Sewing slipcovers for furniture the hands

Sometimes old furniture or seats in the car spoil the interior as its pretty worn. Throwing them away is not always desirable, or simply can not buy new furniture because of the high cost. The best solution in this situation would be sewing slipcovers for sofa, chair or seat. This will not only breathe new life into the furniture, but will allow you to save a substantial amount of money.

Where to start sewing slipcovers?

Refresh old furniture with new covers under force to everyone who you have a sewing machine and have basic knowledge in sewing To work you will also need:

- cutting scissors;

- safety pins

- strong thread;

- chalk, or a special pencil.

- various items for decoration (optional).

First we need to find the right fabric. The choice in this case will depend on several factors, the main of which is durability. If the furniture is not often used and performs rather a decorative function, the cases for it can be made of velour, tapestry or flock. In large families where there are small children or animals, covers for furniture made of extremely durable, wear-resistant and not prone to creasing of fabrics. In this case, suitable relaxation or jacquard. Their cost is much higher, but they will last much longer.

Sewing car seat covers need to be produced from specially designed fabrics. It is best to use a car jacquard, flock or viniliskozhu. These materials have a high wear resistance. They are easily transferred to oil pollution, frequent washing or cleaning.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Select your fabric by color

The Next step is the choice of colour of a material, which will be sewing slipcovers. The furniture should harmoniously fit into the interior, so I'd rather her tone combined with the color of the walls or was most suitable style.

If the room interior is executed in the same hues, and it lacks the zest, then, for the furniture is better to choose a bright fabric, which is beneficial to refresh the situation.

Sewing slipcovers for the car is made from fabric that is selected on the same principle. The color of the material used must fit into the interior without damaging its interior. Sometimes the bright colors of the seat covers can spice up the atmosphere in the car, so you can give preference to fabric flashy saturated colors.

Building the template

The Pattern, which is to be sewing slipcovers for the furniture, you can do this in two ways. The first will be suitable for experienced craftsmen sewing, know how to build patterns for the blank standards. You will need to measure the furniture and according to the received data to build a pattern taking into account allowances for seams and hem the edges.

People who are not a master at sewing, better to use another method. To build the pattern, they will need greenhouse film. It should be applied to all parts of furniture, whether it is backrest, armrest or others, and delineate the areas of alleged seams. Then drawn on the tape parts to be cut, and the pattern is ready.

Sewing slipcovers for chairs with simple and inexperienced in the manufacture of such products people better to start with him. After the first satisfactory result, you can proceed to more complex work: to sew a cover on a sofa or easy chair.

Preparation of fabric for cutting

To the new cell is not deformed during use or after washing, the fabric from which they are made, must be subjected to special treatment. For this it is necessary to wash, resuturing, dry, and only take on tailoring.

But remember that some materials such treatment is contraindicated. If sewing seat covers car will be made from viniliskozhi, then heat treatment is better not to. Too high temperatures can damage the material.

How to cut parts?

Transferring the pattern to the fabric when sewing slipcovers for furniture, you must consider some of the subtleties. Seam better to do more than the tailoring. Ideally, they should be at least 7 cm in Order to avoid mistakes when cutting, must be put on the fabric pattern, outline it and add around the perimeter of the size of the allowances. If during the construction of a pattern the size of the allowances were taken into consideration, then you will need to transfer the pattern into the material.

If sewing slipcovers for furniture made from fabric with a pattern, the pattern pieces must be expanded so that after stitching match. Otherwise, the case will not look very nice, and all your efforts will be in vain. To eliminate such trouble, it is better to use for sewing cover material with a simple pattern that does not require a strict match, or solid.

How to sew covers for upholstered furniture?

Case looked nice on the furniture, he got to her good to lie down. To achieve this difficult, but still possible. Before sewing the pattern pieces be bonded directly on the sofa (armchair, chair), expanding them in advance. The fans need to fasten with pins. Performing sewing of covers for furniture this wayyou can make perfectly suitable for the size of the product.

After the bonding of parts the cover must be carefully removed from the furniture and connections to flash a bright thread. For confidence after smachivaniya it is possible to try, and if necessary to correct. After that, all seams to stitch on the sewing machine.

The Finished bag should be resuturing, to steam the seams and wear on the furniture.

Do Not worry if sewing slipcovers with their hands slightly failed. With a little imagination, mistakes can always hide decorative elements. Uneven stitches can be hidden behind beautiful lace, satin ribbons or fringe. If the errors are too large, and the case was too small, you can increase it with various inserts, beautifully issued.

Sewing slipcovers for car

Car covers are sewn by a different method. To fasten them on the seat quite uncomfortable, so after cutting all the parts smachivaetsya on the drawn lines. After this is fitting. If the case adheres perfectly to the seat, it is possible to sew. Otherwise, you need to correct mistakes. After pretrazivanja machine all the seams in case you need to sew a zipper, elastic bands or Velcro. The finished product must be iron if the material can stand high temperatures. Articles made of leather or other materials, which do not exposed to high temperatures, iron is not necessary.

Sewing cases – a very interesting and useful exercise. It allows you to make use of time, transform an apartment or a car to save money. If the cover will be very beautiful, their tailoring may be for you an additional or even main income. A good product will always be evident to guests or passengers who might want to order for your furniture to beautiful covers.