What light bulb is better led or energy saving? Description, specifications, characteristics

In Europe, even at the household level have not meet the traditional incandescent bulbs. Replace them with fluorescent or led counterparts, which are superior to the outdated light sources based on various criteria. In Russia the process of updating the lights started just a few years ago, but still we can't talk about desire of users to abandon the familiar devices. In part, this attitude can justify the high cost of more technological goods, and the spread of rumors about their health risks. But, as practice shows, the aggregate operational qualities of the modern lighting is the best solution. It remains only to decide what light is better – led or energy saving? Both versions appeared on the market relatively recently, but to this day most consumers there is no clear idea about the properties of these products.

Features of led models

One of the main characteristics of the work lamp is power. It depends on the brightness of the light beam, but also power consumption. To the characteristics of led devices include the reduction of the influence of power on the consumption of energy. In such models, the figure has a wider range, but standard-it is in the range from 4.5 to 15 watts. The advantages of the lamps for led bulbs, can be attributed to the possibility of regulation of parameters of a light beam based on the minimization of electricity consumption. The brightness of light is measured in lumens and the ratio of this indicator with the power Led models can be called one of the most profitable. So, the light bulb 15 W corresponds to a brightness of 136 Lumens, and the models are 25 watt – 249 LM.

Recommended

IPTV settings "Rostelecom". IPTV channels

Analog TV is gradually disappearing into the background. His place faster pace is a free IPTV Rostelecom. And it's really convenient, because digital channels to look better because of better picture, sound. But first you need to clarify some points....

IMEI: how to change the phone yourself

If you need to change the IMEI on your phone, this article will provide complete and correct information about what is IMEI code, what is it for, and how to change it.What is IMEI you May have already encountered this concept, then you know that the ...

Washing machine Bosch MAXX 4: operating instructions

All well-known manufacturer of Bosh, before you present to the world another new, not only conducts many tests, but uses all available methods to ensure maximum safety. To washing machine MAXX 4 pleased his master as long as possible, the set to her ...

Another significant feature – is the light temperature measured in Kelvins (K). Led models are quite varied in this parameter. For example, there are options to 3300 K, which provide the so-called warm light. Standard is the measure of 4000 K. It is natural or fluorescent light – the best option if you want to provide lighting at home with natural characteristics for our perception. Less common "cold" light, which corresponds to a rate of 5000 K. It is usually used in special cases, for example, in production.

Feedback on led lamps

The Led lamps are positioned as devices that provide high-quality and pleasant lighting with economical energy consumption. And users confirm these qualities. It is also noted the variety of designs of cases for such products, which allows with minimal effort in editing to implement any configuration of lighting systems. After the transition from traditional models for ceiling, led light bulbs, many report a reduction in energy costs 200-300 rubles a month.

Now you should go to the negative user feedback such lamps. Although the radiation in the spectra as a whole is a favorable opinions with the supply of electricity loses even the incandescent bulbs in the parameters of dispersion. Partly this is due to the desire of interior designers to use multiple spot LEDs to cover the whole space. Therefore should be prepared in advance to ensure a narrow stream that led bulbs provide. How to choose a suitable option for the implementation of optimum system with Led lighting – this question is largely determined by the needs of the user. The best application of such models implies the organization of separate zones with lighting.

Best led bulb

Experts evaluate the quality of lamps by matching according to the manufacturer data with the indicators identified in practice. As shown by tests, the most represented in the market of lamps do not correspond to the characteristics indicated on the package. For example, if applying for a power of 20-30 W, there is a risk to the actual data for 15 and 25 W, respectively. At the same time, the more powerful the claimed rate, the higher may be the gap with the actual data. In this respect the most reliable manufacturers should include the brands Verbatim, Philips and Osram. We can say that this is the best led light bulbs, as their users get performance closest to the one specified in the labeling characteristics.

Features of energy-saving lamps

Fluorescent models provide lighting according to other principles. The fourth part of the energy they transmit as heat, and the remaining fraction is converted into light. The power range of these devices varies from 7 to 250 watts. However, it is not necessary to consider these values from the point of view of conformity to the incandescent lamps. Power ratio energy saving models to traditional sources – 1 to 5. Further, based on the characteristics of the light recoil, you can approach the answer to the question about what light is better – led or energy saving. As already noted, Led-models a ratio of the power characteristics of the light flux optimally and suggests the possibility of regulation. In turn, energy-saving lamps show the ratio of the lightreturn to the power in the range of 10-15 LM/W. This is a low figure, so the preference in the evaluation of this criterion it is better to give the led lamps.

Testimonials about energy-saving models

These devices are popular mainly due to economical energy consumption and the possibility to provide light for a large area. As noted by the manufacturers, even the entry-level is able to serve not less than 7 thousand hrs., what also attracts a lot of buyers. However, the feedback about the lamps of this type after prolonged use note the irregularity of the glow. Energy-saving models provide good dispersion and brightness, but the light can be tiring. In addition, specific base causes many problems in the installation – in any case, after installation, the design looks rather sloppy. But the main fear of the users of these lamps refers to the mercury content. Because of this nuance, many refuse to fluorescent products. Otherwise, you should exercise extreme care in handling gassy devices.

Energy saving lamp

Previously mentioned fluorescent lamps, which are a kind of energy-saving models. Both species belong to gas discharge light sources, but with different characteristics. So, in the case of fluorescent versions is higher luminous efficacy, therefore, it is desirable to use for household needs. Traditional incandescent lamp energy saving more often used in public areas, institutions and industries. In both cases, to identify the optimal variant should be guided by two characteristics-capacity and durability. As a rule, high demands for lighting, these models do not assume. To cover the average room area is big enough for 15-20 watts. Index-of-life matters from the point of view of the characteristics of the light flux. The more the working period, the less light output.

Comparison lamp

For starters, it is worth noting the overall advantages of these kinds of lights. They share the economic benefits from the use of, durability (though Led models have a slight advantage) and providing sufficient light. Now you can move on to the issue about what light is better – led or energy saving? The first option is useful if you plan and design the focus of the lighting system. These models differ in aesthetic appearance and organically included in modern interiors. Fluorescent models – not the most attractive option in the aesthetic respect, but with proper installation also will provide a decent result. The advantages of led lamps included and their safety for health, while the discharge analogs are potentially hazardous due to mercury content. Thus, on set of qualities it makes sense to refer primarily to Led technology, even though such products are more expensive.

Other lamps

There remains a demand for classic incandescent lamps, and more modern halogen model. These types of lamps lose led and energy-saving devices in terms of cost and durability, but thus and have their advantages. For example, the halogen versions, perhaps the best light output. On the market they are presented in different versions, which differ in design, size and shapes.

Incandescent bulbs are also not fading. To a large extent this contributes to their affordability. The cost of one product is in the range of 100 rubles., which is very attractive against the background of expensive LEDs. Besides, thanks to the incandescent lamps you can get a quality home lighting, not tiring eyes. Main – to get models from reputable manufacturers.

The Nuances of optimal lamp selection

Not to be disappointed in the choice initially should be based on specific requests. In some cases, for example, is not justified and the purchase of modern high-tech versions, so it is important to determine the requirements. So, for long term operation in a house or apartment it is advisable to use led light bulbs. How to choose a suitable option? First, to account for the area of lighting, which will allow you to determine the appropriate capacity. Secondly, you need to consider the location and installation scheme – it will help to choose the right size and shape of the lamp. Energy saving models are appropriate to use in large commercial premises. Attention when buying should also be given to size and power.

Requirements for lamp

Contrasting kinds of lights, don't ignore the characteristics of the lamp. Largely this shell determines the quality of light and appearance of your vehicles lighting. Today there are compact ceiling lamps, and a massive ceiling, and delicate sconces – the choice is determined by the individual user requests. However, different types of lampsdifferent shape of the cap, which may limit the choice of lamp. For use at home is designed plinths minions from the labeling of E14 and E27. By the way, the second number indicates the diameter of the connector in millimeters. Demand and skirting GU, which is designed exclusively to work with lamps of 12 V.

Conclusion

One of the most reliable approaches to the selection of a particular device involves an assessment of its shortcomings. This principle can help answer the question about whether what light is better – led or energy saving? Among the major drawbacks of Led models should highlight the narrow focus of light, the high cost and specific illumination, which can irritate the eyes. As for the disadvantages of energy saving lamps, they are expressed in potential harm to health and, again, at considerable cost. Thus, for premises by far, the best choice would be the led lamp as a safe, beautiful and economical light source. The same advantages in minimizing costs is to provide in non-residential premises with energy saving lamps. The mercury content in this case is not so dangerous.