How is the replacement of the hardware in the plastic Windows with their hands

The Replacement of hardware in the plastic Windows does not cause any difficulties even for inexperienced person, subject to reviewing the available features of the work. This reduces the probability of failure of parts and of the glass. The choice of a new mechanism requires special attention, as it has many important nuances.

When you need replacement accessories

The Most common problems arising in the operation of plastic Windows are:

• Water ingress and dust into the room through the sash;
• Low isolation level;
• Freezing the window construction;
• The occurrence of draught.

All of this points to the presence of defective or malfunctioning machinery. Adjustment of the handle and hinges often eliminates such problems. If after that nothing has changed, you will have to buy and install new machinery. Also there is a need to repair when a malfunction of the handle and the misalignment of the window construction.

After you have discovered the first signs of malfunction, must be immediately replaced fittings as this may damage the frame and sash with long-term use of elements that have failed.

Before starting work, you need to understand exactly what the essential accessories. The best option is to purchase devices that are identical to those already installed. Due to this, it is possible to avoid a situation where the elements are unacceptable, and to reduce the time spent on installation. With careful examination of the mechanism, it is possible to find manufacturer markings. In the case of its absence elements must be removed, and, arriving at the store, ask the consultant to find the same.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

What you'll need for installation

The Replacement of hardware in the plastic Windows with their hands, despite the simplicity, it requires a certain set of tools:

• Keys G-shaped form;
• Hexagons;
• Pliers;
• Slotted and Phillips screwdriver;
• Grease (automotive or silicone).

The Most essential is the stars G-shaped form, it is desirable to purchase in advance. In some cases there is a need in carob keys, having a small thickness.

Replacement accessories: progress

The Window handle because of its heavy use breaks more often than other elements. The dismantling of the old unit and installation of a new implemented in the following algorithm. For a start pushed back decorative plastic insert to ensure the free access to the mount. The screws that hold the handle, unscrewed a Phillips screwdriver. Now it only remains to mount the new handle.

The Need to replace the hinges occurs less frequently, and the repairs are carried out quickly and easily.

The escutcheon is Removed, it is enough to pull her up with little effort. From sashes and the frame is separated mounting of hinges use a hex or Phillips screwdriver. For the Assembly is the reverse procedure. The axis of rotation of the device is dismantled in the same way.

You May experience difficulties if failed the loop itself, not the cylinder. And if the first replacement of fittings of plastic Windows does not cause difficulties, the installation of the new parts takes a lot of time. Sometimes the holes on the purchased loop does not correspond to fasteners on the frame, in this case, you must make a new one. For this purpose in specified locations of the window frame, holes are drilled using a special template. Invalid errors can be avoided when drilling through the template, and not by marks. Before starting work it is necessary to study the internal structure of the frame, so as not to damage the structure of the glass.

How to extend

Like any other devices, plastic Windows requires systematic care. For example, to the replacement of the hardware was carried out as seldom as possible, it should be cleaned and lubricated twice a year. Such preventive action takes a bit of time and money, while they provide an increase period of operation of the design and all elements. On moving parts apply silicone based lubricant, it does not damage the material and gives greater mobility. Seals also require periodic cleaning and lubrication.