How to make plasterboard ceilings: recommendations

Before talking about how to make a ceiling of plasterboard, it is necessary to tell about what constitutes the material. Let's face it. Drywall is the most popular material intended for interior finishing of any premises in which there is a low level of humidity. It can be used for walls, slopes, and also to align the ceilings and walls. If you make a ceiling of plasterboard, it will be a quick convenient way to get a smooth surface. Before proceeding with the installation of such a system, it is necessary to clean the surface from old coatings, and joints of plates putty is not necessary, since the new ceiling will hide all these shortcomings.

How to make plasterboard ceilings

Before you start fastening sheets of material, it should build the frame of the future design. First, you need to mark on the wall perimeter, which will be useful hydrolevel any. Along these lines should be fixed UD profile. When a small area of the room enough to insert a few SD profiles that will be cut to size. With screws on them to secure the sheets of material. A similar technique is inappropriate in a room where the ceiling space is large enough, as due to heavy load it may SAG. If we talk about how to make a ceiling of plasterboard in this case, it is appropriate to note that the profile through a specified distance must be fixed to the ceiling by special brackets. Level control can be done via a taut line.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Other

You Can make a two-level ceiling of plasterboard. This requires to think in advance the outlines of the future design. Should make patterns out of cardboard the desired shape, then right to manufacture and fix the details. These ceilings look quite impressive, allowing you to create a unique interior. Such a layered structure can be used in conjunction with suspended ceilings. If you are wondering how to make a ceiling of plasterboard in this case, it is necessary to say that the line which is marked on the first layer, it is necessary to fix the radius profiles, which are made from ordinary, through a pair of snips. This requires you to perform cuts every couple of inches, and then bend the profile. Then you need to fix to the first level in those places where there are ribs, and then mounting the stiffeners similar to the first level. Patterns can be used for the pattern elements of plasterboard, which then requires to fix to the profile. Bonding is performed by means of special screws with caps of a conical shape, which will allow them to hide in the drywall.

If we talk about how to make a ceiling of plasterboard, it should be noted that after construction of all elements required to make plastered surfaces to prepare the final painting. Around the perimeter of the premises should stick polyurethane ceiling plinths.