What level of electrolyte shall be battery? Recommendations

Date:

2020-01-06 01:00:16

Views:

551

Rating:

1Like 0Dislike

Share:

Table of contents:

The Modern car has this part of the system battery. She is responsible for the start operation of the motor and all the electrics of the car. During maintenance should eliminate contamination of the battery and check its charge level.

The Procedure for measuring can be performed independently. For this purpose, first of all, you should know What the electrolyte level should be in the battery. Experienced mechanics are ready to give recommendations for the maintenance of the car battery.

Features

Before you know What the electrolyte level should be in the battery, you need to study more the device. There are two types of batteries. They are divided into maintenance-free and serviceable batteries. Lately, the most popular second type of device.

Accepted batteries have the ability when you need to fill the electrolyte inside. However, this would require certain tools. Maintenance-free battery after the exhaustion of the resource are changed to the new device. When such a battery is unsuitable for operation, the led should glow dim green light. In this case, extend the life of batteries is impossible.What is the level of electrolyte shall be battery

The Electrolyte creates a certain environment which accumulates electricity through a chemical reaction. This solution is concentrated sulfuric acid in distilled water. When these two substances interact with each other, a large amount of heat.

The electrolyte Density

Considering What should be the electrolyte level, it must be said about its allowable density. Sulfuric acid in its pure form is characterized by rather high value of this indicator. Its density is equal to 1.8 g/cm³.How to check the electrolyte level in the battery

Recommended

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

The Electrolyte in the battery should not exceed the level of 1.44 g/cm³. The density can range from 1.07 to 1.3 g/cm³. The temperature of the mixture will be about +15 °C. the Quality of sulfuric acid should be high. Otherwise, the battery could quickly come into disrepair.

A Low electrolyte level helps to dry out the internal plates of the device. To restore the battery at the same time would be impossible. Therefore, it is important to know how to refuel the battery.

Why change the levels?

The Level of the electrolyte in a car battery can change due to natural causes. It is normal if the amount of liquid in the tank battery is on its plate at the border of 11-15 mm.

Evaluation of the amount of electrolyte is made by visually. The decrease is due to the evaporation of water from the solution. This increases the concentration of sulfuric acid. The density of the solution is higher than the original values.How to restore battery ways

If in the process of operation of the machine combines all the adverse factors, the battery may be exhausted for almost 1 month. If the driver noticed even small failures in the system, on-Board electronics, it needs to examine battery and determine the level of the inner content.

Level Change in the operation

Before How to check the electrolyte level in the battery, you need to know the peculiarities of its change in operation of the device. Over time it constantly crashes, regardless of whether purchased expensive or cheap battery. From the relay controller determines the speed of this process. If this piece of equipment is faulty, the liquid quickly boils away. Moreover, the timing of this process can be very compressed.

According to experts, the increase in terminal voltage to 14.5 V if the faulty relay-regulator, the electrolyte boils away just a couple of days. The device is likely to require full replacement. To restore it will not work.

If the battery becomes too hot, there are splashes from the boiling of the electrolyte, it is necessary to take urgent measures. At high voltage will come out the air holes for pouring liquids.

Definition of electrolyte level

There are two ways How to check the fluid level in the automotive battery. The first approach to owners of battery housing which has a label. Two parallel lines indicate the minimum and maximum amount of solution inside the tank. Visually assessed the condition of the electrolyte and the decision on further operation of the battery.

For devices in which such marks are missing, there is another way to estimate the number of solution. It is necessary to use a glass tube (diameter 3-5 mm). Opening any tube device, it is inserted in the shield until it stops. how to check the fluid level in car battery

The Hole that is left on the surface, is closed by a finger. Next, the tube is removed from the battery and give you an estimate. The liquid remaining in it, corresponds to the amount of the electrolyte in the tested banks.

The Column of the substance shall be not less than 11-15 mm. This procedure need to producefor all cans. If some of the containers are insufficient, it is necessary to add the solution inside. When the level is above the specified value, or a syringe using a syringe, the excess must be eliminated.

Visual

There is another approach To check the electrolyte level in the battery. It is less accurate, but for lack of available funds also will fit. To do this, loosen the tube hole for pouring liquid. This must be done in good light.the electrolyte Level in car battery

Looking inside the banks, should be assessed, as the electrolyte is in contact with the skirt of the holes down. Each of them should be visible meniscus. Is the surface of a solution which has a semicircular shape. The meniscus between closely spaced walls of the vessel.

In some models the battery has a special indicator. It is necessary to gently tap. This will see the brighter color. Green tint is normal. White color indicates the need to hold the device is charging, and red – for lack of water in the tank.

Expert Advice

There are some rules which are advised to stick to experts. They need to remember, checking The electrolyte level in the battery. Basic rules are reduced to understanding the principle of operation of the device, as well as the implementation of the recommendations of safety.

If the battery has just been removed from charge, the electrolyte level will be high. This is due to thermal expansion. Well of the plates during the charging process to accumulate the bubbles of hydrogen and air. Therefore, experts say that the battery has to cool down completely. Otherwise measurements will be inaccurate.the electrolyte level in the battery main

All work carried out in new rubber gloves. Just in case you need close to supply sufficient amount of clean water. In contact with the electrolyte on your hands, it should be immediately washed off. For these purposes, and requires water. You also need to protect your eyes with special glasses. By following these simple recommendations will allow you to maximize the security measure.

Preparation of solutions

Defined, What the electrolyte level should be in the battery, you can take steps to restore the desired value of the solution. If you want to fill it to capacity, it is necessary to prepare the appropriate material.

The Solution can be purchased or make your own. To create the electrolyte is the right consistency, you need to prepare 1 l of distilled water (available at pharmacies). You also need sulfuric acid in the amount of 0,36 L. to Apply in such order tap water is prohibited.what should be the level of electrolyte

All components are poured into a plastic container. All you need to mix well. After this, the solution close tight lid and leave it for a day. You can then use the prepared tool.

Backup battery

To fill the prepared mixture inside, Unscrew the tube and put it on the fitting holes for ventilation. The tube should be tightly put on the corresponding hole. Further, the tool is poured inside. The plug is tightened and is charging.

Some drivers may wonder, How to restore the battery. Methods works of this process are reduced to charging at low current. The procedure is performed for a long time, then the density may increase slightly. Pour inside the sulfuric acid only at an operating condition of the plates.

By examining What the electrolyte level should be in the battery and expert advice, you can restore the performance properties of the served device.


Article in other languages:

PL: https://tostpost.com/pl/samochody/40155-jaki-poziom-elektrolitu-powinien-by-w-akumulatorze-zalecenia.html

PT: https://tostpost.com/pt/carros/39880-qual-o-n-vel-do-eletr-lito-deve-ser-a-bateria-recomenda-es.html

ZH: https://tostpost.com/zh/cars/49366-what-level-of-electrolyte-shall-be-battery-recommendations.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

"IZH 350 Planeta Sport" – frisky Soviet bike

it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...

Oil

Oil "Petro Canada": customer reviews

car Owners know firsthand how important it is to acquire quality materials for maintenance. They determine the duration of the work. Oil «Petro Canada" reviews, which you can often hear from experienced mechanical engin...

KamAZ semi-trailer: description, technical harakteristiki, capabilities, scope of use, photo

KamAZ semi-trailer: description, technical harakteristiki, capabilities, scope of use, photo

modification of the KAMAZ-5410 series semi-trailer – the most popular trucks in the line of the Kama automobile plant. Their production continued for 25 years and ended in 2002. The demand for the car due to its simplicity a...

The fuel pump on the carb: features, installation

The fuel pump on the carb: features, installation

Carburetor – one of the nodes of the power supply system of the engine. It is designed for making optimum combustible mixture of fuel and air. In the carburetor the gasoline is mixed with air. Also, this element regulates th...

MAZ-503 - the legend of the Soviet automobile industry

MAZ-503 - the legend of the Soviet automobile industry

Equipment of the Soviet production even now surprised many for its reliability, power and durability. Among the most interesting representatives of the automotive industry of the USSR is to provide a MAZ-503.Released on light in 1...

"Ural-4320" with the engine JAMZ: TTX. "Ural-4320" military

Truck production of the Ural automobile plant has a universal purpose. It was designed for the transportation of people and freight. The performance characteristics of “Ural-4320” allow you to overcome impassable place...