Pumping station: design and operation

The owners of country homes often raises the question of water supply. If the family consists of three people, and the house and small plot, and are only used in the summer, the water delivery is able to handle common household pump.

However, if you need to provide during the year seven liquid and for summer watering of plants, will require the creation of a water network. A great helper in this matter will become a household pump station. It will allow you to quickly and conveniently provide the house with water.

Any pump station is able to independently pump water from a source and deliver it in any point of water intake. In addition, the device may become a mediator, which increases the system pressure. If there is not enough capacity of the main pump (deep or superficial), then it can be through the hose connection of the station.

The Units have advantages over conventional surface or deep devices. First, the devices when a power failure capable of some time to work, and can generally be applied to diesel pumping station.

The Fixture is able to create the required pressure for the full supply of houses and land. It has a low weight and mounting can be performed in any place. The station operates with periodic shutdowns and inclusions, which reduces the wear of equipment.

Device Assembly is not the challenge for people who have little understanding of technology. The main component of the structure supports the surface pump, equipped with an ejector. This element allows to lift water from 10 meters depth, bringing her to the desired point. From the surface of the pump depends on the capacity of the entire station. The source leaves the suction line at the end of which is mesh and reverse the valve.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

The Pump is equipped with a steel pressure tank that has a closed structure and consists of separated membrane cavity. One of them is water and the other is pressurized air. The Pressure tank is designed to perform protection of the whole structure from hydraulic impact. It allows you to accumulate in one of the cavities of the water, which creates an opportunity for the rest of the pump. During a power failure the system continues to enter the water. Because of this property, a device called the accumulator.

In addition the pumping station for the water in your device have a pressure switch that produces off of the pump by reducing the pressure below the critical level and increasing to a predetermined value. Control all of the settings allows pressure gauge. All components are joined together using pipes and fittings.

When a direct connection of the pumping station must be installed on a level surface, the best on a concrete base. This is followed by the rigid connection of the unit with damper made of rubber. To connect the device to the water system can take polypropylene pipes.