The connector for the hose, its type and size

Connector for hose – quick connection for easy operation irrigation equipment, irrigation area or when used in a portable car washes. Feature of the present connectors is that they withstand the high pressure in the pipe without additional waterproofing. Such elements are easy to install, they are easy to use.

Varieties of connectors for hose

All probes have a common feature-the presence of an exit on the nipple connecting it to the adapter on the faucet, sprinkler or gun irrigation.

The connector for the hose can be made of plastic or metal alloy. The composition of the material saveset of the operating pressure in the pipe. Plastic compounds in the medium price segment is kept for about 10-15 bar. Metal and brass products are designed to work in conditions of pressure in the pipe above 15-20 bar.

Often the term "connector" refers to a coupler, which connects two garden hose equal or different diameters. In this case, note that the clutch is really designed for connecting two hoses, but to then disconnect, you will need to Unscrew the cap and pull the tube.

Connecting nozzle threaded is designed for use with other similar design elements. Depending on the details of the ligaments, may need external or internal thread of a certain diameter. These compounds also connect to the nipple and are able to get.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

What is?

The Classic connector for the hose consists of the following elements:

• The carrier tube with the body. Directly in which is inserted the garden hose. After tightening the cap it tightly and hermetically mounted inside the connector.
• Tselkovyi mechanism. It provides the possibility of removal of the device in one motion.
• Screw-down cap. With the help of it the hose is secured in the connector. Has an internal thread which is screwed onto the holder tube. As a result, the design is fixed, is provided by the compression.
• Stop-valve. Installs connectors, with automatic closure. Is a plastic or metal piston with providing hermiticity rubber bands. The essence of his work lies in the fact that when the connector is connected to the nipple, the latter presses the piston. In the United state, the valve is always open and after disconnection of the pressure in the pipe closes it. This allows you to stop the water flow without turning off the tap.
• Elastic Bands for sealing. They are inside a fast connection and don't allow water to go through the thread.

Standard dimensions

All connectors are designed for hoses standard diameter and are produced according to certain parameters. Universal adapters can join pipes of different diameters, but the domestic market, these compounds are extremely rare.

• Connector for 3/4" hose. With the help of a quick connect flexible pipes with a diameter of 3/4 inch or 19 mm.
• The Device is 1 inch diameter hose designed for 25-26 mm in cross section.
• Connector for hose of 1/2". It is used for pipes with a diameter of 12-13 mm.
• More rare models 1/4, 3/8 and 5/8 inch are designed for connecting the relevant size hose.

Scope

A Connector for a hose is used wherever there is a need to use water supplied from a hose.

The Most widespread use of quick couplings for irrigation of gardens, lawns and flower beds, connecting it to the car wash.

When choosing the material and size of the adapter, consider the following factors:

1. Working pressure in the pipe.
2. The diameter of the flexible tube and the size of the nipple.
3. Weather conditions at the time of use.
4. The Possibility of mechanical damage of valves for irrigation.

Other watering valves

A Connector for a garden hose is just one of the elements of fittings for irrigation. For its successful operation requires other parts.

• The Nipple. Is a cone connecting the two connectors. At its ends are elastic bands that provide tightness of connection. This element can be of two types: STANDARD and POWER JET. Depending on the level selected fast connection. Two elements of such reinforcement cannot be held together by parts of different sizes.
• Tee. Is analogous to the valve. The difference lies in the fact that he has three connections to the connector.
• Clutch. Connect two flexible tubes. If the element reduction, with its help you can connect hoses of different diameter.
• Adapter on the faucet. This device is designed to connect a hose to the water supply. Depending on the thread of the tap it may have external or internal cuts. On the other end is a nipple connector.
• Guns and sprinklers. There are a huge number of sprinklers of various modifications. At the end of them is a nipple connector suitable for connector.

All items wateringfittings necessary to ensure comfort. A variety of sizes and shapes allows to choose the elements that provide quality irrigation in each specific situation.