Hamster of gum. How to weave gum hamster

Colored rubber bands are an excellent material for creating a variety of jewelry, including bracelets and bows for hair, keychains, and three-dimensional toys. It is to the latter category belongs to the hamster out of loom bands. Of course, weaving this DIY is not one of the most simple types of activities, however, with enough patience, any seamstress will be able to make their own hands this lovely little animal.

Weave the hamster out of loom bands: what you need to prepare?

The Main material required for the manufacture of these crafts, as you've probably guessed, are gum. They can be as plain or multiple colors, depending on what animal you want to get a result. The most realistic hamster of gum would look like if its making use of gum orange or brown (for the back) and white (belly and legs) colors. In addition, you will need a pink or red gum for the nose and two black for eyes. Just need 100 pieces.

In addition, you will need 2 clips to secure 2-3 hook, toothpick, and a special machine for weaving because the hamster out of loom bands on forks cannot be done.

The Weaving of the legs and ears of a hamster

Before you start making the torso of the little animals, you need to weave 4 paws and 2 ears. Of course, this can be done a little later, but then need to break away from one activity and switch to another that is not very convenient, because it can lead to confusion, especially for those knitters who have just learned how to make a hamster out of loom bands and trying to apply new information.

Recommended

The rating icons in silver. Assessment of ancient icons photo

The Old Orthodox icons are of great interest to collectors worldwide. It is not only the object of aesthetic and spiritual enjoyment. Old icons are a win-win investment. As a special kind of antique, these are highly appreciated in the market, and th...

Crochet swimwear crochet

So you want to be different! So you want to be irresistible! So you want to see on the figure admiring glances and hear behind rapturous sighs.  Although rare, a woman openly admits it. and don't! You just need to tie swimsuit crochet, so&hellip...

Conclusion

Artistic gymnasts, for whom sport – this is life, the lion's share of time to devote to training and participation in competitions. During this period, they manage to demolish more than a dozen gymnastics leotards. So mom young athletes are con...

So, for the weaving of the back legs will need 3 white gum. Two of them are required in four turns wound on the hook, and the third to pass through the formed loop. To prevent the unwinding of the items received through the two loops formed by the third rubber band should pass the toothpick or hook, if you have extra. Likewise, it is necessary to make 2 front legs and two ears, but instead of white use orange or brown bands, depending on what color the back will have a future hamster out of loom bands.

Features of the weave of the torso and head

To Start making little animals need to correct the location of the machine, it must be set so that the average number in 1 element was pushed forward, and all the bars are turned a notch to the right. Weave the hamster out of loom bands suggests the presence of 9 ranks. It is worth noting that in the middle for the needle series of the machine will form the back of the future animal, and far – the abdomen. So, if you plan to manufacture realistic animal, it is necessary to consider in the course of work on the bottom row and the sides of the machine to throw orange or brown bands, and on the top – white. As a result of such netting will be a hamster with an orange back and a white belly.

The Initial stage of weaving of the trunk and attach the rear tabs

Having Prepared all the materials and taking into account the features of production figures, you can begin to weave the first row. For its formation it is necessary to connect all adjacent columns with elastic crossover «eight». Since you are only acquainted with the information on how to weave gum hamster, you should also keep in mind that to start creating the first row should be on the speaker column, and then move to the adjacent one, forming on the machine the hexagon. Side should consist of four elements, then it is necessary to make the ledge and close the row.

Now you already know how to spin the hamster out of loom bands in the beginning, however, the production of the second series has its own characteristics. It is necessary to attach the hind legs, which were made at the beginning of the work. Start weaving the second row again with the speaker bar, wearing an orange rubber band on it and on the neighboring element the far side of the machine. Then on the first column of the top row, you should throw a rear leg for one loop, in the second it is better to leave a toothpick or hook. Further, since the same column, must be worn 3 white gum, connecting the neighbouring elements. In the last column in this row need to throw the second hind leg, the same way as it was done with the first. Continue weaving round to his circuits have an orange gum.

Removing gum and continued weaving

After the second row it is necessary to remove gum from the machine. To do this, they bottom pair on each column, you should grab a hook and through the outer edge to throw in the middle of the machine. These activities need to be done around the circle. The result is one of the back legs needs to be between the first and second columns, and the other between the third and fourth. Now you need to learn how to make a hamster out of loom bands in the third row.

In a circle, starting from the first column of the far range, should be wornthe required number of bands: first 3 in white, then the rest – orange. The fourth row is woven in the same way as the third, and then the gum must be removed the same action that was done after the second row.

In the course of manufacture 5 of the terms will need to lock the rear legs. On protruding and the first top row of the columns of the press should wear a rubber, then in the last it is necessary to catch with a noose, which still was on the hook foot. The netting must continue until, until you reach the last column of the top row, which will also need to put the second loop one hind legs. To close the circle should have known.

Although you still don't know how to weave gum hamster completely, how to remove the loop, you already know, and that this will need to be done at the end of this series. The next round is similar to the third, and then removed.

Joining the front legs and ears

On the 7th row you must throw front paws and ears that you spun when we first started to get acquainted with the information on how to make a hamster out of loom bands. Hind legs are attached to the upper side of the machine. This rubber band should connect the speaker and the first extreme number of columns. Then the last to throw one loop of the front legs, and on the next – the second. The next two columns to join another band, and then likewise the first to put on a second front leg. Next, you need to continue the netting and on the front side of the machine to throw the lugs. To do this, follow the same steps as in the fastening of the front legs. At the final stage of this series it is necessary to remove the gum using an already known principle.

Netting eyes and their connection with the body

But what kind of animal without eyes? And that they need to do, and then to weave in the 8 a number of crafts. For making eyes need to take a black rubber band and in four turns winding its hook, and then throw the resulting loop on the orange. Such details, of course, must be two.

Next you need to throw the gum, since the speaker bar and circle over the top edge of the machine. On the bottom side in those places where the previous row was thrown over the ears, you must likewise secure your eyes and close the circle. Then the gum need to re-shoot.

Formation of a muzzle of a hamster of gum

The Back and abdomen of the hamster is ready, it remains only the face. For its manufacturing the next, 9 the row, you should weave in the usual way, but only from the orange gum. At the end of the round its loop must be removed as above. All series completed, but the hamster out of loom bands is not yet ready, it needs to be removed from the machine. For this loop all columns should be collected on a single hook, and then through them stretch the orange elastic band.

If you are not able to move all crafts on a single hook, you can use several. However, as a result, all loops must be collected on the same band, which should be possible to delay, and using the ends to tie a clip to the opposite side which will be attached to the nose.

For making the last detail must be worn “eight” on the machine with pink gum and then one the edge one more time to twist and throw back to two columns. Further, the bottom gum you need to remove on the top, which will turn the nose, which should be attached to the other edge clips. The item to be inserted inside the articles, leaving the bulk of the pink nose on top.

Shaping the back of the toy

After conducting these steps, the seamstress will be able to see the face of the animals, however, it will arise immediately the question of how to do the hamster out of loom bands on, because on the opposite side of it turned out a hole. It needs to close. To do this with a hook should be collected in a circle all the external loop, thread through the elastic band and dragging.

In order to avoid slipping of the loops to the “tail” it is necessary to attach the clip and hide it inside the crafts. Then the hamster will only be good to spread, to stretch legs, ears and can be attached to keys as key ring or to give someone as a gift.