How to make Smoking pipes with their hands: step-by-step description

Now, many smokers start to think about their health, many quit, while others are switching from cigarettes to normal tobacco, which is much less impurities. However, it requires a tube. The trading network offers wide selection, but really good copies are very expensive. Now we will discuss how to make a pipe of their own.

Material to create a Smoking pipe

Craftsmen make Smoking pipes out of briar. This build-up is in the root of the tree, called Heather. It is ideal to create such a specific product. After all, Heather grows in the rocky soil of the Mediterranean climate, and briar absorbs moisture and minerals, which subsequently provide the essential quality of the tree, so appreciate craftsmen who sold their pipes from it.

Local trees to create a pipe:

However, in our area, this tree does not grow, and if you buy it, it would cost a lot. You can do pipes with your hands, the materials are easy to find in local gardens. For the manufacture of pipes suitable fruit trees that have dense wood: Apple, pear, plum. But it is better to choose cherry, her most intimate fibers of the listed breeds, so she won't burn out. All the rest are also good, but they char a little faster. It is advisable to use for harvesting the root, but suitable twig or stem material. Fruit trees at the-Smoking have excellent taste. Some people like the taste of cherry, the Apple, it all depends on your own preferences. Here's another and for this reason it is better to make a Smoking pipe with his hands.

Preparation

To Determine the type of wood, you need to learn how to properly dry a suitable workpiece. Not to cut a live branch or part of the root and immediately make it up. On the material, paint over or obscure cuts, so that through them could quickly evaporate moisture. She has gradually come out through the crust, which in any case can not be immediately removed. And so the tree must lie until next year - then the fiber will gradually dry out and the structure will not crack. And only after this time it will be possible to remove the bark and carve the shape of a pipe.

It is also Possible to manufacture Smoking pipe from the dry logs. For this it is necessary to cut the workpiece from its center. Of course, if it was in a dry place. Cut extreme places with cracks, followed by solid wood, not having flaws. Now remove the crust and cut the desired size of the workpiece, but with a margin of five inches. Then the tree is postponed for a week because it's finally dry, after which it may appear microcracks. If you start to carve the shape of a pipe, then opened the flaws spoil everything. A week later, even if you see small cracks, they will be left stock, and after cutting it will be perfect for carving the surface.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Production Process

To begin cut out a simple angular workpiece, resembling a square or a rhombus. The surface must be sanded so that you can see the tree structure and determine if there are defects. If all is well, mark the future form more details to know where is the Smoking chamber, and where the shank-this is the part where the mouthpiece attaches. You need a pencil to outline all the details and holes. It is also worth to draw the directions below when drilling make it easier to withstand the corners.

Making pipes with his hands, the wizard in the first place drill a hole for the camera, which will nazyvatsya tobacco. First is to do it with a thin drill, then pick thicker, until the hole will not become the desired diameter. But do not just bring to final size, you need to leave an allowance of a few millimeters, then sanded it with sandpaper. Because the drill leaves a rough surface, and it should be smooth.

Then the side drilled hole diminua in the place where the planned shank. This must be done carefully, because the manufacture of pipes with your hands is very precise and time-consuming process. The hole for the exhaust smoke should be strictly on the bottom of the chamber for tobacco. This is very important, because if you make it a little higher, inside the tobacco will not burn completely, which can lead to acidification, and it will worsen the taste of the pipe smoke. This channel can be from 3 to 4 mm. Than it is wider, the tube will land. by the way, it better be equipped with a filter to prevent the ingress of ash in the middle. In addition, the broad smoke channel makes it easy to clean up with the brush. After the holes are ready and accurately connected, you can begin to create the external form.

Of Course, it is better to manufacture pipes with their hands on the machine, it will be much easier and faster. But when the lack of such equipment is still possible to make a good copy by hand.

Next (when working on the machine) need to make circles that you can, all other parts hand-cut, well-honed cutter. It is importantto make the edge matiza narrower than the full width of the shank. This is necessary in order to be able to wear the mouthpiece, and two parts were on the same plane. Then the surface is polished from inside and outside with sandpaper. First major removed all the bumps left by the knife, and then removed small scratches with smooth surface. However, you can leave the outer part of the raw - here it all is on taste of the master.

The Choice of material for mouthpiece

We Continue to talk about how to make a pipe, and now create the mouthpiece. It can be made of ebonite or acrylic. The first material is softer, but the Polish stays on it very long. It is best to choose those when Smoking holding a pipe in his mouth. Acrylic is more solid and durable, so it will fit in order to keep the product in my hands.

Production Process

You Need to take a stick of ebonite or acrylic, and in length from 10 to 15 see That when smoked the smoke has time to cool off pipes with their hands doing not shorter than 10 cm With this in mind, choose the size of the mouthpiece. It makes a hole throughout the length of the drill bit, whose diameter is 3 mm. Start with the part where there is the connection to the shank. After that, half the length of the hole to expand the diameter of the flue. Then, the step is formed to be smoothed. For this we need to cut the wire with a diameter of 4 mm triangular tip. You have to force it to the stop and gently rotate several times.

After that, the channel zashlifovyvayutsya using a thin wire glued on it with sandpaper. The place where the mouthpiece will extend horizontally to get oval, 5-6 mm. So the smoke will be easier absorbed by a smoker. On the other hand the hole in the mouthpiece expand to tightly sit on the bowl, however, without much effort.

External forming nozzle

Handled cigarette holders, and pipes, with their hands. You can grind on the machine or use the Toolbox. Form is also arbitrary. Then you need to sand the surface first with fine emery paper and then with felt with the GOI paste. If you do ebonite mouthpiece, it can be bent out to give a different form. For this purpose it is heated over a gas stove or a candle and then make the bend.

Wooden Smoking pipes with your hands can be waxing or for pickling - so the surface will be a luxury look, and the picture will be much clearer and, of course, is the perfect surface protection of wood.

Etching tube

Excellent mordant can be mashed in water potassium bichromate and oxalic acid. After reaction with evolution of gas ceases, this suggests that the compound is ready for etching wood. Than she concentrated, the color saturation and contrast of the image fibers of the wood. The tube is immersed in the composition until then, until it becomes the right tone. Keep the stain as much as anything in a glass airtight container.

Waxing

There is a great and easy way. Necessary wax. 100g need cut into small pieces, after adding the mastic (12 g), instead, you crushed resin (25 g). The selected mixture is put on fire to become a liquid. Then strip him and immediately pour 50 g of turpentine warm. After that, the mixture should be stirred thoroughly and pour into desired container. Her composition is stored until required to use. Take the mixture, put it on a wool or cotton cloth and carefully rubbing a tree.

Cleaning tobacco pipe

This should be Done when the pipe has completely cooled down. Necessary to carefully detach the mouthpiece, twisting it clockwise. If you pull it using uncommon strength, it is possible to damage both parts of the tube. The mouthpiece is cleaned with special brushes, or hiding them from the mouthpiece. It is better to have several of them, for a more convenient process.

You Need to clean the bowl after each of the Smoking process. Brush the plant with the side where was the mouthpiece. After it is all cleaned, the brush is left inside the bowl until it comes time to fill the pipe with tobacco. Completes the cleaning by wiping all external surfaces. The tube is blown to eliminate any carbon deposits or debris that may remain inside.

For General cleaning tubes use wax, alcohol, and various other liquids, is carried out the extent of contamination. And only the owner knows when simple maintenance is not enough.

Now the phone is rather an element of decor, smoke it rarely, because for her to care. They now, like a good wine, which only from time to time relish. There are also a lot of accessories for such extravagance (supports for pipes, for example), which can be of different shapes and sizes.

What is the difference between the most expensive and collectible of the tube from the ordinary

In the first place is the perfect material – briar. In the collector's copies, which are the most expensive, visible fibers of this beautiful tree, woven chaotic, however, the wizard presents them as if they were grown specifically for this pipe. They are like the rays which envelop Smokingthe camera pass into the shank. This piece of art, collectible Smoking pipe, is always enthusiastic reviews not only from knowledgeable people, but from ordinary people. Because the masterpiece always has a special aura and, of course, appearance. And looking at it, you can't catch yourself thinking that you can change its shape or appearance. This is the talent of the master.