Soldering station with a Hairdryer with your own hands: manufacturer

To repair various kinds of machinery require special equipment that is not so cheap. For this reason, many electronics come up with ways on how to make your own hands soldering station with a Hairdryer. It turns out that this device can be built from improvised means. Particularly difficult in this procedure, there is nothing, but the following recommendations will help to determine the optimal variant of the device.

What is it?

Made with your own hands soldering station with the hair dryer is a special equipment which can heat up to extremely high temperatures, which gives an instant glowing metal bends. The device has a fairly simple design, allowing to understand the Assembly novice electrician, not to mention the professionals.

It is Worth noting that soldering dryers are combined together with other equipment, which makes it possible to guide the tool accurately. Consider the Assembly refers to semi-professional devices. They can perform several different tasks, regardless of difficulty level.

Distinctions

Soldering station with a Hairdryer are made may differ in some respects. Among them:

• The size of the working tip.
• Power Indicator.
• Capacity of block air cooling.
• Maximum operating temperature

From these indicators depends on the quality of the fixtures, so they should be given special attention.

Design

Consider the units allow to melt plastics and metals with relatively low melting point. Softening of materials is carried out by blowing a hot air stream heated by special coils. As the main work item, you can use various analogs that have the General structure. For example, a homemade soldering station with a Hairdryer. consists of the following parts:

• Body part.
• Heating element.
• Air blower.
• Arm.
• Switch.

Some variations are equipped with an indicator and regulator of the degree of heating, as well as special nozzles, giving the opportunity to implement specific projects of varying degrees of difficulty.

How to make a soldering station with a Hairdryer with their hands from improvised means?

As for the case, you can use useless or unwanted devices and steel tube. In the process the base will be heated to the maximum temperature. To work with it should wrap pipe heat-resistant material.

The Basis for self-made equipment will serve as a domestic Hairdryer, the role of the heating element acts as a spiral. The constant air flow provides a small fan attached to the handle. The spiral is made of nichrome wire that is twisted with a small step between turns. As grounds suitable metal with low thermal conductivity. Reeling spiral, ensure that few inches at the base remain free. This part of the surface heat-resistant fabric for retaining fit in the hands. The nozzle is better to build from ceramic or porcelain, and the increase in efficiency can be achieved by equipment of thermal protection.

Security

After the build is complete soldering station with a Hairdryer, structure will have the configuration of the gun. For convenience it can be attached to a special holder. For safety reasons all exposed wires must be insulated. At the final stage mounted switch and plug in the power cord. Then begin testing devices. At observance of safety rules and Assembly, design to build by yourself will not be difficult.

Varieties

How to choose a soldering station with a Hairdryer? First of all, we must remember that this equipment is divided into two types:

1. Turbine models in which the moving air meets an electric motor. This creates a powerful stream.
2. Compressor options. Such mechanisms are based compressors, the air flow in them more.

According to the principle of both types are identical and indistinguishable.

Analogue of a soldering iron

Alternatively, for the case of the soldering station with the hair dryer with your hands, you can use an old soldering iron. You must first removeall of his insides. Be careful not to damage anything. In addition, you will need a halogen lamp of 2 kW, which will quartz insulator.

Using the cutter on the glass trimmed the ends on the tube with one hand put on the technological tip, which making the socket under the heater. As the last element use nichrome plate with a thickness of not more than 0.7 mm.

In the manufacture of their own hands homemade soldering station with a Hairdryer, should follow a specific sequence:

• Quartz insulator neatly embedded in a spiral.
• To reduce heating of the device, the insulator is wrapped with foil.
• Heating element mounted in the housing and fixed by a wire from the handle.
• There also put the prepared block, pre-wrapped with asbestos cord (for convenience, and reliability of landing in the nest).
• Supply Hose within the handle that connects to the compressor.

Feedback on this soldering station with a Hairdryer

Consider the device – it is an indispensable tool in the Arsenal of any Amateur radio and electronics. According to user reviews, correctly assembled homemade equivalent is not inferior in effectiveness and capabilities of the factory instruments. The cost of this design is “penny”.

Owners noted that many beginners are allowed a number of standard errors. First, a conventional dryer, despite its power, is not enough for full operation, although some “artisans” carried out the production of the soldering station with out of the spiral and the fan of the appliance. Secondly, experts say that the way to increase the heat by lowering the speed of rotation of the propeller and the reduction of the hole diameter leads to the output of an instrument failure and meltdown of the housing.