How to make heat with their hands

In modern conditions, the acquisition of own device for the production and heat supply costs to customers in a large enough amount. To save money, or in the absence of the opportunity to acquire the heat source, the store has reasonable grounds to construct a heat generator with their hands. There are several varieties of podobryaev. The choice depends on the technical capacity of the owner or tasks that need to be addressed with the help of the heat generating system.

Advantages of heat-shrinkable homemade

In General there are two types of devices: static and rotary. If in the first embodiment, the construction is equipped with a nozzle, the other to create cavitation using the rotor. These vortex structures can be compared and to choose the appropriate option for the Assembly.

The Heat source, with his own hands constructed, will help provide a comfortable temperature is a country house, cottage, private cottage, apartment – in the absence of Central heating, defects, disruptions or disasters. Also, these devices help to offset the cost of heat, to choose the optimal energy supply option. They are simple in constructional terms and is economical, environmentally safe.

How to make heat with your hands?

For Assembly you will need the following materials and tools:

- a sufficient number of tubes corresponding to the room length and width;
- the drill (drill) for drilling pipes;
pump;
- the cavitator any kind;
- gauge;
- thermometer for measuring the level of heat and the sleeve for him.
- valves for heating systems;
- engine to electric based.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

For systems of different types may require additional components. But in General, homemade heating devices readily available for the design and configuration of all comers.

Cavitation

Cavitation heat generator with their hands can be done on the basis of the centrifugal pump, which often have in a bath, well the water supply system of a cottage. The low efficiency of this pump can be converted into energy of a cavitation heater. There will be a transition of mechanical energy into heat. This principle is often used in the industry.

Cavitation heat generator with their hands is made on the basis of the pump delivery pressure over the nozzle. The lack kavitatsionnogo of the device – the high level of noise, big capacity, inappropriate in small spaces, rare materials, dimensions – even a miniature model is a 1.5 square meter.

Heated on the wood

Heat with wood, are made ensure a stable heating in the absence of Central heating and the sufficient amount of wood fuel. No matter how evolved technology and construction methods, wood stove, fireplace save when shortages of heating.

For heating on the wood carried out the installation of a fireplace or traditional stove. But such systems require careful adherence to safety standards. It is important to determine the place of installation of the furnace – massive aggregates is not always possible to place in the cottages.

To Make the heat on the wood with your own hands – this is a good solution, if necessary, auxiliary heating of the rooms. Sometimes it really is the only possible way of heating.

Device Potapova

The Heat Potapova your hands can be done using the following:

grinding machine for angles;
- welding device;
- drill and drill bits;
- ring spanners in 12 and 13;
- assorted bolts, nuts, washers;
- metal corners;
- paint and primer.

The Heat Potapova made, allows you to generate heat based on electric motor using a pump. This is a very economical option to produce which is simply out of the ordinary details.
the Engine is selected depending on the existing voltage-220 V or 380 V Him start assembling, fixing on the frame. Runs the metal frame of a square, welding and bolts, nuts help to fix the entire structure. Making holes for bolts placed inside the engine, the frame is covered with paint. Then select the centrifugal pump, which will spin up the engine. The pump is mounted on the frame, but in this case, you need coupling with a lathe, which can be ordered at the factory. It is important to insulate the generator special casing of metal sheets or aluminum.

Generator Frenette

Heat Frenette their hands make many fans of technical experiments – this unit is known for incredibly high efficiency and great variety of models. However, many of these heat pumps are quite expensive.

Heat Frenette their hands can be made from the following components:
- rotor
stator.
- blade fan;
- shaft and.
the Stator and rotor act as cylinders, one inside the other. At big is filled with oil, the small cylinder due to its speed heats the entire system. The fan provides a flow ofhot air. This is a fairly simple heat pump model that is amenable to improvement. In the future, you can replace the inner cylinder with discs of steel or to remove the fan.
High level of efficiency ensured by circulation of a heat carrier (oil) in a closed system. No heat exchanger, but heating power is high enough. This system saves the costs that typically need to allocate to other types of heating.

Generator magnet

Magnetic heating system belong to the vortex type and work on the basis of the induction heater. In operation, an electromagnetic field is formed, whose energy of the heated objects absorb and convert into heat. The basis of this unit is induction coil – multiturn cylindrical, the passage through which the electric current creates a magnetic field variable status.

Magnetic heat generator with their hands doing of the elements: the nozzle and downstream pressure gauge, thermometer with thermowell, valves and induction elements. If you place the object to be heated in close proximity to this unit, the generated magnetic flux would penetrate the object to be heated. The lines of electric field are perpendicular to the direction of the magnetic particles and go in a vicious circle. In the process of diverging vortex flow of electricity energy transformirovalsya in heat – there is a heating of the object.

Magnetic heat source, with his own hands made (with inverter) allows you to use the power of magnetic fields to run the pump to warm up the room and any substances to high temperatures. These heaters can not only heat water to the desired temperature, but to melt the metals.

Diesel Generator

Diesel heat, their hands assembled, will effectively solve the problem of heating in an indirect way. The entire combustion process in these units is fully automated, diesel-powered device can be used in painting chambers and industrial needs.
the Main fuel in this case – diesel or kerosene. The device is a cannon that is formed from the housing (casing), fuel tank and attached pump, and clean filter and combustion chamber. The fuel tank is placed at the bottom of the unit for ease of supply of the resource.

Diesel heat generator, are made, to help effectively and efficiently heat the room quite economical way. Also, the fuel may be diesel fuel. Diesel units have the injector that atomizes the fuel as it is burning, but in some embodiments, the flow can be made by the drip method. In calculating the continuous operation to fill the generator is required twice during the day.

The design

The Heat source, with his own hands manufactured, will work most effectively if you conduct a preliminary test of the entire system and to correct possible defects:
- all surfaces must be protected by paint;
- the enclosure must be of thick material due to the very aggressive cavitation processes;
- the inlet openings must be of different sizes – so you can adjust performance;
- dampeners need to be changed regularly.
Better to have a dedicated laboratory area, where you will pass the test generators. A the best option – in which the water is heated stronger for the same periods of time, this device may be preferable in the future to improve it.

Owners

To date, a large number of home owners have already completed the development of its own units. If you do heat with their hands, according to most craftsmen, you can actually obtain an economical option for heating. Do these units literally from scrap materials that allows everyone to acquire their own source of heat. Some models require factory parts that can be made to order in an industrial environment.