Child recumbent with their hands - a detailed description and diagram

Every child is a restless need somewhere to channel their unspent energy. The perfect solution - purchase a children's vehicle. But there are times when to buy a child a new bike or a machine is not possible. Recumbent, with their hands made, that will be truly valuable gift for your baby, and most importantly, this option will cost parents less money.

What is a velomobile?

Children's recumbent is a something between a Bicycle and a car, otherwise it is called a hybrid car and bike. In Europe this type of transport for children called velomobiles, and in the Netherlands - Yes-penalties.

The exterior of this unit looks like a miniature copy of a normal car, the only thing - it is controlled by using the pedals. It is economical, environmentally friendly and easy to use ride it comfortably and easily.

Recumbent

This is the vehicle for paved roads. Unlike a Bicycle, the velomobile has the automobile or similar seat. In addition, the hybrid is more streamlined than the bike, which allows him to travel faster. From the recumbent bike is distinguished by the number of wheels may be three or four, and they are built not in one line. Plus, the ride it is much easier, no need to keep the balance.

What you need to know about child recumbent?

Before you make a recumbent with their hands, you need to understand that the safety of this transport is of paramount importance. So the kids went without falls and injuries, and parents were calm, you need to give this issue special attention. It is desirable that the frame of the hybrid was created from sturdy metal, and the wheels are securely fastened. For external security, implementation of these items will be enough and even a large rate of acceleration will not prevent a comfortable pastime on a recumbent. Internal security vehicle depends on the reliability of the driver's seat, it should be well-fixed, this will avoid possible injuries and shock.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Description of the design of the velomobile

Many parents wonder, "How to make a recumbent with their hands?". With careful preparation, viewing of drawings and literature, this task becomes quite doable and not so difficult as it might seem at first glance. Of course, to get a decent result you will have to try and effectively combine theoretical knowledge and skills.

In the first place is to pick a model, decide how much will be seats, wheels, etc. we should Not forget that the body of the velomobile should be quite spacious and roomy.

The design of the velomobile - standard carriage, which can be found in any road bike. The leading gear (asterisk) basics of design circuit is connected with the reducer, which is located under the driver's seat. It is attached to the side members of the frame using special brackets. The second chain is connected with the multi-speed gear sleeve rear wheel.

Special attention should be paid to the driver's seat. It is better to create a mesh material, it is stretched on the seat frame and the back cinches with a drawstring. Some people prefer faux leather or tent fabrics, however, mesh materials are more common.

With regard to another essential design details of the velomobile - cab, from its installation depends on the flow of the whole vehicle. It is usually put on the pipe, which is located on the frame.

How to build a recumbent with their hands?

To proceed directly to the Assembly of a hybrid vehicle for children from two to five years, you will need two frames, preferably symmetrical to each other. They need to seal between a steering mechanism, which will be located in the middle of the unit.

U-shaped front frame must have a support from solid wood materials, which are mounted on the crankshaft with pedals and wheels. By the way, shaft is better to make a metal rod with a size of 10 mm. Rear frame must be V-shaped, with the same supports where attached wheel and axle. In the middle you need to install the crossbar with a pin, which will be a support for rolling the front frame.

Kids recumbent with their hands can be made from improvised means, for example, take the tube from old or spare cot. The rear axle can borrow from the old bike, besides the wheel and the wheel still the bike will make the Assembly process even easier. If not, then they can be made of plastic. Note to builders, if you build the welding is practically not needed, all parts and subassemblies are attached to each other by rivets or screws.

The driver's Seat must be attached to the front frame level height depends on the growth of the child. Almost ready velomobile need to complement the wheels, the wheel with the sound signal and the vertical shaft of the steering wheel.

The detailed manual will help you to easily make a recumbent with their hands, drawings, diagrams, there may not evenneed.

The benefits of homemade baby vehicles

The Main advantage of this homemade vehicle is the ease of disassembly. All you need to do is disconnect the steering gear from the top rear of the frame. You want to rotate it 45 degrees and pull out all the supports for the crossbar. To Assembly no problems, the distance between the wheels of the velomobile selected such that they do not interfere with each other in the folded position.

In addition to parents, it was easy to assemble the recumbent, the front and rear frame link so that the pin easily included in the support bearings. If you turn V-shaped frame relative to the pin, the latch moves to the leash of the steering mechanism, and a ready-made design can be put on wheels.

Assembled recumbent with their hands is quite compact and takes up little space, easy to store even in a small apartment. It has a light weight (12-15 kg), high throughput and simple operation.

The Diversity of modern children's goods many baffled. Homemade recumbent offers attractive and budget minded parents who care about the quality and safety of the rest of your baby. This article will help you to create a recumbent with their hands without any extra costs.