Grease tsiatim: characteristics, application, properties

Date:

2018-03-25 01:29:15

Views:

638

Rating:

1Like 0Dislike

Share:

Table of contents:

Today, lubricants are used quite widely, and the diversity of the product market is sufficiently large. One of the good domestic products was the grease tsiatim.

General information

One thing Worth mentioning is that the varieties of fuel quite a lot, and in order to simplify the choice was created the classification of these substances. To date, there are three of them look different from each other in composition, consistency, as well as the use. Also worth mentioning that the consistency of the lubricant can be divided also into three types: plastic, solid, semi-solid. Also important is the fact that they are separated by areas of application. Exist:

  • Anti-friction lubricants;
  • Rustproof types of grease;
  • Seal;
  • Cable car.

grease tsiatim

Another important factor is the temperature of the working medium of the composition. Because, in some units the figure comes up to 200-350 degrees centigrade and above, it is necessary to use heat-resistant types. One such species is the grease tsiatim.

Heat-Resistant grease

Lubrication tsiatim name refers to a group of heat-resistant plastic substances. In view of such tool is a synthetic oil that is artificially thickened with complex calcium soap with addition of antioxidant additives. The purpose of the grease tsiatim - a lubrication of rolling bearings of electric machines, control systems and devices, frequency of rotation reaches 10 000 rpm.min. in addition, the composition is used for aggregate bearings installed on the aircraft. Another area of application is the friction and mating surface of materials metal-metal and metal-rubber, which temperature ranges from -60 to +150 degrees Celsius.

Recommended

Staff evaluation: system and methods

Staff evaluation: system and methods

Personnel Assessment allows you to identify how competent the employees involved in the enterprise, and it is the performance of their work – the most significant factor affecting the efficiency of the company. To clarify the impact of performa...

How to start your own business: important aspects.

How to start your own business: important aspects.

Many people, tired of working for someone else, are increasingly thinking about how to start your own business. Someone wants to open a salon, someone store, and someone enough and vegetable stalls. Before you throw in the pool with his head, it is i...

business activities. its essence and basic functions

Business activities. its essence and basic functions

The Entrepreneurial activity of the citizen – is undertaken at your own risk and independent activity, which aims to systematically profit through the sale of works, goods, services, use of the property. The citizen engaged in such activities, ...

grease tsiatim application

Description grease

It Should be noted that the grease tsiatim developed by the Central Institute of aviation fuels and oils. A highly praised this means, and argue that the use of this substance has many possibilities. However, in practice it turned out that the scope of this particular brand, as well as its specificity have a fairly narrow characteristics. In order to determine whether it's right or not, is to delve into the study of physico-chemical and performance properties of the lubricant tsiatim.

grease ciatim 201

It is Important to understand that all the features of this grease is due to the physico-chemical composition of the substance. The composition of the raw material is silicone fluid. In addition, the grease contains a thickener in the form of a complex calcium soap. The opportunity to work in a wide temperature range is due to the fact that the composition is silicone fluid. The maximum operation temperature is from -60 (or below) to +300 degrees Celsius. This factor affects what the possibility of using the lubricant extends from various cryogenic devices to high-temperature equipment. It is also important that the silicone fluid vaporizes poorly, and this makes possible its use in a vacuum. Many thanks to these qualities apply grease tsiatim spread to aerospace engineering.

Structure and features

If silicone fluid adds a lot of cruise properties, such additive as a thickener in Soaps, strongly precipitates these qualities, as has many organic options. Dropping temperature, which is around 200 degrees Celsius, reduces the maximum possible working temperature range up to 150 degrees. But because of the weak properties at low temperatures the efficiency of the lubricant ciatim-221 is greatly reduced. Especially when used at temperatures lower than 20-30 degrees. It would seem that the thickening agent has excellent resistance to moisture, but at the same time this advantage is greatly offset by the fact that there is a high hygroscopicity. In other words, the grease will absorb moisture from the ambient air, which will affect the initial consistency.

grease tsiatim characteristics

Production and operations

Currently, it is difficult to say why the characteristics of the lubricant tsiatim such unbalanced. However, the most probable hypothesis concludes that at the turn of the 80-ies it was difficult to create something better. And today it turns out that this kind of lubricant is manufactured according to GOST 9433-80, which was approved in 1980. However, despite these physical-chemical qualities, the most important indicator will be the operational characteristics of a substance.

grease tsiatim characteristics application

One of the most important parameters of such a lubricant is low effective viscosity of the substance, which manifests itself at the level of 800 PA/s at temperatures of -50O. This index indicates the possibility of using lubrication in friction, where the number of revolutions reaches 10 000 rpm.min. is Also important that the minimum possible operating temperature is still set as -60 degrees Celsius.

Properties

Another important characteristic of the lubricant tsiatim - is its chemical inertness in relation tosubstances such as a hydrocarbon elastomer, a polymer. The principle of dissolving such in such connections do not work, as silicone fluid is not a hydrocarbon compound. It is worth noting that this fundamental property allows the use of grease in such friction pairs as metal-rubber, metal-plastic, plastic-plastic, etc.

grease tsiatim 221

But it is important to note, with such qualities to use this lubricant in the friction pair metal-on-metal impossible. Tribological parameters such raw materials is too weak. They are not intended for usage in conventional steel bearings. This is because due to their physico-chemical properties of the lubricant cannot be applied in a friction pair metal-on-metal, as it is not able to provide the necessary wear protection. It should be noted that to create a suitable tribosystem of this lubrication with the addition of any tribopressed also will not work. This is due to the fact that silicone fluid is not able to form a film which will separate the details and protect from friction.

Tsiatim-201

If 221 lubricant is clear, then there is another product lubricant 201. Tsiatim-201 is the instrument antifriction substance, possessing qualities such as resistance to frost, refractoriness, resistance. This tool is used for the lubrication of lightly loaded nodes of rolling friction and sliding.

The Production of such material is based on low-viscosity petroleum oil thickened with lithium stearate, and added anti-oxidation additive. The maximum possible operating temperature of a given substance are in the range from -60 to +90 degrees Celsius.

lubrication tsiatim analogues

The advantages of this lubricant include the following features:

  • Low friction characteristics of this lubricant can improve the efficiency of equipment and significantly increase its service life;
  • Operating temperature range is quite wide, allowing you to use the substance year round but strong resistance to frost makes it possible to use lubrication even in weather conditions of the far North;
  • Water resistance raw materials makes it possible to use it in open, as well as untight devices.

Counterparts

Today there are a variety of import counterparts of the lubricant tsiatim. Such substances include Mobiltemp SHC 32, and O-Grease. Such lubricants are manufactured by companies Mobil and Teobil respectively. A analogues which can replace the lubricant ciatim-201.

To replace the grease 221, you can use such imported counterpart, as HUSKEY HVS-100 Silicone Grease. However, the replacement of the domestic fuel and lubricant necessary to accurately understand the operational and physico-chemical characteristics of both brands. As incorrectly selected the analogue may simply not be appropriate for use in specific conditions. A lack of lubrication in a variety of devices greatly reduces their protection against wear, friction, and greatly degrades their performance. In the result the total period of operation of such machines is also reduced.


Article in other languages:

AR: https://tostpost.com/ar/business/4902-tsiatim.html

BE: https://tostpost.com/be/b-znes/8728-zmazka-ciatim-haraktarystyk-prymyanenne-lasc-vasc.html

DE: https://tostpost.com/de/business/8729-schmierung-ciatim-eigenschaften-anwendung-eigenschaften.html

ES: https://tostpost.com/es/negocio/8735-la-grasa-ciatim-caracter-sticas-uso-propiedades.html

HI: https://tostpost.com/hi/business/4904-tsiatim.html

JA: https://tostpost.com/ja/business/4902-tsiatim.html

KK: https://tostpost.com/kk/biznes/8731-smazka-ciatim-sipattamalary-oldanu-asietter.html

PL: https://tostpost.com/pl/biznes/8731-smar-ciatim-charakterystyka-zastosowanie-w-a-ciwo-ci.html

PT: https://tostpost.com/pt/neg-cios/8727-lubrifica-o-ciatim-caracter-sticas-usos-propriedades.html

TR: https://tostpost.com/tr/business/8737-ya-lama-ciatim-zellikleri-kullan-m-zellikleri.html

UK: https://tostpost.com/uk/b-znes/8733-mastilo-ciatim-harakteristiki-zastosuvannya-vlastivost.html

ZH: https://tostpost.com/zh/business/5332-tsiatim.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

As pasynkovat eggplant in open field and greenhouse?

As pasynkovat eggplant in open field and greenhouse?

Gardeners know how important it is to pasynkovat and to shape tomatoes, cucumbers and peppers. But should pasynkovat eggplant? "Purple" is a rather capricious plant, which, without giving them proper attention will make a good cro...

Cover crops: when to plant phacelia

Cover crops: when to plant phacelia

Phacelia – annual, excellent bee plant, as well as green manure, i.e. it can be used to improve the quality of the soil. In addition, the planting of this plant helps to rid the area from such pests as nematodes and wireworm...

Milking machines for cows: type, device characteristics

Milking machines for cows: type, device characteristics

the Popularity of agriculture among the population is again growing, and livestock keeping for many people in the private sector is the norm. Along with this and to buy a home fresh milk becomes easier, due to the content of priva...

Magnesium sulphate (fertilizer): the instructions for use, price

Magnesium sulphate (fertilizer): the instructions for use, price

For a quick and proper development of vegetable and garden plants need various types of micro - and macronutrients. In addition to the nitrogen, phosphorus and potassium, plants need to obtain from the soil, and magnesium. To achi...

Rostov-na-Donu: shopping malls of the city

Rostov-na-Donu: shopping malls of the city

Rostov-on-don is considered the largest city in the South of Russia. Since 2000, he has acquired the status of administrative center of southern Federal district. Rostov-on-don is among the ten largest cities in Russia by populati...

Specialization of production

Specialization of production

Specialization of production, the social division of labor, expressed in the separation of the old branches of production, of workers within the industry and creating new industries. Its deepening is manifested by deepening of the...