Bicycle computer how to set? Cyclotech bike computer i6: setting

Date:

2018-03-27 13:52:15

Views:

1045

Rating:

1Like 0Dislike

Share:

Table of contents:

Today in the market you can see several types of tables. Usually they klassificeret on connection type.

Classification tables

There are 2 groups:

  • Wired computer which is pretty cheap and easy. However, it works as a device of a different type. The problem with them may be only one – a setting that is quite easy to solve.
  • The Second type-a wireless. These tables are pretty easy to install. It can be put anywhere, until the application on the phone. Of course, this type has disadvantages. The sensor, which is attached to the wheel, you need to install a separate power supply. Also, these models are quite expensive.

This is the main difference of the Assembly, but the producers have divided them by functionality. New and expensive models you can find a lot of additional features. This can be a training mode, GPS, memorizing distances and others. The best models have a wide functionality and excellent appearance. Pretty good and budget model – Cyclotech i6. Consider setting the example of this computer.

Bike computer, how to set?

Setting the bike computer

Mounting pad

First you will need to install mounting pad. What is it? Computers now are made removable, so there should be some mount to stay on the bike. The mounting area is a bar which is connected to necessary wires and fixtures. Install the bike computer Cyclotech i6 possible in several places.

  • Stem – quite a convenient place. The wheel mount you can install a bike computer of any size. It's a pretty comfortable place to navigate while riding. Unfortunately, the computer will be prone to breakage due to transfer or drop. Also this place is very often installed GPS or smartphone.
  • At the center of the bar – the best decision if you have the bike built and other devices. This place is harder to catch the bike and break it. You will also be able to slightly look away from the road to look at the screen of your device.
  • The Last place that I often use people – on the edge of the grips. Of course, it will be easy to catch, but at the same time, you can quickly gain access to control this device. It is close to hand that makes it quite comfortable to change the settings while riding.

Cyclotech Cycling Computer i6 must be set accurately. You have to make sure that all bolts used for mounting mounts, well tightened. This will depend on the comfort when riding and the integrity of the device.

Recommended

How to get out of

How to get out of "Skype" on the "Android" and not only

How to get out of "Skype" "Android"? This question bothers many users. The thing is that the messenger is not so difficult. But there are features that are only for mobile versions. To log out of Skype in this case more difficult than it seems. But i...

Kingo ROOT: how to use the program to gain administrative rights on Android

Kingo ROOT: how to use the program to gain administrative rights on Android

The Gadgets on the platform Android regained the lion's share of the market. Developers are continually perfecting the OS, trying to fit the needs of the users, but from year to year admit palpable mistake: forbid the owner to "stuffing" of his gadge...

How to get from Stormwind to Tanaris: practical tips

How to get from Stormwind to Tanaris: practical tips

World of Warcraft is an iconic MMORPG, uniting millions of players around the world. There are many locations and puzzles, secret trails and larger, but rather dangerous paths. Sooner or later, every player chose the side of the Alliance, we have to ...

Cyclotech Cycling Computer i6

Installing the sensor and magnet

The Next stage of the installation of bike computer Cyclotech i6 – installation of magnet and sensor. The quality of the configuration of these components will depend on the correctness of the indications. From the hub of the front wheel must retreat 10 centimeters, the centrifugal force will not act on the magnet. The sensor and the magnet can be installed on either side, it will have special meaning.

To install the sensor, you need to take a few flagella, with which you bind this element. Next, you need to install it on the plug. The sensor must be mounted perpendicular to the wheel. The magnet and sensor bike computer Cyclotech i6 must be mounted perfectly perpendicular. Unfortunately, because of the spokes this will work quite difficult. Try to approach the benchmark to get accurate information.

As you may have noticed, you need to mount the magnet on one of the spokes of the front wheel. Install it perpendicular to the sensor. After mounting, you should check to see if 2 elements. Remember that you need to install good quality, so that during the movement of the magnet fell off the wheel.

Sometimes set the necessary items on the rear wheel. So if you would prefer, then you can try. Of course, you need to calculate the length of the wires for this. Install the magnet and sensor in this case is a little simpler, but will need to secure the wire to the frame.

Bike computer Cyclotech

The Wire

After installing all the necessary elements to take care about the wires. They must be carefully placed so as not to spoil the appearance of the bike and also so they don't hurt other mechanisms or do not interfere with the repair.

First, you should determine the length. Route the cable to the sensor and add a little in length, as it is impossible to eliminate the error. Continue to cut off the excess part. You can then pull the cable through. For this you can use several methods, choose which will be more convenient.

  1. Strip contacts on the steering column. In this case, you need to use the cords to secure the wire to the frame. This is a very simple method, but many don't like it, as appearance plays an important role. But this is not the only disadvantage, you can quickly ruin the contacts due to twisting of the steering wheel.
  2. The Second method involves the laying of wires on the cable from the brake. This, of course, is longer, but looks much better. To secure the wire from the Cyclotech Cycling computer on the cable, you must use the tape.

Ifyou are using a wireless computer, no need to bother with transactions. This greatly simplifies the installation and looks better.

Setup computer

How to set a bike computer?

The circumference of the wheel

When configuring first, you need to enter the circumference of the wheels. This parameter is very important for the correct operation of the device, as it determines the accuracy of the results.

To determine the exact length of a circle, put a dot on the tire with a marker. Then mark the appropriate place on the pavement. Do full wheel revolution and measure the distance travelled by Bicycle. This is the most effective way.

You can Also look at the wheel its diameter and thickness and find the table which will give the circumference for a particular model. In some tables only need to enter the wheel diameter, which simplifies the task.

Cyclotech Cycling Computer i6. Setting

Watch and other indicators

Cyclotech Cycling Computer i6 allows not only to determine the rate of acceleration and the distance you traveled, but also provides some useful additional capabilities.

  • The First and quite a useful feature – watch. They are simple to configure, it usually does not cause problems.
  • Calorie Counting. This is a useful option that is also popular. To configure it you need to enter your weight. It should be carefully done, so as often use different units of measurement. Most all use the pound.

Potential problems

If you figured out how to set the bike computer, you can get to it. It takes a little time if all goes well. Not always. Sometimes, there are problems that need to be able to remove.

Bike Fusion

  • What to do if the computer won't turn on? Usually it's in the battery. She can sit or move away. After replacing the batteries, all settings will be reset.
  • Computer mounted on the bike shows the wrong speed. In this case, you must return to the points how to install and how to set a bike computer. The problem lies in this. So how could you specify an incorrect size wheel or produce poor-quality installation of magnet and sensor.

Conclusion

If you decide to install a bike computer, Primarily Cyclotech or other high-quality firm, then you can quickly all set. This is a pretty simple procedure, the main thing – carefully perform each step. Now you know how to set a bike computer.


Article in other languages:

AR: https://tostpost.com/ar/computers/3568-cyclotech-i6.html

BE: https://tostpost.com/be/kamputary/6281-vela-kamputary-yak-naladz-c-vela-kamputary-cyclotech-i6-stano-ka.html

DE: https://tostpost.com/de/computer/6280-fahrradcomputer-wie-einstellen-fahrradcomputer-cyclotech-i6-installati.html

ES: https://tostpost.com/es/los-ordenadores/6286-velokomp-yuter-c-mo-configurar-velokomp-yuter-cyclotech-i6-instalaci-n.html

HI: https://tostpost.com/hi/computers/3570-cyclotech-i6.html

JA: https://tostpost.com/ja/computers/3569-cyclotech-i6.html

KK: https://tostpost.com/kk/komp-yuterler/6283-velokomp-yuter-alay-ornatu-a-bolady-velokomp-yuter-cyclotech-i6-ornatu.html

PL: https://tostpost.com/pl/komputery/6285-licznik-rowerowy-jak-skonfigurowa-licznik-rowerowy-cyclotech-i6-instal.html

PT: https://tostpost.com/pt/computadores/6281-como-configurar-o-computador-de-bicicleta-computador-de-bicicleta-cycl.html

TR: https://tostpost.com/tr/bilgisayarlar/6287-bisiklet-bilgisayard-r-ayarlamak-nas-l-bisiklet-bilgisayard-r-cyclotec.html

UK: https://tostpost.com/uk/komp-yuteri/6285-velokomp-yuter-yak-nalashtuvati-velokomp-yuter-cyclotech-i6-ustanovka.html

ZH: https://tostpost.com/zh/computers/3876-cyclotech-i6.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

ASRock H61DEL: the ideal solution for budget systems

ASRock H61DEL: the ideal solution for budget systems

mainboard model ASRock H61DEL was aimed at creating the most affordable budget computer systems within a computer platform LGA1155. To such it belongs to indicate the technical parameters and cost. It is about this computer access...

How to make a static IP?

How to make a static IP?

Today, many people at home have not one computer but several, and usually they are connected to the LAN. In this case, each of them must have a permanent IP address. This allows users to freely share files that are stored on diffe...

What is backup? How to backup on Android?

What is backup? How to backup on Android?

people who are somehow connected with IT, goes a sad joke about the fact that users are divided into two types: those who make backups and those who started them (!) to do. If you have never been faced with a complete loss of all ...

How to play

How to play "GTA" on the network

Today we look at how to play "GTA" to network with one another. Computer games in our lives takes a lot of time. One of the most interesting is GTA IV.instructionsConsider all the ways of the game "GTA" on the ...

Best ipad apps: overview of popular programs

Best ipad apps: overview of popular programs

When used correctly, the iPad it can be a great assistant in many cases as to the student, and businessman. With the help of gadget you can read e-books, making various sketches and notes, view videos and much more. Best iPad apps...

How to get money for the review in the Internet?

How to get money for the review in the Internet?

the Internet is a powerful place in each of our lives. Many users of this network simply killing time on pointless viewings of the sites, download unnecessary content and commenting of records that, in fact, absolutely not importa...