Infrared heater: description and features

About 92% of heat energy, which radiates infrared heaters are directed to the surface of objects entering the area of radiation. By the way, this could include not only objects but also living organisms, such as humans. As for air, it is heated only to the extent of 8%. Radiation fall on surfaces, objects, walls and floors, warming them. According to this principle, and creates a primary heat. Heated objects start to give the accumulated heat to the air.

An overview of the features of infrared heaters: capacity

If you want to choose an infrared heater, it is important to pay attention to the most important feature – power. This setting is chosen from the algorithm 1 kW power unit for every 10 m². If you are planning to use this unit as the primary heat source, it is desirable to choose a device with a reserve power to compensate for possible heat losses, which go through doors, Windows and walls.

In the market there are models, capacity of which is 300 watts. They can be used for temporary local heating of garages, cellars and other outbuildings. For more effective operation of the best such devices to be placed closer to the person. Infrared heater imported most frequently designed for power supply 240V, so when you connect to a standard network device will not operate at full capacity. At this factor you should pay attention to when buying. Heaters of this type can be electric or gas, the latter was optimal for heating large areas, this may include terraces and porches.

Source work

Infrared heater gas type can have a source for the functioning of electric or liquefied gas. The power of these heaters starts from the figure of 1.5 kW. Purchasing a gas heater of the infrared type, you can count on direct or indirect heating. In the first case, the air required for the burner will come from space and return with the product of combustion. Therefore, when installing such a device is necessary to ensure an effective ventilation system. When you buy the device with indirect heating will require a system for removing gases.

If you are interested in gas infrared heater reviews, it is recommended to read. Consumers claim that these devices work silently and have a well-thought-out security system. The units have two sensors, one of which is responsible for the oxygen level in the room, and when deviation from the norm disables the heater. The second disables the device in the fall or tilt of the device. It is a great protection from fire of the premises. The positive features of such devices can be attributed to the uniformity and speed of heating, environmental safety, cost effectiveness and compactness. However, before buying a gas heater need to know if in the room to use this type of equipment.

Recommended

Staff evaluation: system and methods

Personnel Assessment allows you to identify how competent the employees involved in the enterprise, and it is the performance of their work – the most significant factor affecting the efficiency of the company. To clarify the impact of performa...

How to start your own business: important aspects.

Many people, tired of working for someone else, are increasingly thinking about how to start your own business. Someone wants to open a salon, someone store, and someone enough and vegetable stalls. Before you throw in the pool with his head, it is i...

Business activities. its essence and basic functions

The Entrepreneurial activity of the citizen – is undertaken at your own risk and independent activity, which aims to systematically profit through the sale of works, goods, services, use of the property. The citizen engaged in such activities, ...

Electric infrared Heaters are available with power range of 1.5 kW, so they can be used for domestic purposes. Spiral heater runs on quartz basis.

The description of the different types of infrared heaters

The market you can find infrared heaters ceiling, wall, outdoor and film. In the first case we are talking about devices that are bulky in size, but this does not complicate their installation. These units are manufactured with a remote control, which is very convenient in operation. In addition to the ceiling, ceiling infrared devices can be installed in a corner or on the wall.

Wall-mounted

Infrared heaters heating can be wall mounted, in this case, they have different designs and are similar in appearance with the Central heating pipes. To install such devices on the outside wall or in a niche under the window. In the kit it comes with remote control and programmable thermostat.

Reviews about outdoor infrared heaters

The Most mobile, according to users, are considered to be outdoor devices, they can be easily moved from place to place. Large models are equipped with handles and castors, power cord and a compartment for him. According to customers, almost all models have automatic shut-off function and overheating protection. However, if you want to present the thermostat, it should pay attention, as not all models are equipped with them.

Reviews film species

The Infrared heater can be presented in film form. According to the buyers to install such a device it is possible for finishing of walls, floor or ceiling. Weight usually does not exceed 500 g, and use the device in any room, except for explosive andfire. To ensure safe operation, you should buy a thermostat. As the advantages of all the varieties of infrared heaters is quite long lifetime which is 25 years or more.

The Choice between an infrared heater and convector

Quite often modern consumers today, don't know what to choose – infrared heater or convector. Better yet, you will be able to understand after reading my article. It is recognized that both of these device are popular for suburban real estate. Electric heaters proved themselves appeared on the market since the 90s of the last century. They are easy to use and simple guidance.

Infrared heaters appeared only 5 years ago, today they are representatives of the latest generation of energy-saving devices. If you can't decide what to choose – convector or radiant heater, you should pay attention to the fact that the first kind of device heats the room by continuous air movement. They arise due to the difference of temperatures in separate areas of the room. At the same time heats a layer of air over others, and provides a relatively uniform temperature.

The disadvantage of such devices it is possible to allocate the creation of a comfortable temperature only in a certain part of the room. So, being in search of the answer to the question: "Infrared heater or convector – which is better?", you will be able to take the right decision only when you are familiar with all the features of these devices. For example, infrared devices heat the room, radiating heat flows with a clear focus. Therefore, for the shortest period of time, after 10 minutes, the area covered by the rays, will find a comfortable temperature. Electricity costs have a minor, especially when compared to convectors.

Electric heaters quite often win also in the question that they can fit almost any interior. Most often these units are installed in a wall niche or on special legs to make the unit mobile. If you pondered the question about what's best – a convection heater or an infrared heater, you should pay attention to the fact that the last unit will work not only due to flow of air but heat objects. In addition, infrared heaters can be installed even in the bathroom. When placed on the surface of the ceiling, then the room will be heated floors and tile. Experts advise to choose the heaters, if you want to build in the country an Autonomous heating system.

Summary

If to do conclusions, it can be noted that heaters are used for permanent heating, whereas infrared heaters are optimally suited only for certain areas where there is a need to create a region of increased thermal comfort.

Conclusion

In addressing the issue of accommodation, it can be noted that the infrared products suggest the possibility of greater diversity, but among the heaters you can find models that are aimed at not only on the walls but on the floor. Modern design solutions allow you to more properly fit the convectors or an entire system of them. But, whatever it was, which is better – the heater or infrared heater - you must decide for yourself.