How to milk cows? Technology and hardware manual milking

Date:

2020-04-29 11:20:09

Views:

525

Rating:

1Like 0Dislike

Share:

Table of contents:

Each of us from childhood familiar with the taste of milk. However, not all city dwellers know how to milk the cows. In fact it is quite difficult and time-consuming process that requires certain skills. In this article you will learn about the basic intricacies of manual and hardware technologies.

The Preparatory phase

Before you milk cows, you need to perform some simple manipulations. This will allow the animals to prepare for the process itself, will save you time and increase the volume of milk received.

how to milk the cows

Before you start are milking-off, you should knead the udder massaged. It is advisable to start with the top, gradually moving to his nipples. This massage is an excellent preventive tool that allows you to avoid mastitis. In addition, such actions contribute to stimulation of the ovaries, which in turn improves fertility. Nulliparous specimens is recommended to massage a few months prior to calving, and to terminate it within 25 to 30 days.

How to milk a cow by hand?

First of all you need to grease your palms with vaseline. This will minimize friction and the associated discomfort. Taking in each hand a pacifier, grab its base with thumb and forefinger. These actions block the access of milk back to the udder.

how to milk a cow

You can then start alternately to clamp the middle, ring finger and little finger. Experienced milkers are able to carry about hundreds of such movements per minute. If you do everything right, then the udder will begin to get milk. You can swap the front first and then rear nipples. And you can capture them diagonally.

Recommended

Staff evaluation: system and methods

Staff evaluation: system and methods

Personnel Assessment allows you to identify how competent the employees involved in the enterprise, and it is the performance of their work – the most significant factor affecting the efficiency of the company. To clarify the impact of performa...

How to start your own business: important aspects.

How to start your own business: important aspects.

Many people, tired of working for someone else, are increasingly thinking about how to start your own business. Someone wants to open a salon, someone store, and someone enough and vegetable stalls. Before you throw in the pool with his head, it is i...

business activities. its essence and basic functions

Business activities. its essence and basic functions

The Entrepreneurial activity of the citizen – is undertaken at your own risk and independent activity, which aims to systematically profit through the sale of works, goods, services, use of the property. The citizen engaged in such activities, ...

Before milking the cows, under the pre-rubbed the udder fills the bucket. The animal is not accidentally knocked over capacity, it is recommended to fix the feet. To ensure that the animal is completely healthy, you first need sdoit small amount of milk in a separate container. Blood clots indicate that the animal has mastitis. At the end of the process you need to lubricate the teats of cattle with a special cream or melted butter. This will soften the skin and avoid cracks.

How to milk a cow milking machine?

In addition to manual methods, there is also a machine technology. If the first option is suitable for small private farms, which only a few animals, a second-best for large-scale farms, which contains more than a dozen individuals.

how to milk a cow by hand

By analogy with the previous method, before you can milk cows, wash and massage their udders. Then on the nipples to put on the teat cups, the common people known as breast pumps, and turn on the machine. This is a fairly fast manipulation, allowing you to save a lot of time and effort.

At the end of the process you should see the udder from breast pumps and to rinse the equipment. This procedure can be repeated two or three times a day.

Process Optimization

Understanding how to correctly milk a cow, you need to think about the organization of this process. This is especially true of large farms. Today, there are two basic ways.

how to milk a cow with a milking machine

In the first case, employees need to work with two milking machines. This allows you to promptly handle all operations for receiving milk. In the second case, the process occurs in a specially designated room. There is given a whole herd. Subsequently, the animals are divided into small groups. It's important to consider the magnitude of the milk yield, the speed of impact of milk, lactation and pregnancy.

Control over the automated process

Understanding how to correctly milk a cow by hand and using milking machine, it is important to understand how to follow this procedure. If a manual process is more or less clear, the automated you will have to pay a little more attention.

how to milk a cow by hand

The Control is carried out through a transparent viewing cones of teat cups or special hoses. If the animal for some reason, suddenly ceased to give milk, it is necessary it is easy to massage the udder to complete the renewal process. This should be done without removing the milking cups.

Sometimes breast pumps can fall off the nipples. In this case, you need to disconnect the device from the vacuum, wash the fallen glass back in his seat and continue the process. To avoid tipping the milking system should be mounted closer to the front limbs of the cow.

Useful tips

An experienced milkmaid knows that in this difficult case is important not only proper technique but also good for the animal. Before you begin the process, wash the hands and put on clean gown. It is also desirable to offer the beast some treats, scratch her neck and let her sniff you. Established contacts will make the cow more calm and docile.

One caveat milking is that the animal must see that he is approached by people. Cows are pretty skittish, soapproach them from the front is recommended. Juveniles in the first few times it is desirable to bind, until they get used to everything. Cows usually adapt quickly, and the need for that control disappears by itself.

One of the basic conditions of care for dairy animals is a regular udder massage that mimics the action of a calf. It helps to prevent the development of many diseases, including mastitis.


Article in other languages:

AR: https://tostpost.com/ar/business/22084-how-to-milk-cows-technology-and-hardware-manual-milking.html

BE: https://tostpost.com/be/b-znes/39559-yak-da-c-karo-tehnalog-ya-ruchnoy-aparatnay-doyk.html

DE: https://tostpost.com/de/business/39083-wie-die-k-he-zu-melken-technologie-manuelle-und-hardware-melken.html

ES: https://tostpost.com/es/centro-de/38853-como-orde-ar-vacas-la-tecnolog-a-de-la-mano-de-hardware-y-puso-nervios.html

HI: https://tostpost.com/hi/business/23702-how-to-milk-cows-technology-and-hardware-manual-milking.html

JA: https://tostpost.com/ja/business/21667-how-to-milk-cows-technology-and-hardware-manual-milking.html

KK: https://tostpost.com/kk/biznes/39967-alay-doit-siyr-tehnologiyasy-olmen-zh-ne-apparatty-sauyn.html

PL: https://tostpost.com/pl/biznes/41740-jak-doi-krowy-technologia-r-cznego-i-sprz-tu-udoju.html

PT: https://tostpost.com/pt/neg-cios/41369-como-ordenhar-as-vacas-a-tecnologia-manual-e-hardware-doyki.html

TR: https://tostpost.com/tr/business/36512-nas-l-bir-ine-i-teknolojisi-el-ve-donan-m-doyki.html

UK: https://tostpost.com/uk/b-znes/40428-yak-do-ti-kor-v-tehnolog-ya-ruchnogo-aparatno-do-nnya.html

ZH: https://tostpost.com/zh/business/28364-how-to-milk-cows-technology-and-hardware-manual-milking.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Machine for the tree trimming. Woodworking equipment

Machine for the tree trimming. Woodworking equipment

Trimming machines used by professional builders for wood processing. Modern versions are available with adjustable spindle lubrication. All this allows you to more accurately control the angle of cut. Some modifications are made w...

The Pyaterochka stores in Moscow: addresses, opening hours, discounts and promotions

The Pyaterochka stores in Moscow: addresses, opening hours, discounts and promotions

one of the most recognizable and largest retail brands include Russia «Pyaterochka». This Corporation, which began its presence in the retail market in St. Petersburg today is actively developing in Moscow and many oth...

Meat processing company, meat-packing plants of Russia: rating, products

Meat processing company, meat-packing plants of Russia: rating, products

Today, a huge number of enterprises engaged in meat processing. Moreover, some known throughout the country, and some – only on the territory of the region. We propose to evaluate the powerful performance of meat processing ...

Means for removing rust from metal: basic methods and materials

Means for removing rust from metal: basic methods and materials

called Rust appearing on the metal surface in contact with air and water to the oxide. Finding for iron, steel, brass, etc. items with reddish-brown spots, the measures to be taken immediately. The fact that the progressing oxidat...

The unified state automated system (EGAIS)

The unified state automated system (EGAIS) "Accounting of wood and transactions with it". The Internet portal USAIS

the Mechanisms of interaction of business and authorities in Russia are gradually improved — including in the aspect of use of channels of online communication between business entities and regulators. So, Russia has activel...

The nitric acid production industry: technology, stages, characteristics

The nitric acid production industry: technology, stages, characteristics

Nitric acid — among the most popular types of industrial raw materials. Its production can be carried out by different methods — depending on, which varieties of acid must be supplied to the customer. What is the essen...