Outdoor flooring. What is the flooring? Types, production and laying of parquet

Date:

2018-03-26 16:02:16

Views:

527

Rating:

1Like 0Dislike

Share:

Table of contents:

Quite often today in the repair of parquet is used. What is it about this you will be able to learn in detail from the article. This kind of flooring is a material that can be shield, boxed or stacked. About the features and variations will be discussed below. However, this information is not as important when there is a need to put properly of the die, counting the distance from wall to wall.

Principal flooring

parquet, what is

In the market you can find several varieties of flooring, including:

  • Natural;
  • Piece;
  • Solid wood.

Parquet is now the most common. He presented a set of strips with grooves and ridges for fixation. The material is made of solid wood, also the strap can consist of valuable hardwood and softwood. The material thickness in the range of 15-22 mm, while the length is 500 mm with regard to width, the parquet floors "Oak", for example, can be restricted to 75 mm.

Over many other types of eco-friendly material piece has a lot of advantages, namely:

  • Long life;
  • Can be mounted with the formation of different patterns, including art work;
  • Possibility of multiple repair.

So, you have decided to choose flooring. What is his styling and what types you should know. For example, solid wood also refers to the flooring and is its variety. From the above material it is size and the fact that not allows the installation of a set of drawings. Solid wood is more expensive and requires a larger amount of solid wood. Structurally, this Board allocate the ridge, a groove, a wear layer and the front side. The ridge serves to connect to the adjacent boards, and the groove is a notch on the end and side edges that includes a comb for fixing with neighboring elements.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

What else should I know about the floor

the restoration of the parquet

Top layer called the wear layer, and its lifetime determines the lifetime of parquet flooring. The more thick is the wear layer, the higher the number of polishing can be realized. If you are interested in parquet, what is the wear layer, you should know first.

And as the main distinctive features solid wood stand dimensions. Straps have a length of 500 mm, thickness on average is 32 mm, for this indicator the maximum deviation in both directions is 1 mm.

Production Technology

oak flooring

Flooring "Oak" may be the most reliable, natural and beautiful flooring if they follow the rules of production. Durability will depend on the quality of materials used and technological process. This floor covering is manufactured on the same process schema, but each manufacturer uses their recipes.

The First piece of wood sawn in the machine on a separate Board that allows you to obtain a certain thickness and width. Then the boards are sawn across, this allows you to form a workpiece of a certain length. At the same time discarded defective parts. Parquet flooring is made by milling from 4 sides, which allows to obtain the desired geometric form and shape of the base surface. To obtain a groove and the ridge Board is also milled. Then the elements are treated, while it does not clean the front surface.

Final phase

parquet price

On the milling machine at the ends of the hardwood strips are cut grooves and ridges, and after the boards are Packed. If we are talking about multi-layer Board technology is more complicated. Thus different species of wood glued together. As a rule, the low value of the breeds used to create the substrate, while are valuable for the formation of the surface layer. The proper selection of wood, the characteristics of production and the condition of the lacquer and the glue will depend on the durability, aesthetic appearance and reliability of the finishing material.

The parquet Laying: preparation

parquet

If you decide to use in the repair of the floor parquet, what is it Prim and proper styling, you should definitely know. However, for a successful outcome of the work is important not only that, but the awareness of the master on many other issues. The first step is to carry out the alignment of the rough surface. Its quality will directly affect the lifespan of the flooring.

If the base will have defects of the parquet can be covered with cracks, ridges and breaks, and the floor will squeak. This will lead to the necessity of additional grinding that will istonic working material. In order to avoid such consequences, the light wood flooring need to be laid on a properly leveled surface. For this you can use the method in which the floor is poured screed. Elevation changes in the range of 2 cm can be removed by grinding the concrete floor. Later, on this surface you can pour a cement-sand screed or leveling the polymer mortar.

Cement-sandscreed before laying the floor you must leave for 4 weeks. If you plan to glue the boards to the primed screed, then pour it to the mixture of cement grade M-150. You can apply brand M-300. These formulations will be of high compressive strength, and the glue should be used elastic. If the surface you intend to lay water-resistant plywood, then wait for the complete curing is not necessary. It will be enough for 28 days.

Guidelines for installation of parquet

parquet floor

The Flooring, the price of which can vary depending on the quality of wood and the manufacturer can be placed, for example, a herringbone or mosaic modules. If you decide to resort to the corner piling, to start work it is necessary from the Central row. At the center of the room from wall to wall the master should pull the cord on which you will be guided. Later in the course are two hardwood strips which are joined together by the Christmas tree. The tongue and groove and the ends apply glue. The part need to process the base from plywood, to begin it should from the far wall. Use recommended notched trowel.

Strap priravnivaetsya to the surface so that the excess glue came out. If you use additional mechanical fastening in the form of screws or nails, they must be screwed into the groove at an angle of 45°. After the surface has been missed by the width of the strap, you can attach it by inserting an end and the longitudinal grooves of the preceding element. Seal connecting plate with a rubber mallet.

Parquet can be laid on the following technology. First mounted charges by type of lighthouse Christmas trees, right and left. After is the number to the left of the tree, and then – to the right. According to this principle it is necessary to act, gradually expanding the area of styling. Near the walls the place you should fill trimmed straps, setting wedges to fill the gap at 3 mm.

Floor Restoration

parquet manufacture

If you need to restore the badly trampled, neglected and worn flooring, the surface of which are undulating hollows and cracks, it is possible to do without replacement coverage but in this case, restoration is best left to professionals. The restoration of the parquet might be needed and in that case, if he is swollen after flooding. This floor experts advise to replaced, and after drying in the case you can go even older piece, but the whole complex of scraping and painting works need to have.

If the dice were dark, and the wood was loose, will need a complete replacement of the flooring. It is necessary to dry the room and prepare the underlying surface. Sometimes it can save the usual cosmetic filler. To do this, you should purchase a restoration paste of the appropriate color. However, to prepare the mixture you can own, if you have some old parketin. To do this, they cut, and the chips add to the parquet varnish, until you get the consistency of sour cream. To the lacquer, you can add sawdust filler in the ratio of 4 to 1.

The restoration of the parquet can be done using technology, hand sanding, you have to buy the eponymous tool. Cycle you can make yourself, using a plane and a piece of metal. In the end, you should receive something like a machine or hand sanding.

Cost

The Production of parquet in different companies may differ. Sometimes this affects the cost. While the average price of modern flooring is 800 RUB. per square meter. This material can be made of oak wood. The slats in this case will be of size 8 x 22, 8 x 160 mm Parquet, the price of which you already know, some time after the operation may require repairs. The most common work-sanding, per 1 square meter which you will have to pay 350 rubles If the work will be carried out at the rate of “Euro”, then for 1 square meter price will be 650 rubles.

Conclusion

More recently, the parquet was then referred to the coverage of natural wood, but the development of technology and appreciation of natural materials influenced by the fact that the flooring and parquet are made a little differently than before.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/20152-padlogavy-parket-shto-takoe-parket-v-dy-vytvorchasc-kladka-parketa.html

DE: https://tostpost.com/de/gem-tlichkeit/20165-im-freien-parkett-was-ist-parkett-arten-herstellung-und-verlegung-von-.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/20183-al-aire-libre-de-parquet-qu-es-el-parquet-tipos-fabricaci-n-y-colocaci.html

KK: https://tostpost.com/kk/domashniy-uyut/20148-eden-parket-m-nday-parket-t-rler-nd-ru-zh-ne-t-seu-parket.html

PL: https://tostpost.com/pl/komfort-domu/20120-pod-ogowy-parkiet-co-to-jest-parkiet-rodzaje-produkcja-i-uk-adanie-par.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/20122-exterior-do-piso-de-madeira-o-que-o-piso-de-madeira-tipos-de-produ-o-e.html

TR: https://tostpost.com/tr/domashniy-uyut/20154-d-mekan-parke-nedir-parke-t-rleri-retim-ve-d-eme-zemin.html

UK: https://tostpost.com/uk/domashn-y-zatishok/20140-parket-scho-take-parket-vidi-virobnictvo-ukladannya-parketu.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Calcium silicate adhesive: features of the application

Calcium silicate adhesive: features of the application

Silicate clay used in various fields. Without it difficult to do in construction, the material will be useful to perform the waterproofing. In addition, it is used in the production process, acid resistant, heat resistant and wate...

Chinese garlic: planting and care

Chinese garlic: planting and care

Even at the very small area you can find at least one bed with garlic. This vegetable is loved by all vacationers. Without the garlic it is impossible to imagine almost any one dish. There is a huge amount of raznovidnosti, but to...

Interior style living room: Japanese and Scandinavian

Interior style living room: Japanese and Scandinavian

Lounge – “main” room in any home. Its interior has received increased attention, because there are friends, colleagues, partners, organizing parties and dinners. In the living room design has its own trends and c...

Pylons and their installation

Pylons and their installation

distribution Infrastructure of power grids over long distances, as a rule, provides for the organization of air networks. As the contours of the selected delivery lines (PTL), for operation which use special supports. This constru...

Pumping station: design and operation

Pumping station: design and operation

the owners of country homes often raises the question of water supply. If the family consists of three people, and the house and small plot, and are only used in the summer, the water delivery is able to handle common household pu...

Foam generator for cleaning: description and advantages

Foam generator for cleaning: description and advantages

the Foamer wash – it is an integral part of any motor of high pressure. It has the appearance of the tank under high pressure dissolves detergent foaming agent. As a result of clicking on propstoset, the pressure is reduced ...