Finishing materials for the façade of a private house: review and recommendations. The best modern materials for facade

The importance of the external appearance of the building is difficult to overestimate. How successfully will be selected finishing materials for the façade of a private house, and how well done the entire work depends on the first impression of the room and its hosts.

External finishing works

Today, building market offers a variety of finishes for the facade of a private house, starting with a variety of plasters and ending with modern variants. When choosing you must consider the operating conditions of the building (climatic and ecological), number of storeys, type of materials the walls and the characteristics of the footings. Also taken into account as a purely personal preferences of the owners and their financial capabilities.

Plaster

This way of furnish of facades is quite famous and very popular. Plastering of the surface allows to obtain smooth walls, and will further strengthen and insulate them.

The Solution is to plaster consists of cement, lime, sand, water. If desired, you can add various additives. Plaster is applied on the prepared surface. For this purpose it is pre-cleaned from dust and impregnated with a special primer deep penetration. To increase strength and durability, it is reinforced by the mesh.

There are many options of decorative plaster. The most popular are the “bark” and “furAnd”. First it is applied like ordinary plaster. Technology application "coats" of another. It is performed by applying the plaster to the surface through a sieve with cells of a certain size.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Siding

This material is for the facade of a private house, appeared relatively recently. Siding refers to a rather simple, available and cost effective method of cladding. Its installation does not require special knowledge, takes little time and is performed by installing vinyl or metal slats, which are fixed one after another. Finishing the house siding ensures a good ventilation, to increase thermal and sound insulation function of the wall, conceal all the defects and also to protect the building from external unfavorable influences. It is an environmentally friendly material. It is of several types. The most popular is vinyl siding, which has good strength, lightness, resistance to atmospheric phenomena. This modern material is used for cladding new and old houses.

Metal siding (aluminum and steel). These finishing materials for the façade of a private house have their advantages and disadvantages. A distinctive feature of aluminum siding is the ease and great strength. It does not burn, but it requires staining or use as protection special PVC film. In addition, this siding is easily bent, so it can see all the dents.

Steel siding. This is more durable and reliable material. Its main disadvantage – quite a lot of weight. For this reason, this type of siding is suitable for buildings with a good Foundation. Facade of small private houses it is used very rarely.

Ceramic tiles, porcelain tiles and stone

These finishing materials for the façade of a private house included in the category quite expensive and time consuming options. Due to the price and the complexity of the work, they are not quite popular finishes that still require certain skills and abilities. So all that work had better be left to professionals. The advantages of these materials include durability, strength and ease of maintenance coverage. In addition, this finish can make the facade of a private house of individual and original and not like the others. More common combo finish.

Decorative brick

Currently, the building materials market offers this material in many different shapes and shades. The technology of masonry and decorative bricks is practically no different from laying a normal, however, it is important to remember that it requires a more precise and accurate work. Advantages of the finishing material are impressive and beautiful appearance and the possibility of laying the insulation between the trim and the wall. Usually the clutch is carried out in parallel with the construction of the walls. The binding between the brick and the wall is carried out using the masonry grid. With the walls already built homes in order to create a reliable stop for masonry basement a little increase. And only after completing this work, proceed directly to the installation of decorative brick. If necessary, the gap between the wall and the walls are additionally insulated. For this is goodthe expanded clay. Furnish of facades decorative brick due to the individual design, textures and colors allows you to make the appearance of the building is quite original and unique.

The Tree

The facades of the houses with wood allows us to build a more rich and expressive. As a finishing material in this case is the Board in various fields. Plating is performed both horizontally and vertically, as the overlap and butt. This type of finish provides additional protection of the house from the effects of precipitation (rain, snow), effects of ultraviolet radiation, different mechanical damage. To increase the degree of protection of the structure from the draft under the wood paneling is placed a substrate made of a film or building paper.

Wooden facade of the house can be painted in different colors or the use of special protective and decorative impregnation, which retain the natural texture of a tree.

AndReroundTh foam

Front panel and various decorative elements made of reinforced foam,the – inexpensive finishing materials for facade, which is both a heater and decor. They can appearance to simulate different materials, for example brickwork. On the surface just to apply paint of the desired shade.

And for facades in the classical style provided by the use of various decorative elements such as moldings, cornices, balusters, pilasters and other manufacturers they are made of foam, having a top protective coating. The elements are assembled simply. This applies to a special glue.

Architectural elements

These new finishing materials for the facades, as columns, bas-reliefs, cornices and pilasters provide an opportunity to greatly diversify and enrich the exterior of buildings. They can be in the form of traditional stucco, and the finished elements. These architectural finishing materials for facades of artificial elements that simulate, for example, natural stone, pretty light and not heavier fronts. Even lackluster house with their help it easy to turn in a mansion in the classical style.

Well-chosen modern finishing materials for facades allow not only to emphasize the architectural advantages of private homes, but also significantly improve them. The application of the combined finishes of different materials allows to achieve exceptional originality and uniqueness of any standard building.