Mesh plastering: types, use

Construction work can be varied. There are actions that are applied continuously – the plaster walls. To achieve a good result, apply additional components. Plaster grid – is the ability to make the applied layer is solid and, therefore, this finish will last longer.

This product is often used in construction and decoration. Before buying everyone should be aware of how to use this building material and it is better. Reinforcing mesh is used to create strong surfaces, in pouring the Foundation and reinforcement of floor slabs. Thus, it is used in many ways. Not do without it.

Types

Not long ago a leader in helping plastering the surface were wooden shingles. But time is changing, and today, the market of building materials of sentences missing. This plaster mesh is used in the finishing. It is made of different materials, each with its own operating characteristics, that builds a choice.

The Mesh for plastering, plastic has another name – masonry. In the composition are polymers, but with high strength. The range of large grid - with a variety of cells and thickness. These products are used in all areas of construction. What are the pros and cons are present in this grid? Consider the below.

Pros

Plastic is used in many areas of construction. It is durable and inexpensive. It is worth noting the following advantages:

• The Product does not react to moisture.
• Quality finishes enhanced by the fact that the grid is not affected by corrosion and decay. Used in interior and exterior decoration.
• Withstands different temperatures depending on time of year.
• The material is free of toxins.
• Mesh is resistant to mechanical impact.
• For fastening screws are used, screws or the product just goes into the solution.
• An Inexpensive cost in relation to the other.

These positive aspects make plaster mesh, plastic sales leader.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Cons

In Addition to the advantages, there are minor drawbacks:

• Plaster layer must not exceed eight millimeters, otherwise the whole thing loses its reliability.
• Some plastic can not stand exposure to alkaline solution.
• Not everyone thinks reinforcement this reliable.

But in what direction is this design? Plastering walls – this is one of the applications. To align the walls on the street or inside the building, this type of mesh are suitable. What types of are on sale? A strip of plastic found in the interior finishing of plasterboard joints. Serves to increase the adhesion in the process of insulating walls foam plates. Without net work quality will be low.

To Cope with the covering plaster walls with expanded polystyrene insulation will not work efficiently without the use of a reinforcing component. After a certain time will disappear the whole layer. In such works there is a grid with high rigidity and large thickness. The application of sand-cement compositions will occur reliably and efficiently.

The Range of application of such finishes is great. Often it is found in the process of laying a Foundation for unstable soils, is fixed between the layers. Most popular are considered mainly cells with four to five millimeters. Rarely outside the use of a larger product.

Fiberglass mesh

This option is no less good than plastic material. The main advantage is the chemical resistance. High strength allows you to withstand the severe mechanical and physical impact. Basically the mesh plastering glass cloth 5x5 mm. But what is the difference and benefits?

Sizes, density

It is clear that the characteristics of this material better than any other. Choice is built depending on the density of the surface, according to this indicator addressed the reliability. The masters say that this value in grams per square meter. And when the result is large, and the strength increases. In selling there are three types:

• Used in the interior decoration. Density of 50 to 160 grams per square meter. In the sale of two types – painting and plastering mesh. The first is more simplified and with small cells. Fiberglass plaster mesh is used with cell 5 x 5 millimeters or more. It has a high density.
• For the facade. Plaster mesh has a density of 160 to 220 grams per square meter. For outdoor use, the dimensions of its cell reach to ten millimeters.
• Finish the underground parts of the building. This species has a maximum density of up to 300 grams per square meter. Such mesh can withstand high loads and extreme conditions. The cost of the grid is high, because the material required for the manufacture of a lot.

Marking

According to this indicator, on the packaging it becomes clear what the hardness and where to apply the product. There aredesignations:

• With   grid.
• SS – fiberglass mesh.
• N-for outdoor use.
• – interior decoration.
• W-putty grid.
• A – vandal-proof, high strength.
• Do – gain.

In Addition, the package has other useful information. This is the maximum tensile strength level. In the manufacturing process for each mesh apply their additional components. They allow to increase the reliability of the product. Often such material is sold by the meter, which is handy for finishing work. With a shortage of easy to buy the required amount.

The Use of glass fiber mesh is:

• The reliability of the decorative layer.
• The opportunity to increase the level of adhesion of finishing material to the surface of the structure.
• Significant improvement in the execution of complex operations.

Note

It Is understood that each surface of the plaster will stay different, regardless of whether the grid is present or not. When you buy should pay attention to the manufacturer. Questionable material will not be reliable and perform its functions. Only certified product will become a reliable assistant in the construction industry.

Metal

Mesh metal plaster - common in construction. Because it helps to strengthen not only finish, but also supporting structures. Mainly found in exterior trim. Helps to create a durable construction, effective in decorating. Working with her on the concrete, brick and aerated concrete constructions.

Subtypes

In the construction a mesh of any thickness and with any cell size. To plaster surface, use the following metal supplements:

• Fabric metal mesh. That particular name came from the fact that the netting-like fabric. Coverage - plain and twill, with various cells. Used in the production of wire, or galvanized steel. In sale there are different sizes of cells and their diameter. Depending on the executed works, choose the best.
• Mesh-netting. Popular variety and in demand in the construction market. Plaster mesh got its name from the manufacturer. It is created from high-quality steel wire with an additional polymer coating. It is durable, because it is not amenable to the corrosive action. But it is used for fencing and has a color palette. Made it, twisting metal components by bonding. It is capable of holding a large amount of plaster. When choosing pay attention to the wire diameter and the cell size.
  
• Welded wire mesh. Wire is laid and is connected with a welding seam. To create a used wire or rebar. The diameter and size of the cell is different. Relevant this grid in the process of reinforcing the Foundation, laying the insulating material. The case with a polymer coating. Also produce welded galvanized mesh stucco. It is sold by the meter. The product is used in finishing not only with cement-sand compositions, but also on wooden surfaces as shingles. Restrictions on application no.
• Masonry grid. Used to connect weld. Diameter of big that changes the main characteristics and scope. Suitable for plastering walls, although it is realistic to use in the construction of walls and strengthening of the sexual ties. It is implemented by the meter. The choice is made on the cell size and the diameter of an applied wire.
• Metal plaster mesh. The title is clear, in any repair work it is applied. Created from heat-treated galvanized wire. Such a grid allows you to evenly distribute the plaster mix. After these works, the wall becomes smooth and the coating lasts for quite a long time.

When you select should pay attention to many things. First – the cost. It has a big run-up, so you should pay attention to:

• Used metal for manufacturing. If the manufacturer chooses durable steel, the costs increase, respectively, the selling price increases. Better to check grades.
• Quality. It is a galvanizing presence, or lack thereof. When the release is engaged in a large enterprise, it costs less as much.
• Connection Method. Better would be the use of welding, than of ordinary lay.

Having the right information, every one of the assortment you will find a suitable mesh for construction works.