Paint latex. The application technique. Tips for choosing

In the modern construction market offers a wide plethora of colors. Water soluble now the most sought-after coverage. Latex paint is a separate category of abrasion-resistant dispersion of enamels and water-based. After application it forms a silky Matt surface with a slight gloss. The degree indicated on the label or contained in the name of the paint. The popularity of coatings of this type due to their consumer properties.

Latex: customer reviews

Those who have already used water-soluble enamel, flatteringly about their quality. The advantages of these coatings speak for themselves:

- environmentally friendly-free of harmful impurities;

- the possibility of applying a thin layer that emphasizes the structural relief Wallpaper;

- resistance to wet cleaning, dry abrasion – no traces when touching;

- affordable price

- convenient packaging (1-4 kg in capacity);

- versatility (suitable for walls of all materials, Wallpaper, ceilings, wood siding);

disguise small defects;

- easy application in comparison with traditional whitewash;

- vapour permeability and porosity, so the latex paint has been successfully used to cover the ceiling in the bathroom. It perfectly absorbs the vapor as the paint, but also dries quickly;

if necessary you can wash off;

- quick drying, no odour resistant;

- no stains, streaks and traces of the brush.

Application Rules

Latex Paint will last long on the walls, enjoy its silky Matt color only if the following technique:

1. Surface preparation: cleaning from dust and dirt, grease, strengthening acrylic impregnation and primer. Smooth concrete, brick, plastered walls, Wallpaper can not be primed. The prepared substrate should be clean and dry.

2. For drawing on the Wallpaper is better to use a spray gun or soft cushion.

3. Dyeing to produce several layers (2-3).

4. Water consumption is 1 liter per 9 sq. m. for the first layer, for later less. The procedure of dilution necessary to accurately study the manuals. The first layer is diluted with plenty of water to latex is better bonded with the painted surface.

5. The second layer is applied on the dry basis, not earlier than the expiration of two days after the first coverage. Enamel dries at 20 ° C for about 6 hours, but the load is able to keep only 72 hours later.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Buyers Tips

in applications that require constant wet cleaning, use enamel with higher gloss levels;

to the latex paint has not lost its properties, it should be properly stored – at positive temperature and not more than year;

- advance purchase is the right color because the enamel is in white color. The desired hue is achieved by tinting.

Latex paints are increasingly used in the repair of residential premises, offices, hospitals, children's institutions. Unlike analog, they maintain a healthy environment, as environmentally safe. In terms of price and quality benefit from the acquisition of paint for the buyer is obvious. It is a modern coating – opportunities for creativity of the designer.