When you want to make repairs in the bathroom, the question arises how to set up the tank for the toilet. Before to do the main work, you will have to arm themselves with simple guidelines. Do not always need to enlist the help of professionals. You can own to cope with the task.
The First thing you need to do – to figure out which option is more suitable. The tank of the toilet can be of three types:
When solved, what is the tank of the toilet will be mounted, you can proceed to the main works. In order not to make mistakes, it is better to have the manual for each species. The work will need to have on hand:
In Addition to the individual characteristics of each installation type has common elements. In this case, the steps should be the following:
These are the moments that need to be done always when installing the kit. In addition, each type has its own characteristics when mounting. This is what should know everyone on an individual basis.
Recommended
The most effective methods of seed germination
Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...
Retro-reflective paint. The scope of
When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...
How to make icon with your own hands - options izgotovleniya (simple and complex)
In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...
To Cope with this setting everyone can because the system is very basic. But there is an important point. When connecting all the components of a single design, because to purchase the items separately will not work. The basic steps for fixing cistern:
In this case is the tank of the toilet separately. Most often it is fixed high, and the connection occurs by means of a special tube (drain). In the process you need to follow the following steps:
It is Understood that after the installation is worth a good look, a flowing bowl or not. This step is frequently skipped, but in the end, you have to re-disassemble design.
The name Itself suggests that the need to hide the installation in the wall, and mounted in design. So, there is no special system flush. Better to use moisture-resistant drywall. The material looks aesthetically pleasing. Many people say that when you can't see part of the structure, it is easier to clean the bathroom. The toilet is in a suspended state. Separately to buy the tank for the toilet. The main thing that he came up through the mounts and design.
Sometimes this type of installation made of plastic. This is a big plus, because it is easier to produce installation work. In addition, there is another advantage-it is low cost. Everyone will find in the kit needs fasteners. Also for the device requires a mounting frame. But it is made individually by size.
The First step – it connection with the rest of the frame. Then you can understand how much water is required for thorough draining.
There are two buttons to clear the water. One half pours water and the other full. This method allows you to simply save, can not be said about the standard units.
Fittings for toilet tank – element, without which you will run the plumbing. It not only allows you to fill and drain, but also to control the process, avoiding overflow. The valve includes components such as:
The work Itself has several important elements. You need to focus:
When the toilet bowl and tank set, need to deal with the fittings. So any steps occur in phases. Installation of rebar comes in several basic processes:
When you create a system of water supply, it is not necessary to apply unnecessary elements. Remember that it is impossible to prevent severe bends, otherwise the water hose just slips. At this stage of the rebar is completed.
Most Often does not occur any problems when installing this equipment. But it is better to know and be able to do everything correctly and properly. So, the work will be easy if you follow these steps:
You Also need to adjust the flow of the small stream of water. This is required in order to prevent excessive release of bones lived. Everything will depend on flap. Depending on the situation, it goes up or down. After completing these works, we can assume that the fittings on top of the cistern of the toilet is fully configured and ready to use.
Replacing the old tank to the new is a pretty common operation. But with the old toilet, this design will last less long period of time. This is not so difficult, but there are simple guidelines. The most important thing is dismantling the flow of water. But in General to collect such design will be able everyone without much difficulty and complexity.
The collection system will depend on the selected type of the toilet tank. Do not break the consistency of the process, otherwise things can fail to work. You need to make a mount, otherwise leaks occur. Good to stock up on sealant and silicone, without them will not work to make the most reliable system. Not always necessary to turn to professionals, because this operation is extremely simple and quite feasible with their hands.
Article in other languages:
BE: https://tostpost.com/be/hatn-tul-nasc/22602-zl-ny-bachok-dlya-n-taza-nstrukcyya-pa-stano-cy.html
DE: https://tostpost.com/de/gem-tlichkeit/22607-zisterne-f-r-wc-sitz-einbauanleitung.html
PL: https://tostpost.com/pl/komfort-domu/22548-spustowy-zbiornik-wc-instrukcja-instalacji.html
TR: https://tostpost.com/tr/domashniy-uyut/22599-bo-altma-kab-tuvalet-kurulum-talimatlar.html
Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."
Related News
Important device - collector Cabinet
What is the equipment, the name of which appeared in our everyday life relatively recently? Collector wardrobe – a device that distributed the flow of coolant along the contours of heating and water. Most often they are inst...
Concrete heating make winter construction feasible
the Construction of industrial facilities of metal in our day does not stop for a minute, even in the bitter Northern cold. This involved highly skilled builders to implement its activities in advanced technology winter constructi...
Household air purifier – customer reviews
usually in homes and offices for the climate to respond conditioned. But besides them there are other devices that are designed to help in the fight against dust and stifling heat in our apartments. It is especially important to m...
Sports area in the children's room: happy future of your child
Children's room with a sports area – the dream of all boys born in the Soviet Union. But then the kids had other priorities. They spent a lot of time outdoors playing outdoor games, didn't know what a computer is, and dreame...
The polyphosphate filter: description, characteristics, types and reviews
Tap water in each region has its own stiffness. And the softer the water, the less the scale remains on the heating elements of household appliances such as electric kettle, washing machine, boiler, etc. to reduce the amount of ni...
Unusual shelves on the wall without the cost
Agree, sometimes want to complement your interior with something original, but not to spend money! Will try to do it with the help of kitchen shelves on the wall. This exclusive piece of furniture in retro style is made from an ol...
Comments (0)
This article has no comment, be the first!