What to do if the pump is stuck in the well?

Submersible pumps which are used for water supply from wells on the site, periodically require maintenance. It happens so that the equipment required to get minor urgent repairs. The rise of the device caused by a replacement unit for a model that is more powerful. This need arises with the time when the old device served its time.

The Surgery to remove the submersible pump, it's not always successful, and the downhole pipe is sometimes the place where the pump is simply stuck. Sometimes equipment stands firmly, and the owners of the land, faced with such a problem, don't know what to do, not to break the rope.

Main causes of jamming

If the equipment is stuck how to get deep pump from the well? First we need to understand the basic reasons that may occur such trouble. Usually they are caused by the human factor.

During the installation of the pump can be broken technological requirements fixing elements of the device. Sometimes it happens so that the quality of their manufacturing requirements that were not met. A favorable outcome when it is not expected that manifests itself during the dismantling of the pump.

What to do if there is slack in the cable

If you are also faced with the question of what to do if the pump is stuck in the well, first we need to understand the reasons. Sagging electric cable occurs most often. The cable is in a loop which is wrapped around the body of the equipment. At the same time to pull the instrument with all his strength is not necessary, as it will not lead to success, but the cable can simply be broken. In this case, it is quite difficult to do something on their own.

Recommended

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

You can try to push the appliance back. You can do it on their own. You can attempt felt slack. In this case, you need to start a leisurely climb. It is better to prevent the above described situation, than to try to fix it. In order not to face a slack in the electric cable should fasten it with clamps to the hose or pipe. And it must be done at the stage of installation of the system. To the cable cable locking is not recommended, as the clips in the process of operation can fly. Hoisting equipment, you must ensure that the cable and the hose was left on the surface at the same time. It is important to eliminate slack in one or the other.

Silting wells

If the pump is “Baby” has stuck in the well, perhaps the reason for this was the siltation. This happens quite often when source water is not used for a long time. The result is a layer of silt, which becomes an obstacle in the way of equipment.

If you are faced with a similar problem, it is necessary to shake the unit. During this the device can be lowered or raised. This will mean that water will begin to erode the sediments, and the road to the top when it will be released that will allow you to retrieve the device outside. One should not rush at the same time, showing excessive activity. Because otherwise can happen deaf jamming unit.

If the pump is stuck in the well, how to pull it off, you will be able to understand only after determine the cause. If it acts the accumulated silt, it is possible to use a non-standard way of dealing with it. To the solution of the problem should involve fire, which sleeve can erode sediments. The sleeve is lowered into the well. When the pump is released, you will be able to understand this, because he is gradually going up. To eliminate siltation of wells that must be it preventive cleaning with some frequency, which is once in three years.

Navigating the complex solid obstacles

If the pump is stuck in the well, how to get it, you will be able to understand if the self is determine the cause. It sometimes becomes a solid obstacle, which can be considered quite complex barrier. If the path of movement of the device was found this barrier, you will be able to find out the characteristic knock. The mash will act as a wedge and as it sometimes appears:

• Tapered edge of the tube;
• Marriage in the Assembly of the column;
• Burrs from the weld line;
• The dent in the pipe.

The Latter may occur due to movement of soil. With regard to burrs, is a problem of the brigade, which worked well. The cause may be another, and the marriage of the sedimentary column, which is expressed in the axial displacement when the threaded connection or welding are carried out poorly. The pump in this obstacle will be to pass freely down, but up could not move.

If you have well water and the pump stuck in it, you will be able to solve the problem by the method of rotating the equipment with the pipe around its axis. Thus a barrier that stood in the way, you can go around. But the probability of the release movement of the device is not one hundred percent. Success can be instantaneous. However, the taste still stands, because in each situationthe problem can be resolved in this way.

Sometimes there is a situation in which a solid obstacle falls into the well. It is a tool, a foreign object or part of the fastener. Stopping the pump when this happens during a sudden rise. Learn about this you can unexpectedly. When the device gets into a gap between the pump and the wall of the borehole, a solid object will not allow you to remove the equipment that is the cause of the jamming.

A Move down it will remain free, while the spaces upstairs will vary depending on the sample cable. Experts suggest to call the professionals to solve such problems, because only with the help of appropriate equipment can remove the obstacle.

Reverse silting

If the pump is stuck in the well, the ways to get it, you can learn if you read the article. Among other problems, it is possible to distinguish the effect of back-siltation, which occurs where the well is located in the limestone soils. In continuous operation the sediment will continue to grow over the place where the equipment. The result is a tube. To stop this process, the well must be subjected to a cleaning every three years.

Additional guidance on extracting

Stuck with a broken pump cable can be removed using a metal fixture with pins. The people they are named cat. The pump will be possible to catch what is considered a big success. You will be able to grab the end of the hose or cable, then the equipment will be able to pull up.

In order For the pump to push down, some inventors use a crowbar, tied to a rope. You should strengthen them sufficiently strong, so that he did not stay inside when you throw it. So you will be able to act in case the old device that is not supposed to operate on. The chance of machine damage is very large, but work this technique can with a small depth of the device.

If the pump is stuck in the well, it is possible to use a tube, which is welded to the ear. Through the pipe passed the rope, cable or hose, and after the device is lowered on a separate rope inside. Under pressure from the weight of the equipment will be able to slip down and hang on the rope. At the same time should pull the pipe and pump to the surface. The weight can reach 50 kg, so for work it is necessary to enlist the help of another person.

More tips

If the pump is stuck in the well, and its suspension has been interrupted, when the power extraction is possible to fix the equipment in the tense and tapping on it periodically. When there is a weakening of the rope, you can re-pull and knock again. These steps are repeated for a few days. Method is suitable only for the most patient of masters, but succeed only in certain cases.

How to prevent the problem

To ensure that the pump is not stuck in the well, you can try to prevent similar situations. For this purpose, the quality of the cable do not save. For hanging submersible equipment must be purchased fasteners and stainless steel cable. The inside of the well is not recommended to use pieces of the cables and hoses spliced together. When lifting weaknesses may differ, and the scraps will be bent and cause jamming of the device.

Purchasing a pump is recommended with the expectation that he had the minimum diameter for a particular bore, which will increase the gap between the walls and the housing. Pumps of small thickness are more expensive and more bulk counterparts, but when comparing the difference in cost with the price of a new well purchase slim device becomes profitable.

What's more, it is important to remember

Replacement of the pump will reduce the chance of it jamming in the future. Well, it is recommended to install a cap that was made in the factory. It must be mounted so that it is positioned as close as possible to the pipe walls. This detail will eliminate ingestion of debris and random items.

Conclusion

If the pump gets stuck in the well, many artists begin to come up with creative ways of solving this problem. Pushing them is the high cost of the services of those firms who are engaged in this direction. Sometimes the cost of the specialist's work for such a company reaches the cost of installation of a new well. To save the budget, you must try to do everything possible to prevent jamming of the equipment or try to solve the problem yourself, but this is not always possible.