Self cleaning injector

Date:

2020-03-01 08:20:09

Views:

570

Rating:

1Like 0Dislike

Share:

Table of contents:

The Most common problem of fuel injection engines – pollution during operation. So, every fifteen or twenty thousand kilometers a car is necessary to clean the injector and nozzles. Due to the high temperature in the engine after its stop, the gasoline disappears completely, and is partially deposited on the walls of the inner parts. This can greatly harm the motor. Possible flushing of the injector with your hands?

cleaning the injectorTo clean it of dirt, there are two ways: liquid washing and cleaning nozzles ultrasonic.

The easiest way – liquid flushing. However, this method is highly questionable in terms of functionality. It consists in the fact that the fuel tank is filled with a special cleaning fluid. However, doubts arise: can all the details of the fuel and propulsion system, the action of these fluids and what is the effectiveness of this whole procedure. Ultrasonic washing – the best option, but without special equipment can not do here. Such cleaning of the injectors is carried out only in specialized services.

Cleaning the injector by yourself 

You'll need duct tape, the light bulb 12V, two foot long hose, push button from the doorbell, a couple of cans of carb cleaner (spray).

  • First, you need to remove the injectors themselves. First detachable flushing the injector with their handsThe battery terminals and wiring. Before removal, the better to record or mark which wire is connected.

  • Further drop in the pressure in the fuel rail. This is done very simply: on ramp is a special bolt that you need to put a little cloth, and then slightly loosen the bolt so that the beginning to ooze fuel. When it stops draining, then you need to tighten the bolt back – the pressure is relieved. After this procedure, Unscrew the bolts that hold the fuel rail and injectors to the manifold, and remove the rest of our design.

    Recommended

    How does the rear bushing front arm and how many it serves?

    How does the rear bushing front arm and how many it serves?

    The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

    Oil consumption in the engine. Six reasons

    Oil consumption in the engine. Six reasons

    It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

    How does the exhaust system?

    How does the exhaust system?

    The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

  • Detach the injectors from the rail.

  • The Nozzle is arranged thus: from one side there is a feed channel, and on the other – is the atomizer, which can becleaning injectors covered with oil-tinged brown color. Some of these items from the channel grid is a filter that also should be cleaned.

After that, you must build a design that will clean our injectors. To do this, securely connect the tube of the canister to the inlet channel of the nozzle. Sometimes you have to use duct tape or even make an adapter from a hose.

Cleaning the injector:

  • Next, you should assemble the electric circuit, which will unclog the nozzle. So, one wire to connect “+” of the battery and prepared the light and “+” on the atomizer. The second wire -  « - » the battery of the doorbell and “ - ” of the nozzle. After that, click briefly on our connected to the nozzle of the spray can and create some pressure, push a button – the atomizer is revealed - and it leaves a small uneven flame. Continue the procedure until, until the flame will not be uniform.

  • After cleaning all injectors collect them in reverse order.

This injector cleaning is completed. After the procedure, ignition on to build pressure, check all connections for signs of leakage. If necessary, retighten everything. If that doesn't work, you will have to change sealing materials for a new one.

When the leakproofness test was a success, and the engine runs evenly, you can be happy, as you have correctly carried out the cleaning of the injector.


Article in other languages:

AR: https://tostpost.com/ar/cars/21312-injector.html

BE: https://tostpost.com/be/a-tamab-l/38856-samastoynaya-chystka-nzhektara.html

DE: https://tostpost.com/de/autos/38393-selbstst-ndiges-reinigen-des-injektors.html

ES: https://tostpost.com/es/coches/38154-auto-limpieza-del-inyector.html

HI: https://tostpost.com/hi/cars/22885-self-cleaning-injector.html

JA: https://tostpost.com/ja/cars/20884-self-cleaning-injector.html

KK: https://tostpost.com/kk/avtomobil-der/39228-studentterd-z-nd-k-tazalau-inzhektora.html

PL: https://tostpost.com/pl/samochody/40873-samodzielne-czyszczenie-wtryskiwacza.html

PT: https://tostpost.com/pt/carros/40560-independente-do-injector.html

TR: https://tostpost.com/tr/arabalar/35741-valesiz-ayakkab-enjekt-r.html

UK: https://tostpost.com/uk/avtomob-l/39668-samost-yna-chistka-nzhektora.html

ZH: https://tostpost.com/zh/cars/21262-self-cleaning-injector.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

"IZH 350 Planeta Sport" – frisky Soviet bike

it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...

Ford Kuga 2013

Ford Kuga 2013

Crossovers – quite popular type of cars in Russia. These machines are in high demand for several years. Crossovers are primarily drawn to their practicality and price, which is lower than the frame SUVs. There are a number o...

How to Polish glass and car headlight? The answers here

How to Polish glass and car headlight? The answers here

Every driver wants his "iron horse” or “favorite girl" in the sense of the car look good. Sparkling body, bright eyes lights, brand new glass and wheels – beauty, whatever you say. But, alas, the tires ...

How to charge the battery of a vehicle: important issue

How to charge the battery of a vehicle: important issue

There are a lot of questions regarding how to charge the battery of the car. In this article will provide a minimum of information about it – a small guide to action. Immediately say that a fully charged battery can las...

A review of MPV Nissan Serena

A review of MPV Nissan Serena

Nissan Serena is a compact four-wheel drive full-size van. The first such vehicle appeared in Japan in 1990. And since the end of 1992, it is produced in Spain.the body of the car is quite high (1 m 84 cm). The vehicle length is 4...

Mercedes 600, the legendary car of the past

Mercedes 600, the legendary car of the past

the Family of Executive cars Mercedes 600 would be more correct to call it a dynasty, whose history began back in 1924 with the release of the limousine Mercedes 140 PS. In 1926, the automobile company Mercedes has been renamed to...