to the site that will oklematsya in the first place. With the help of masking tape should do the marks on the surface of the car. Next is to cut the piece of material. It should be noted that any irregularities call for greater consumption of film.

How to glue film on the car?

On a flat surface is necessary to spread out the cut pieces of material and to remove the substrate. Thus it is necessary to ensure that the surface with glue keep the dust and debris. You also need to get rid of creases. At this stage it is better to ask someone to help. To glue the vinyl on the surface of the car alone is not so simple.

If you have not previously carried out similar procedures, better use wet method. For this the surface with the adhesive should be spray with a soap solution. In this case it is better to use a sprayer. After this film, you can migrate to the surface where it is recorded. This method optionally allows you to adjust the position of the material. If you are sure that you will succeed the first time, you can resort to the dry method of pasting. In this case, moisten the surface is not necessary.

After the material is transferred to auto, it should be smooth. This should be done with a rubber squeegee. You should start from the center of the canvas and move toward the edges. While vinyl should be warm and dry. You can use construction Hairdryer. It should be remembered that the temperature should not exceed 70 °C. otherwise, the material will lose its properties and become more rohkem. In the process, it is necessary to expel from under films moisture and air. Heating should be uniform.

What to do

Vinyl film for cars, where each manufacturer and their range from 7-10 $ 70 per meter, perfectly stretched. This ability allows the material to paste over even the most difficult areas with curves and angles. In such areas special attention should be paid to warming.

After all the moisture and air will be removed from under the vinyl, you need the entire surface dry with a hair dryer. After that, the vehicle should leave in about 30 minutes. Then all surfaces should be treated with a squeegee made from felt. This will remove small air bubbles. The material you need to smooth out. Any excess fabric at this stage you want to delete. It is possible to use a construction knife. But the seams and edges experts recommend treating with a sealant. Vinyl must dry for 12 hours. That's all. The vehicle is ready to use. But within 10 days it is not recommended to move at high speed. Otherwise, the coating will last a long time.