Adhesive for glass: application features

Universal adhesive for glass is designed to work with different materials. It allows you to string together glass surfaces, gluing glass stones, metal, rubber, wood. It can be used to repair the mirror, and laminated glass is also damaged cars.

The Glue is made on the basis of oligourethaneacrylates, and in appearance is colorless transparent homogeneous low viscosity liquid which can be photopolymerizable. The setting time of the connected surfaces is about 30-70 seconds.

UV glue for glass and metal requires no processing of materials prior to bonding. Technology enough to walk on the surface of the wiper. Hardening polymer forms a durable layer which has transparency, colourlessness and moisture resistance. In addition, it provides reliability in high vibration environments and has sufficient tensile strength. Operating temperature ranges from minus 40 to plus 150 degrees.

Glue for glass: material selection

When you choose components for bonding should be taken into account that different compounds in the end will have a different strength.

Maximum strength have such schemes as glass with metal (stainless steel), glass, granite, wood (solid rocks), patterned glass and passed sandblasting.

Glue for glass: surface preparation

Connect the material must be absolutely clean, dry surface free of grease. To clean use the wiper, which is isopropyl alcohol. To get a stable long lasting connection, you need to heat prior to bonding the joints to a temperature that exceeds the room at 30 degrees. This will remove the condensate. The heat produced evenly and slowly, preventing the connection of the internal stresses. Failure to comply with these terms may result in a loss of strength, including the destruction of the connection.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

Adhesive for glass (transparent): application

Be sure to check again as the mating parts will be positioned with each other. The glue must be applied within five minutes after heating. It is recommended to apply a uniform thin layer. Excessive quantity, and the presence of bubbles will reduce the strength of the joint and require removal of excess material.

Glue medium-viscosity is required to apply to the connection of materials, and low viscosity due to the capillary activity, able to penetrate into the gaps of the joints, so the surface can be bonded before applying the adhesive agent. It's worth noting that the smoother the fastened surface, the lower adhesive layer, the stronger the connection will succeed.

To complete the bonding, you will need a UV lamp power of 45 watts, which after applying the adhesive should irradiate the glueing. This procedure produced within 20-70 seconds, the lamp must be placed as close as possible to the bonding surfaces.