How to choose and wear the belt on the washing machine? When you need to replace it?

Modern washing machine is a device which is of great importance in every house. The apparatus has a complex structure, where all components are interrelated. And it would seem that such a simple item, like a belt on a washing machine, in the event of a fault can stop the whole process of washing. If this detail was the cause of the malfunction of the entire apparatus, to produce repairs with their own hands, without the help of the wizard. The key is to know where to buy belt for washing machines suitable model and how to spend it installation.

What is its significance?

Despite the simple structure, belt drive is of great importance and is an integral part of the washing machine. It connects the engine and the pulley in tandem, which leads the drum in motion during execution of the washing programme. When connecting the mechanism breaks or flies off, the machine stops wash.

It is Worth noting that this element is present in all modern models. For example, the belt on this washing machine is not provided. The drum motor on these machines are connected directly. According to the manufacturers, this technology allows to reduce the level of vibration.

Cause

When connecting the motor and drum link flies for the first time, in most cases it does not lead to serious consequences. This can occur due to exceeding maximum limits of loads of Laundry or imbalance. Simply put the belt on the washing machine. If such a malfunction occurs periodically, will have to figure out the cause. There may be several reasons:

Recommended

IPTV settings "Rostelecom". IPTV channels

Analog TV is gradually disappearing into the background. His place faster pace is a free IPTV Rostelecom. And it's really convenient, because digital channels to look better because of better picture, sound. But first you need to clarify some points....

IMEI: how to change the phone yourself

If you need to change the IMEI on your phone, this article will provide complete and correct information about what is IMEI code, what is it for, and how to change it.What is IMEI you May have already encountered this concept, then you know that the ...

Washing machine Bosch MAXX 4: operating instructions

All well-known manufacturer of Bosh, before you present to the world another new, not only conducts many tests, but uses all available methods to ensure maximum safety. To washing machine MAXX 4 pleased his master as long as possible, the set to her ...

1. In use, the strap has worn. This is the main reason. Most likely, he's just worn out and therefore requires replacement.
2. Incorrect mounting of the pulley. Because of the constant vibration during the spin cycle it can become loose. In the case of diagnosing the problem the nut or bolt with which it is attached to the shaft of the drum should pull up.
3. Weak engine mount. It is necessary to check and, if necessary, to tighten.
4. Deformation of the shaft and pulley. The reason can be a violation of a belt transmission during the Laundry process or a factory defect. If this is a newly purchased machine, you should contact the service center for diagnosis and repair or replacement of the washing machine.
5. Relaxed cross. The shaft is attached to the tank with this item. Cross in the process of operation could burst and cause imbalance. You need to change and tighten the bolts.
6. A Pulley or belt on the washing machine was installed incorrectly. Often this happens after a recent repair. If you cannot resolve the problem yourself, it is better to call a qualified professional to avoid damage to other parts of the apparatus.
7. The Malfunction and deterioration of the bearings. It's part of the support structure, which provides a uniform load on all parts of the apparatus during washing and ensures the smooth process of the swing with strong momentum.
8. Belt drive breaks in a narrow washing machines. It just frays in the wash about the hull.
9. The Resulting crack on the pulley. This item is made of brittle metal, and if not work it falls apart, which leads to wear.
10. In the case when the washing machine is not used for a long time, the belt is crack and tear in the washing process.

How to choose a belt for the washing machine?

If the cause of the fault is established and to fix it you must replace the binding motor and a drum device, new issues arise. Where to buy belt for the washing machine and how to select it?

Masters are advised to purchase spare parts for household appliances only in specialized shops with certified products. Do not buy items via message boards, even if it is not used. Big risk to buy a defective product.

All belts vary in several ways:

• Length;
• The type profile of the wedges (J and H) and their number;
• Marking.

To choose the right belt for a washing machine, it is best to look at the markings on the old product. It consists of five numbers and letters, for example 1023 H7.

Changing the belt on a washing machine: user manual

1. The Device is disconnected from the mains.
2. Washing machine turns around so that was free access to its back wall.
3. End the screws that hold the protective cover.
4. The Old product is removed, and in its place establishes a new the following way: first put on the belt on the motor, then spinning the shaft, pull on the pulley. The principle is similar to fitting a Bicycle chain.
5. Strap exactly fits into the groove.
6. To test the operation of the pulley rotates several times.
7. Protective cover is inserted into place and fixed by a retaining bolt, washer set back. Repair work on the belt change completed.

Conclusion

If the cause of malfunction of the washing machine was connecting the motor and the drum device, before you change the belt you needto buy a suitable product with the appropriate marking. The repair process is quite simple. It can be done yourself, without calling the wizard.