The motorbike with his hands. Motor for bike

Bike & ndash; a vehicle that allows simultaneously to reach the desired point, take care of his physical form and turn every trip into a walk. It does not need to stand in traffic or crowd in a Packed subway car, returning home from work. It is environmentally safe. But he has the disadvantage that long distance can not overcome everything. Still, the physical form may not be allowed to drive a few miles without stopping. But the solution can always be found. In this case, it is possible to make the motorbike with his hands.

Features

Motorbikes can be purchased in the store. But they are quite expensive and far from the desired. Yes and this design weighs about 20 kg. weight will greatly complicate the road, if the engine will be damaged and will have to pedal. Such shortcomings can be avoided if you make a motorbike with his hands.

This form of transport has been widely popular among teenagers in the Soviet Union. But the modern features and tools significantly change the usual bike and to create an original vehicle. Experienced DIY to the question about how to make a motorbike with their hands, will answer that it is very simple. To cope with this lesson, you will be able to almost everyone.

Engine Types

To get started, you need to decide what is better to choose a motor to bike. They are of two types:

• Electric, which with the advent of compact, but capacious batteries are becoming more popular.

• Internal combustion Engines, which are the traditional option.

To create a makeshift motorbikes petrol engines can be used from lawnmowers, chainsaws and other tools and assemblies.

Selection engine

Most Often the basis for making motorbike with their hands take an old chainsaw. Or rather, its engine. But there are some limitations. You should not take the engines from a small and light drinking. They possess too little power. Suitable for bike motor, whose power - above 2 HP (1.5 kW). And the higher the value, the better. But when the value of the bike will be able to accelerate up to 30-35 km/h.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

When selecting the engine also should pay attention to the volume. In accordance with the Vienna Convention, the value of this should not exceed 50 "cubes". Only in this case will not need the license and registration of vehicle. The motorbike will fall in the category of "mopeds".

Another advantage of this type of engine-no smell of gasoline. The engine is practically “smells” that allows you to keep the bike at home. But there is a disadvantage. It is the characteristic sound of a running chainsaw. The sound of the motor will accompany throughout the trip.

Connection of separate parts with a frame

To create a motorbike you can use any bike: old, rusty, folding. Motorbike requires only the foundations of a solid frame. If one is not available, you can make yourself. This will need a few pieces of metal pipe.

Attaches the motor to the frame at the junction of bottom and seat tube. This is the most optimal but not the only option. You can sometimes see attached to the trunk motor. Importantly, the mount was reliable. While working you will feel vibration, by which the motor may fall if not properly attached. For mounting recommend the use of metal clamps. Kit for motorbike can include special perforated attachment. But their use is not necessary.

Besides the engine to the frame it is necessary to fix the battery and fuel container.

Connection details

Secure all items individually on the frame of the bike – this is only half the job. Next you need all the elements to combine in a single system. Otherwise a homemade motorbike will lose all of its new possibilities.

The First thing you need to connect the motor to transmit the rotation of the wheel. For this to be a special mechanism. There are two versions of these mechanisms: pulleys or chains.

Belt drive provides for a system of pulleys. This is an easier option. One pulley mounted on the motor shaft. The second sleeve is fixed to the rear wheel. Between them is put on the tension belt. The downside of this option is a shorter life of the belt (which stretches faster) in comparison with a chain. It is worth noting that V-belts according to their characteristics (service life) is not inferior to the chains.

In the case of chain transmission, the rotation from the engine to the wheel goes through the chain. On the one hand it is mounted on a sprocket of a back sprocket. On the other – a gear mounted on the motor shaft. Chain drive is more durable than a belt. But sherequires regular care.

The battery is connected to the ignition of the motor and brake lever. You can then install exhaust pipe. You can do without it, but the exhaust gases will overshadow the trip.

Installation of electric motor

Using the petrol engine when creating a motorbike with their hands "killing in the Bud” the idea of environmentally friendly vehicles. So, increasingly, there are models with electric motors. Development of technology of our time allows to do so.

The Principle of setting a motor mount similar to petrol engines. This will require, in fact, the motor, battery, parts for control, the controller.

Motor wheel

Another option that can be selected when creating a motorbike with their hands – the installation of motor-wheels. This option is suitable for those who are versed in electrical. Connecting the motor wheel requires specific knowledge, without which collect the electric scheme will be difficult.

In the sales package-wheel motor includes controllers, handles front and rear brakes, system “Pass”, charger.

Battery generates direct current. The controller converts DC to AC which, in turn, will actuate the motor wheel. At the beginning of the rotation of the wheel activates the electric motor. For it said the system “Pass”. The brake handles has a micro switch. He needed to during braking to disable the power supply from the motor to the wheels.

Setting the wheel motor is performed in accordance with the following steps:

• The Bike turns with the wheels up. The rear wheel is removed. In its place will be a motor-wheel. It fastens so that the outgoing wires are on the left (viewed in the direction of movement of the Bicycle). Due to this regulated by the direction of rotation of the wheel. If the parties are reversed, then the wheel will “go” in the opposite direction.

• Are attached To the frame controller and battery. The controller must be well isolated.

• Next, install and connect the rest of the details.

Assembling the electronic circuit, it is important to remember that the battery is connected through fuse (enough 20). It will protect the system from fire in case of short circuit.

Conclusion

As you can see, to make a motorbike your hands in several ways. Each of them has its own advantages and disadvantages. Install the motor on the bike not stopping to drive in the normal way (pedaling). It is enough just to turn off the motor and the clutch of the motorbike. It is very convenient when you want to ride slowly and do my physical form. Option bike, equipped with an engine (regardless of its type), is a good option for people who choose active lifestyle. It is both a vacation and a way to get around the city (and not only).