Garden bench wood with his hands: drawings. Garden benches with their hands out of metal and wood

Date:

2018-03-29 03:18:14

Views:

579

Rating:

1Like 0Dislike

Share:

Table of contents:

Garden bench made of wood, with his own hands made, can be an excellent addition to the exterior of a suburban area. It will be aesthetic and comfortable to use. Some acquire such furniture in the appropriate shops, but if you decide to do this, you will understand that to choose the bench size and design very difficult. For this reason, it is recommended to produce a similar design on their own. The following manual will be useful as the private home of the masters and the professionals.

Preparation of a core set of materials and tools

garden bench wood with their hands

Garden bench from wood with your own hands can be done only after the master will be able to prepare the following materials and tools, without which work is impossible. Thus, you will need to prepare:

  • Screwdriver;
  • Drill
  • Circular saw which can replace of the manual;
  • Centering the drill bit;
  • A chisel;
  • Sanding machinko;
  • Molotok;
  • Carandas;
  • Ugolnik;
  • Uroven;
  • Ruletka.

It will be Impossible to provide a solid mount, if you do not use in the course of work glue designed for working with wood. Will need primer. Bench after manufacture can be painted, which should use the appropriate composition, which not only ennoble the appearance of wood, but will make it more resistant to external manifestations. Don't forget that the useful and putty. But in order to make the pores closed, you must purchase a composition, which contributes to this.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Garden bench from wood with your own hands should be treated with sandpaper, you must use one that has a grain size equal to 120. For mounting, use screws with a length that is equal to 5 and 6.3 cm

Preparation of material for construction

how to make a garden bench from wood with your own hands

You will Need to prepare four bars, the dimensions of which are equal 5x10x244 see as well As a couple of bars with dimensions equal to 2 5x10x244 see Another beam should have a size equal to 2,5x5x244 see After you will be able to prepare these elements of them can be cut smaller, the dimensions of which will be presented below. To do this, use a circular saw, but to cope with the job and hand saw, but the process will be somewhat longer.

Cutting out parts of the shop

garden bench out of wood DIY blueprints

Garden bench made of wood (with their hands to produce it quite possible)will have four legs, the size of each of which is equal to 5x10x42 see will Need wooden strip in the amount of two pieces. The size of each is 2,5х10х5,7 see the edge of the frame should also be made in two copies, each size 2,5x10x15 see Struts too, should be two (5х4х30 cm). The sides of the frame (2 pieces) should have the following settings: 2,see Also 5x4x155 will require the same amount of internal partitions frame sizes each in the range of 2,5x4x24 see But the supports need to cut five pieces, their sizes are equal to 2,5x5x24 see Boards which will form the basis of the seat design, should be four, and their sizes are equal 5x10x165 see At the end you can still cut and the regional Board in the amount of two pieces, the size must be equal to 2,5x10x35.

Recommendations for production

garden bench with their hands out of wood

Before you make a garden bench from wood with your own hands, you need to think about will it be used in tandem with any table. This is important for the reason that the bench should be in harmony with the rest of the furniture in the garden. Order shop looked in the General exterior, the surface after the production can be painted in the color of the rest of the furniture in the garden. After the wizard has cut out all elements, among which are the legs; the seat; the beams under the frame, etc., you need to make the work for cleaning the surface of all of the elements to spare them from the roughness and chips to use when you need sandpaper.

The Technology of Assembly benches

garden bench made of solid wood with your own hands diagram drawing

If you are thinking about how to make a garden bench from wood with his own hands, the first step is to do legs. In the process, the wizard should try to take care of the stability of the structure. For this purpose it is provided with spacers. Using a chisel, you need to make in the bars, which are intended for the manufacture of feet, seizures. In tandem with the chisel, use a hammer. Each leg is composed of two bars, which are strengthened between a glue designed for working with wood. In addition, for a more permanent connection it is necessary to use mechanical fasteners-screws. Dredging must be done such that their depth was equal to the thickness of the bar legs. The next step is to begin to mount gaskets mounted on the inner surface of the legs. Apply with the necessary screws, the length of which is equal to 5, see Further details attachedon the adhesive composition.

Fixation plates to the strips

garden benches and benches made of wood with their hands

When you made a garden bench from wood with your own hands, drawings which are presented below, in the next step, you can begin to mount the spacer plates. Also should be used to mount mechanical type and glue. Length of the used screws should be equal to 5 cm

Work on the struts and frame

You can Now consolidate between the legs, using the spacers. To use it should the same screws and glue. You can then engage in the installation frame. A pair of 155-cm bars and a pair of 24-inch boards should be strengthened with screws and glue. However, it definitely should use a square to ensure the proper positioning of elements relative to each other, as for bars. The spacer pieces should be installed, and then fixed with screws and glue to the bottom edge of the main frame, this will allow to ensure the stability of the frame.

Fixing legs and plank seat

Making garden benches and benches made of wood with your own hands, at the next stage you can start fixing the frame to the legs. It is now necessary to use screws with a length equal to 6.3 cm Mount additionally and glue. Install mechanical fasteners need very carefully, this will avoid the possibility of damage to block, the body of which can simply be cleaved.

garden benches with their hands metal and wood

In order to be able to correctly install the boards for the seat, you need to initially determine the centre of the supports, and then attach them. If you make blind holes, the seat construction can be installed separately, after taking up the mount to the frame. When garden bench is made of solid wood with your own hands, schematic drawing of which is presented in the article, you need to make the grooves between the boards is minimal, to ensure that boards were close to each other.

Work on regional boards and finish

Only now you can do the regional boards. They need to be screwed with screws to the legs of the structure. However, blind holes, you will have the opportunity to strengthen the regional Board at a distance of 6 cm from those which underlie the seat.

Garden bench with their hands out of solid wood should be in conclusion, high quality finished to protect the surface from the negative effects of the environment. Initially, the product will get rid of burrs, must not be on the elements and chips, for which the design should be well polished with sandpaper. Holes that remained after the installation of the mechanical fasteners, it is necessary to fill spackling compound. After the wood to be treated with a pore-filling composition. This will not only protect from moisture but also from drying, the latter of which may cause violations of the original dimensions of the bench. For a qualitative overlay of paint the wood is pre-treated primer composition. After it dries, you can start working on applying the paint. In this state, the bench should be left to the time required for the drying of the paint shop only after you can start to use.

Of Course, a great option is a combination of wood and metal. Garden benches with their hands out of metal and wood is not only aesthetically pleasing, but also durable, but in order to make the shop out of steel, you must have skills in using welding machine.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/23223-sadovaya-la-ka-z-dreva-sva-m-rukam-charcyazhy-sadovyya-la-k-sva-m-ruka.html

DE: https://tostpost.com/de/gem-tlichkeit/23229-gartenbank-aus-holz-mit-ihren-h-nden-die-zeichnungen-gartenb-nke-ihre-.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/23254-muebles-de-banco-de-madera-con-sus-propias-manos-los-dibujos-de-jard-n.html

KK: https://tostpost.com/kk/domashniy-uyut/23218-sadovaya-skameyka-a-ashtan-z-oldarymen-syzbalar-ba-oryndy-tary-z-olyme.html

PL: https://tostpost.com/pl/komfort-domu/23176-awka-ogrodowa-wykonana-z-drewna-w-asnymi-r-kami-rysunki-awki-ogrodowe-.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/23174-um-banco-de-madeira-com-as-m-os-os-desenhos-um-jardim-com-bancos-de-su.html

TR: https://tostpost.com/tr/domashniy-uyut/23226-bah-e-tezgah-ah-ap-elleriyle-izimler-bah-e-banklar-kendi-elleriyle-met.html

UK: https://tostpost.com/uk/domashn-y-zatishok/23202-sadova-lavka-z-dereva-svo-mi-rukami-kreslennya-sadov-lavki-svo-mi-ruka.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Foam for insulation. Specifications, dimensions, price

Foam for insulation. Specifications, dimensions, price

Gas-filled plastic, which is apparently the material of foamed cells belong to the class of foams. Depending on production technology and the polymer, this class includes several kinds of materials which have different application...

Stairs in the interior of a private house: design, style, and reviews

Stairs in the interior of a private house: design, style, and reviews

single Storey house has long not cause delight. Meanwhile, multi-storey building allows for limited space to create something more impressive and comfortable. The staircase in the interior of the house – the opportunity to p...

Mastic polymer bitumen: features advanced materials

Mastic polymer bitumen: features advanced materials

the Bitumen-derived product obtained by refining oil. An indispensable material in many areas, but most often used for waterproofing of building objects, for the laying and repair of roads. Compare it in importance is possible wit...

Heating boiler for solid fuels: what is it?

Heating boiler for solid fuels: what is it?

heating Boiler for solid fuels is becoming a very useful device in the case where there is no possibility of connecting to the gas line. Such devices work with wood, briquettes or coal. The fuel put into the boiler, is gradually c...

Manifold heating: how to make the house warmer

Manifold heating: how to make the house warmer

the Manifold heating is the most important device used in any boiler or heating system. The main function of the fixture is the distribution of coolant flows.the Device increases the efficiency of the heating system. The main purp...

How is motoliberty their hands: instructions for making

How is motoliberty their hands: instructions for making

of Course, work even on small plots can be very exhausting for a man, not only physically but also mentally. Really, to wield a shovel every day from morning to evening – not the most interesting case. But what if in the win...