The traffic on the ring: SDA. The sign "Circular motion". Rules of journey of crossroads with a circular motion
Table of contents:
Rules of the road have their nuances and subtleties that the novice driver is very difficult to see, to grasp and then apply in practice. One of those situations where you want to be especially attentive, - a journey on the ring. It seems that there is nothing complicated - entered him, driving in the General stream, and turned to the desired rotation. However, this is not entirely true. Before you begin a circular motion, it is necessary to understand the nuances of the passage ring. After all, it is necessary to correctly move in/move out, and take a lane and not impede other vehicles. How to pass the ring?
Rules of the road: the intersection with a circle
In our country traffic flow is moving on the right side. Therefore, the stretch of road on which you drive counterclockwise in a circle, referred to as movement around the ring. SDA reported that the passage around the circle is completed only after the vehicle leaves this place on the roadway.
Signs and markings
The Regulation at intersections of this type occurs without the aid of traffic lights. The sign "Circular motion" is installed at the entrance of the ring. Pedestrian crossings located at the circle are always unregulated. And signs and markings provide for priority traffic on the ring. The SDA has a clear list of all the road elements that are allowed to install on and before the intersection. The signs can be installed before: “Circular motion”, “The road”, “Yield”, “Movement without stopping is forbidden”. The last two reported that priority is given to vehicles in the circle. That is, a car drove up to the roundabout, should be suspended and miss the other vehicles already traveling on it, and only after that to enter. Otherwise, the driver will violate traffic rules, which may lead to the creation of a traffic accident.
Recommended
How does the rear bushing front arm and how many it serves?
The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...
Oil consumption in the engine. Six reasons
It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...
The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...
The “Main road" allows you to move without stopping, without passing other vehicles from the secondary. Therefore, drivers entering the ring, have priority according to traffic regulations.
Entering the loop
In order to be on the circle, you must know what band to call.
For starters, find out if the priority traffic on the ring. This will help you to the road elements. If the sign "Circular motion" is not accompanied by others (“Yield”), then the circle is main, and you coming into it have no advantages. So, you missed the vehicle, and there was a gleam, you can use. Rules teach us that the turn is made with the corresponding extreme of the strip. However, the circular motion is not covered. So the entry is made from any of a number of. As well as on the ring you take the same bandwidth as before crossing. You can not enter from the left row, and occupy the extreme right. This is a flagrant violation.
In some cases, the ring has fewer lanes compared to the previous stretch of road. In these circumstances the driver must be reconstructed in the desired number in advance, according to the SDA.
Traffic on the ring
Turn Signals - devices, which many drivers forget, crossing this stretch of roadway. This is a severe violation, because the passage around the ring may include a plurality of maneuvers, to warn of other drivers.
As already mentioned, it is very important to monitor the technical means of traffic organization in front of the entrance. Sure there will be a sign stating "Circular motion”. In addition it can be “Yield”, “Movement without stopping is forbidden”, and other signs saying which direction is the main.
For the most part almost always the roundabout has priority, but not always other roads are secondary.
Passing through the ring, the driver of the vehicle must follow in its lane and does not become a hindrance to other road users. And when performing the maneuver required to use turn signals. Otherwise, the probability of creation of an emergency.
The turn Signals do not include many drivers, driving in a circle, thereby deceiving other road users. It is therefore necessary to observe traffic regulations. When is done the circular motion, the rules of travel are required to be observed by each driver.
To the junction with the ring frequently abut other roads. The driver needs to think in advance which maneuvers he would do.
For example, direct the traffic on the ring. The SDA does not contain this information, but experienced drivers recommend on the three-lane roadway to stick to the middle row. Despite the fact that your direction has priority, you should still ensure that other drivers see you and miss. So, passing the ring directly, it is more convenient to stay in the right lane. However, this can obstruct the movement of other vehicles. So if you can not take it, it is possible to adjust in the middle.
One of the issues that should be given attention to is the overtaking on the ring. After all, the roundabout is allowed. During his performance, also the obligatory inclusion of turn signals. So you protect yourself and others from accidents.
Turns on the ring
Turn to the right or to the left allows circular motion. Travel rules for the first and second rotations different. Right to carry is much easier. For his performance, will need as it moves to restructure in the extreme range, without interfering with other vehicles. Be sure to use turn signals. Also it is useful to reduce speed.
A left Turn is a bit more complicated, especially for novice drivers. However, having dealt with him once, later you will not feel difficulties. The rotation is carried out only in accordance with the Rules of the road. Therefore, you first need to take the extreme left position on the roadway. As you remember, a maneuver to change lanes is required including appropriate turn signals.
In the case when the road has two rows, to start a movement should be the left, then Congress should change into the right and complete the movement around the ring, pulled off him and rolling up.
When trenbolona round a left turn is performed, essentially, by performing the same maneuver described earlier (with two rows). But in this case you just need to do the rebuild right, not once, but twice. Maneuvering must be carefully and correctly, because you are not the only party circular movements and should remember that any your error and carelessness can cost you a decent amount.
Exit the loop
As you exit from the roundabout, the driver needs to learn one basic rule. Congress allowed only from the extreme right lane. Before that, if you were moving in another lane, you pass cars and then move out.
Pedestrians and their movement around the ring
As already mentioned, transitions for individuals outside of vehicles on range are unregulated. So they need to be held in accordance with the SDA. Circular motion is quite difficult for the passage of motorists, but also pedestrians are often scared of him. Nevertheless, this fear is not justified. As people can quite happily cross the carriageway on the unregulated transition, the main thing-to wait until a vehicle will reduce speed and then stop to let you through.
Traffic movement on the ring: fines
Since there are rules, there are penalties for their violation. They depend on the violation of traffic rules. Circular motion will not hit your wallet, if you conscientiously fulfill all the rules of the road.
The Most common errors drivers:
- Travel in the opposite lane.
- Disregard of the right of priority of the vehicles, moving on the main road.
- When maneuvering were not included turn signal lights.
- Exit the roundabout in any lane except the extreme right.
The Exact size of the fines can be learned from regulatory documents. So, for example, clockwise motion of the driver deprived of a driving license.
The driver of the vehicle who left the ring during the red traffic signal, will receive a fine of about one thousand rubles. In case of repeated violation - five or the deprivation of the right to drive for up to six months. Parking is allowed only five metres before the intersection, that is the exit of the ring. Otherwise, the driver is obliged to pay to the state Treasury about five hundred rubles.
Recommendations
The Most important thing is to choose the correct lane, performing movement on the ring. Traffic rules are regularly updated, therefore it is necessary to follow the changes. Also carefully study the road signs, despite the fact that every day you follow the same route. After all, driving by inertia, you may not notice a newly installed element of the road and as a result, cause an accident. And of course, don't forget before you ring to pedestrians in the crosswalk.
Article in other languages:
AR: https://tostpost.com/ar/cars/20717-sda.html
Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."
Related News
"IZH 350 Planeta Sport" – frisky Soviet bike
it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...
The vent valve crankcase gases: types, structure, working principle
During engine operation are not only exhaust gases. Few people know about the crankcase. At the bottom of the engine accumulate fuel vapors, oil, and water. Their accumulation impairs and destabilizie the operation of the engine. ...
What is antifreeze and why is it needed?
heating and cooling of the cars ' engine work by circulating a special fluid in the system. It is in its properties similar to water. The liquid in constant circulation takes excess heat from the engine and transportorul it to the...
Mercedes CLS 350: features and reviews
Mercedes CLS 350 is an icon of style and technical excellence among the 4-door coupe luxury. This model was the first car, which embodied the perfect tandem of elegance and dynamism, typical of a coupe with functionality and comfo...
no matter How attractive and strong technique, there will always be lovers wishing to make it even better. And this applies not only to cars. Tractors are also subject to modifications. Tuning MTZ will improve the technical charac...
Tire changers for trucks and cars
Quality car repair in remote places almost always requires the connection of the mounting stands. This is a pretty massive structure, which can accommodate the whole machine or individual parts of it. A suitable design of the work...
Comments (0)
This article has no comment, be the first!