Rack ceiling for the bathroom with his hands photo, installation instructions

Date:

2018-03-21 23:39:20

Views:

480

Rating:

1Like 0Dislike

Share:

Table of contents:

Rack ceiling structure to become in recent years more and more popular for many reasons. They look attractive, are versatile, last a long time, and the cost is not very expensive. To undertake the installation, you can additionally save.

Moisture-resistant Construction, is characterized by low weight and ease of care. This is especially true for bathrooms. If you have minimal construction skills and have the appropriate toolset, to engage in self-ceilings and you can quite.

Design features

rack ceiling bathroom

If you decide to install a suspended ceiling in the bathroom with their hands you should start to see the design of this system. It is a kind of suspended ceilings and can consist of panels based on:

  • Steel;
  • Plastic
  • Aluminium.

The set comes system for fixation of rails on the wall. The product can have a thickness up to 0.7 mm, while the width varies from 50 to 300 mm. Maximum length is 6 m. it is Noteworthy that suspended ceilings are often made to order according to individual sizes, in this case, the length can be adjusted with millimeter precision.

Suspended ceiling rack in the bathroom installed in the last turn, after completion of surface finishing. This applies to rough the base of the ceiling to be plastered.

More on preparation

rack ceiling in a bathroom photo

Before heading to the store for material, you should measure the room and decide what kind of lighting in the room. If halogen lamps will be a few, it is necessary to define their type. This will allow us to understand how high you need to drop the ceiling. This value should be 20 mm larger than the height of the light source.

Recommended

The most effective methods of seed germination

The most effective methods of seed germination

Despite the fact that the method of seedling in vegetable production is a very time consuming process, it is used by most gardeners. Planting seeds in open ground is an easy and convenient method, but it is effective only in certain climatic zones. I...

Retro-reflective paint. The scope of

Retro-reflective paint. The scope of

When the vehicle began to fill the road, their popularity began to gain reflective paint. Thanks to this paint, as drivers and pedestrians becomes much easier to avoid accidents in the dark. Purpose paint Reflective paint – paint material, whic...

How to make icon with your own hands - options izgotovleniya (simple and complex)

How to make icon with your own hands - options izgotovleniya (simple and complex)

In Soviet times, many collecting badges, emblems, pennants. To get them was not easy. And today, thanks to technology, you can make them yourself. Knowing how to make icon with your own hands, and you can make original gifts to your friends, and make...

A ceiling for the bathroom furnishing of the items that are matched in length. Manufacturers offer for sale panels 3 and 4 m. If the width of the room is 1.5 m, you can purchase a better three-meter rails, which are in the process of installation is divided in half, allowing you to get the desired width. Waste will be minimal. When buying a ceiling you have to increase the amount of material 10 %. Another important aspect is the number of corners in the room. If more than 5, then you can purchase additional carrier rail.

Selecting a variety of rails

rack ceiling in a bathroom installation with your own hands

Before you purchase a ceiling rack coating, you need to understand its variations. It can have a glossy or matte finish. Sometimes the slats have perforations. If you want to make the room unusual, you can choose slats that mimic wood, leather or other natural materials.

The Shape of products can be rectangular or rounded. Colors for ceilings are offered in many types, so you can pick a color for the interior. When mounting to position the structure along or across, a rather interesting solution is the installation on the diagonal. This allows you to visually adjust the dimensions of the room.

The Ceiling of the described type can have intermediate joints. If they are open, the width of the gap is about 1.5 cm When this installation is completed by fixing decorative profile on the edge. If the joint is closed, the slats will go for each other. Another form is the joint without gaps, in this case products are installed back to back.

So what is the material to choose

the ceiling in the bathroom rack

Many buyers, once in the store building materials are lost, when deciding on what material to choose rails. Aluminum products are resistant to moisture and are resistant to temperature changes. They are almost not subject to corrosion. Aluminum panels successfully combine the properties of picky plastic and durable metal. This system is the most popular in the arrangement of the bathroom.

As for the rest of the ceiling, they are usually found in conditions of storage space. Steel is good because it provides insulation and acts as a great reflector. But this material is prone to corrosion, so you can use it only in dry rooms.

Universal trim are plastic panels that have become widespread. They can be installed not only in bath but also in the warehouse, and commercial premises. Such systems do not perceive the damp and do not require extra care.

Installation:

rack ceiling in a bathroom photo

If you want to perform the installation of suspended ceiling in the bathroom with your hands, you should know that such a system consists of a universal carrier of the bus, whichalso called a comb, the beam or stringer. Comes with an angular profile and an adjustable suspension.

Bus consists of a bar of galvanized steel, which is supplied with the fixings-slots. There are mounted strips and are mounted by snapping. The suspension consists of a rod and bracket. The latter is attached to the bus, whereas the rod is fixed to the main ceiling.

The distance to the suspension system is generally in the range from 5 to 12 see to Determine this parameter independently, and it will depend on the availability of communications. Installation of suspended ceiling in the bathroom provides for the need to prepare the following tools:

  • Drills;
  • Hammer;
  • Construction;
  • Scissors, metal;
  • Ruler and tape measure;
  • Screws;
  • Sharp knife
  • Marker dowels.

Installing rails and hangers

rack ceiling in a bathroom with their hands

To install rails, which will be located at the perimeter of the room, you must define place marker. Using a level mark is transferred on the perimeter of the room. You can then prepare corner profile, cutting it to size. The standard length of this element is equal to 3 m.

When cutting you should use the metal shears. Is applied to the wall of the guide profile, which should be in the place where you previously marked the line. Through openings in the element in the wall of the drilled return hole. They screwed the screws from the dowels.

The Profile is fixed with a step of 60 cm. Its smoothness is checked with a level. On the internal corners of the profile attached butt, while on the outside under an angle of 45 . Having looked at the photo of suspended ceilings in the bathrooms, you will be able to figure out which option suspended system is right for you. After selecting design you can proceed to installation. They are carried out according to a specific algorithm.

The next stage, installed hangers. The attachment of the tires are marked with tape. Stepping back from the wall about 40 cm, you have to put the first mark. The following will be located 100 cm the attachment of the suspensions is carried out with screws and plugs. For them, pre-drilled holes using a drill. The position of the plumb shall be checked for the level.

Installation of load-bearing tire and the ceiling

installation of suspended ceiling in the bathroom

Having looked at the photo of suspended ceiling in the bathrooms, you will be able to understand how to carry out the work. The next stage of the process, you can do the mounting of the bearing tires. Between traverses should ensure a distance of 1.2 m. the Tires will be perpendicular to the rails. The places of their fastening on the same level with the profile, which is mounted on the perimeter. Tires bolted to the hangers with a screwdriver. At this stage it is important to rule out any errors, in order to obtain a smooth design. This will depend on the appearance of the ceiling.

At a short distance the tire is attached to the basic ceiling, not suspended. Between the tire and the profile is left a distance of 1 cm If the tire is shorter, you should take out. For this purpose, the suspension is attached in the beginning of the next traverse. The second will be screwed back to back with the first.

Suspended ceiling in the bathroom not only looks impressive, but is ready to last a very long time after the completion of installation works. In the process of installation suspension systems are required to release the Reiki from the protective film and trim them by size. To do this, measure the distance between opposite walls and to take away from this value of about 0.5, see the figure measured on the rails. They are inserted into guides and locks into place along the length of the clip cross member.

If necessary, the height of the tire can be adjusted by changing the depth of screwing of the screws. This recommendation is correct, if the tire is fixed on the ceiling. Before install suspended ceiling in the bathroom with your hands, you should know that the last rail width may not be suitable. In this case it is cut. Along the entire length of the panel marks the desired distance. Using a knife and ruler you will be able to hold a straight line. The product needed to straighten and bend for as long as it will not break.

If the length is quite impressive, it is better to make cross cuts, and then break off the individual pieces. The trimmed product is mounted and fixed wooden struts. As an alternative solution for the floor pieces of the profile.

Installation of suspended ceiling in the bathroom involves the installation of baseboards. These decorative elements can give a neat finished appearance of the structure, concealing the gaps between the walls and hanging system. If the walls are uneven, you should purchase a skirting Board, which will make the design more smooth visually.

Value and description of set of roof rack

Purchasing a set of roof rack for your bathroom, you will free yourself from having to look for accessories and consumable items. Aluminum suspension system with a matte surface is 1 170 RUB. per square meter. The final cost will depend on the size of the room.

In order to eliminate waste, the manufacturer offers a kit for individual sizes. You get in the supply:

  • Rack;
  • Box;
  • Stringer;
  • The
  • Trim profile.

Width of the rack is 84 mm. It has rounded edges. The insert has a width of 16 mm. It was designed by the Italian designers. The set comes still a stringer, or comb, which is the element to insert strips in the installation process.

If you look at the photo of suspended ceiling in the bathroom, you will be able to understand that the system is installed using the starter U-shaped profile, which is also called the wall. It also comes complete. The whole structure after the purchase is fully ready to install.

Door-to-door system: installation guidelines

The lamp will be installed in the ceiling, depends on many things. Different devices differ in the shade light, as well as the size and power consumption. The ceilings are set at the height of the lamp, but to this value you should add about 1 cm

Light Fixtures for suspended ceilings in the bathroom should be installed given the fact that the room was quite light. This recommendation is especially true for spot lighting. For every two square meters you will need to install a single lamp.

Pitting instruments shall be located not randomly, but according to the principle of the composition or functional facilities. In the latter case, it is important to consider which area should be made more bright. Mounting rack ceiling in a bathroom, you need to emphasize another important advantage of this system, which is that the material is not afraid of high temperatures. This indicates the possibility of using the most powerful lamps, which create a bright atmosphere in the room. It is important to monitor the uniformity of light distribution.

Why choose led lamps

Led lights are durable and low temperature during operation. This is not able to boast of a fluorescent lamp. Led light will not heat the structure if it is made of plastic to facilitate its operation.

This device looks natural. However, the range of the diode is great. When installing equipment in the ceiling system often LEDs are used with daylight. When choosing a model it is important to consider life, but it is better to trust and expensive devices, as they will recover its cost over a long period of service. Installing suspended ceiling for the bathroom, you can not be afraid of the fact that led lighting will be exposed to moisture, it is resistant to water.

Features the hole for the light source

The Question is the hole for the light sources can make you worry not only never experienced, but the experienced Builder. The main thing - accurately to perform work. To mark the circumference using calipers, measure the diameter. However, you can make a template by putting it in the correct place. This solution is more convenient.

To cut a hole with scissors you need to drill a hole in the center of the marked circle. Otherwise, the rail may be deformed when it is staking. The whole circle is cut into thin slices, and then each part is broken off from the circle. For this purpose it is necessary to shake from side to side. The result will be able to get smooth holes for mounting of the lamp.

The Algorithm mounting of the led device in the rack ceiling

Before you install lighting, you should consider where they will be located. Mounting using the base surface, whereas in the grid of bore holes. The choice in favor LEDs because they are durable, have different brightness and high quality.

Such devices Is not much space, so to accommodate them even in a tight space. Before install suspended ceiling for bathroom, you have to hold the cables and lay them in the groove. In return, the latter can use other insulation, which is fixed on a rough surface. The rivers bore holes for the instruments, and after the installation of the ceiling in accordance with the location of the lamps. Making sure that lamps are in place holes to add to the last thermocole and install the necessary tools.

Lighting IP54

A ceiling for the bathroom can be equipped with lighting devices IP54, which represent high-end devices. Each digit in the marking has its own value. If we consider the advantages of such lamps, we can distinguish: efficiency, protection from dust, moisture and splashes, ease of installation, the ability to endure voltage fluctuations.

In conclusion

By Visiting the building materials market, you will be able to understand that the veneer is offered in a wide variety. However, for the bathroom it is necessary to select a material that will endure the negative effects of moisture and temperature changes. One of such decisions is suspended ceiling system of slats.


Article in other languages:

BE: https://tostpost.com/be/hatn-tul-nasc/1142-reechny-stol-dlya-vannay-sva-m-rukam-fota-nstrukcyya-pa-mantazhy.html

DE: https://tostpost.com/de/gem-tlichkeit/1139-rejetschnyj-die-decke-f-r-das-bad-mit-seinen-h-nden-foto-montageanleit.html

ES: https://tostpost.com/es/la-comodidad-del-hogar/1144-un-techo-para-el-cuarto-de-tus-manos-fotos-instrucciones-de-montaje.html

KK: https://tostpost.com/kk/domashniy-uyut/1142-reechnyy-t-bes-sh-n-vanna-z-oldarymen-foto-montazhdau-boyynsha-n-s-aul.html

PL: https://tostpost.com/pl/komfort-domu/1145-sufitu-szafy-do-azienki-w-asnymi-r-kami-zdj-cia-instrukcja-monta-u.html

PT: https://tostpost.com/pt/o-aconchego-do-lar/1142-a-fasquia-do-teto-para-casa-com-suas-pr-prias-m-os-a-foto-a-instru-o-d.html

TR: https://tostpost.com/tr/domashniy-uyut/1148-raf-tavan-banyo-i-in-kendi-elleriyle-foto-raf-montaj-talimat.html

UK: https://tostpost.com/uk/domashn-y-zatishok/1144-reykova-stelya-dlya-vanno-svo-mi-rukami-foto-nstrukc-ya-po-montazhu.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

How to increase water pressure in centralized water supply systems

How to increase water pressure in centralized water supply systems

you can Often meet a problem when the water pressure supplied centrally, insufficient to meet all the needs of the consumer. This applies to both urban and rural water supply systems. This problem may be related to the fact that t...

Air conditioner LG: instructions for remote control

Air conditioner LG: instructions for remote control

There are several types of control panels air conditioners: infrared and wired. The first transmit signal using an invisible beam. These devices are used to control equipment that is installed in the window openings, walls, etc. T...

Red spots on the leaves of currant - cause for concern

Red spots on the leaves of currant - cause for concern

Any change in the shape and color of leaves currant, the appearance of stains on them should alert even the most inexperienced gardener. After all, this is evidence of some disease, and the sooner the cancer is detected and approp...

How to make a newspaper for the prom in several ways

How to make a newspaper for the prom in several ways

Prom night in school, kindergarten and University – the kind of moment that only happens once in a lifetime. For many years, you have talked, studied, did each other little dirty tricks or gave gifts. Everyone has experience...

The gland seal of the pump. Design of shaft seal

The gland seal of the pump. Design of shaft seal

In the process, the pump having fluid loss. Typically, this occurs in the place of attaching it to the pipeline. To avoid it, you need to use the gland seal of the pump. This is what the fixture will be discussed.oil seal at the p...

Project of prefabricated houses using canadian technology

Project of prefabricated houses using canadian technology

Canadian home constructed of structural insulated panels, in recent time has acquired a huge popularity. They cost not too expensive and can be erected in just a couple of days. The advantages of buildings of this type refers prim...