Cork for walls: overview, technology of finishing, types and reviews. The walls of the tube with your hands

Many people no longer use for interior Wallpaper, flooring, and other known materials. They want their apartment was unique and did not look like everyone else. So the great popularity was received by the tube walls. It is absolutely environmentally friendly and safe material with good heat and sound insulation. Thanks to a special impregnating material, the tube walls do not absorb moisture and unpleasant odors.

Key features

The Tube walls has several advantages. First of all, − it's versatility. The material used for the walls of not only residential buildings but also industrial, cultural institutions. To use it in your room, you need to have design skills. That is, the material should properly fit into the interior of the room.

The Following quality − porosity and density. Through this tube absorb special substances which protect it from moisture and odors. It is environmentally friendly, so the room can be a long time. Tube − it is a fragile material. To enhance its durability, the product is coated with ceramic chips. This material is used in manufacturing plants.

Types and their features

For Tube walls used for various types of coatings, but the main point is the wall. Product selection depends on personal preference. There are some types of coverings on wall:

• Cork Wallpaper;
• Cork platform
• Board or tiles;
• Liquid tube;
• Technical.

Next, we consider each of these options in more detail.

Cork Wallpaper

This is the most accessible and cheapest option, which is easily mounted on the wall. Technology is no different from the gluing paper Wallpaper. By construction, this decorative cork for walls, which is printed on a paper basis, which provides speed and ease of gluing. Also produce self-adhesive and Wallpaper. In order to attach them to the wall, you must remove the protective film from the back side and attach to the wall. These types are applied to solve complex design solutions.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

In addition, they have their drawbacks. Cork Wallpaper is too thin, therefore can't serve as sound insulation material. Also it is not recommended to use in areas where high humidity.

Panel of cork for walls

This material is more dense, it also is not exposed to humidity. These panels will last a long time if they are additionally be impregnated with a special solution.

Cork tile Board for walls

This is the most durable form of material which does not absorb moisture. This product can be used in rooms with high humidity such as a bath or pool. The data plate is still placed on the floor, while on them will be safe to move.

Liquid tube

This is a kind of material used for finishing exterior walls. This product consists of cork crumbs and the acrylic binder component, which contains different types of resins. The finished wall is not exposed to moisture. This composition is applied to the surface by spraying. The process is used for the construction of facades and roofs of buildings. Furthermore, the liquid tube is a good insulation material.

What colors are they?

Since the beginning of its existence, the tube walls did not please users of the color range. Such materials are produced identical, because of special demand for them. Over time, as they became more popular, there is a need to release other colors. This gave the opportunity to solve any design problem. The tube on the wall in the interior is essential for many buildings and premises. And specialists ' opinions confirm this.

Walls cork

This process begins with the preparation of necessary materials and tools. Tube walls, the price of which is in the range from 1000 to 2000 rubles, is available in size 300x300 mm. or 300х600 Before starting work acquire cushions, mounting knife, scissors, ruler and spatula.

Cork tiles or a Board attached to the wall using a special composition. Glue cork on the walls should be acrylic-based or contact. It must be applied not only on the surface of the product, but also on the wall. Cork plate can change his size, so before beginning work it should be placed in the room on the day. Thus, the material will adapt to the temperature and humidity. This procedure will help to avoid future strain on the walls.

Surface Treatment

After selecting materials it is necessary to prepare walls. The humidity should be 65%. This can be achieved by using a special humidifier. On temperature you should also pay attention. It should not fall below 18ºC.

So, proceed to the treatment of the walls. Their surface should be leveled and covered with primer. It is not recommended to use plaster based on gypsum, as well as one that is incompatible with tile adhesive. Next is the center of the wall, through which are vertical and horizontal lines. In the end, the wall is divided into two parts. This procedure is performed usingplumb and railway line.

Mount tiles

The product is applied to the adhesive and is applied to the wall. First glued the lower part, and then everything else. The material should fit snugly to the surface and to have no irregularities. Thus consider the origin of the tiles. Some models can break down, so it is recommended to take the corners.

Then pasted the whole row of tiles. It is better to perform by the method of “extension” − so it will not be visible vertical lines. The next row is placed with a shift relative to the first. If the tile was laid unevenly, it is possible to move, because the glue hardens quickly. Using a special cushion iron with the corners of each tile so that they fit snugly to the wall. Many craftsmen have executed a laying by this technique. There is nothing complicated. Only need to adhere to laid the first tile.

Sticker edges

This procedure is an important element in the decoration of the walls of the tube. To do this, impose one plate to the other so that one of its edges touched the corner of the wall. That is the number of tubes needed. Further, by mounting a knife cut the desired size, put a layer of glue and apply the product to the wall.

Sometimes, on the way be a socket or pipe. In this case, use the special templates. Apply them to a cork sheet and cut out. As templates using heavy paper or plywood.

How to care for your tiles?

If an operation is performed for the first time, you need to be prepared for the appearance of small gaps between the tiles. This is due to the fact that the leaves can change their sizes, that is, to expand and contract. This problem is easy to fix. To do this, cut the cork strip. Sheet, which is formed near the gap, gently lift the corners. With a brush apply glue to the crack. Then put the corners of a tile. So they are not moved, they should be pressed by a special roller. The excess glue is removed with the mounting of the knife.

To extend the life of cork boards, and to increase their durability, you should handle the material with a special solution. As a rule, products coated with oil or wax. This method has been known for a long time. On the market Today, you can purchase the liquid in which the connection between these two elements. Impregnated tiles can be used in rooms with high humidity, for example, in the bathroom or the kitchen.

Many artists suggest coating material varnish. For this sale a special acrylic-based. It should be noted that the cork tiles does not tolerate direct sunlight. When they act it is burned and changes color. On the Windows hung curtains.

Reviews

Many of the people that made the walls, cork boards, happy with them. They give the room a nice appearance and protect the walls from moisture. With its small cost cork-plate is a reliable material. The job of finishing the walls can be done independently. Everything you need − just follow the instructions.

At the end of the work can result in gaps between tiles, which arise due to changes in the sizes of the sheets. However, this problem can be fixed quickly with their hands. If necessary, a special team of craftsmen.

So, we have found that is a walls plug, and also considered how to care for the coating. The choice is yours!