Grease for calipers

Date:

2019-05-02 19:00:18

Views:

468

Rating:

1Like 0Dislike

Share:

Table of contents:

The Car in the twenty-first century have long since ceased to be merely a means of transportation. Now the presence of a luxurious vehicle indicates the high status of its owner.

Today's cars are equipped with advanced technologies. Competition in the world automobile industry became very resistant. With the increase in demand for cars worldwide, designers and engineers of every automotive brand are seeking to make a unique "iron horse".

The Demand for used cars is increasing, and if you buy a new car the customer receives the warranty period or service, then buying a used car, mainly all the problems are made at their own expense. It is very important to frequently test the vehicle in the salons service mostly need to check the chassis and brake system.

The Whole brake system itself is simple, the problems generally happen in hoses. Light cracks eventually become wide and may result in consequences that may affect the safety of the motorist. Brake hoses and replace them are not so expensive.

The Following function relating the brake system is brake pad replacement. So how to change the brake pads have not so often, it is recommended each time you replace them to use a high quality grease. It is unlikely that the driver will be the news, how important is the lubricant for the calipers.

Many modern machines are equipped with sensors that show the onboard computer the status of the brake system. It is recommended to be replaced using the factory, but the lack of funds can change over budget, but high-quality models of brake pads.

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

Also Recommended are the details of German and Japanese production. Usually under normal riding they serve 20-30 thousand kilometers, if the car is operated on roads, the Shoe good quality will serve you and up to 45-50 thousand kilometers.

Professionals in one voice say that the grease for the caliper should be held in a suspended mode, securing them to the strut spring or control arm (depends on the brand of the machine itself)

It is Necessary and very important to change the pads on time, since further driving they will spoil and brake discs.

The process of replacing them is very simple, so many perform it yourself in your garage. What is it? Will try to explain the whole simple process of lubrication.

The First thing after removing the wheel and old pads you need to clean the brake plate, springs and contacts from contamination. Equally important is the lubrication of the guides of the calipers, which are the ends from the pads. The question arises, what should be the grease, and what properties it must have to work more effectively? Since the friction of all the parts reach the extreme temperatures, it is necessary to take lubrication, which will not lose its properties even at a high degree.

It turns Out that the grease for the caliper needs to be high temperature. Since the caliper can heat up very strongly, it is strongly recommended to choose high temperature, high quality grease, because the repair and maintenance of the entire braking system - the primary task for safe driving.

If the toes of the guides of the calipers is rust, it is necessary to eliminate them. Grease for calipers should only be used on the cleaned surface.

To easy to put the ends of the pads into place, it is a good idea to sand down. If in doubt of the abilities necessary to turn to the experts and be sure to replace the pads and grease the caliper for maintenance. In any case, it is important to use high quality and “correct” grease for the caliper.

I would Like to mention that the grease for the calipers and replacing pads is a simple process. If a replacement pad is not done on time, brake pads RUB against the coated parts, resulting in a lip on the brake discs. In this case, it is necessary to change the brake Shoe or carve it, if the collar is small.


Article in other languages:

AR: https://tostpost.com/ar/cars/16865-grease-for-calipers.html

BE: https://tostpost.com/be/a-tamab-l/32600-zmazka-dlya-supportov.html

DE: https://tostpost.com/de/autos/32271-schmierfett-f-r-ger-tetr-ger.html

ES: https://tostpost.com/es/coches/32147-grasa-para-pinzas.html

HI: https://tostpost.com/hi/cars/18502-grease-for-calipers.html

JA: https://tostpost.com/ja/cars/16550-grease-for-calipers.html

KK: https://tostpost.com/kk/avtomobil-der/32933-maylau-sh-n-supportov.html

PL: https://tostpost.com/pl/samochody/33969-smar-do-zacisk-w.html

PT: https://tostpost.com/pt/carros/33755-graxa-para-pin-as-de.html

TR: https://tostpost.com/tr/arabalar/29345-ya-lama-i-in-kaliperleri.html

UK: https://tostpost.com/uk/avtomob-l/33139-mastilo-dlya-suport-v.html

ZH: https://tostpost.com/zh/cars/10233-grease-for-calipers.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

The clutch in the car

The clutch in the car

Clutch is designed for short-term separation of the engine and transmission for the period of the shift, facilitating a smooth standstill. If we consider the mechanism of the disk clutch, then it is due to the friction forces that...

The car

The car "Niva": the owner reviews

in Soviet times the domestic auto industry has released the SUV «Lada Niva", which instantly won the hearts of motorists. This vehicle is even brought to the world market. «Lada Niva» and still faithfully se...

The noiseless locks as an alternative to the factory solutions

The noiseless locks as an alternative to the factory solutions

I Must admit that while the domestic auto industry uncompetitive. Sadly, but terrible drawbacks of cars of the Russian production is forced to think about the advisability of purchasing a car of this segment. However, in the absen...

LEDs dimensions: description and features

LEDs dimensions: description and features

the correct choice of lighting determines the safety of the driver, as well as all other participants of road traffic. For this reason, the choice of lamps for headlights fit with the utmost delicacy. Today got more and more popul...

The carburetor DAAZ

The carburetor DAAZ

If you are the owner of VAZ "Classics" (and from 2101 to 2107), you do not just have to solve the question of raising the vehicle dynamics or the reduction in fuel consumption. If the engine is called the heart of the car, then th...

What spoiler is on the car? Its advantages and disadvantages

What spoiler is on the car? Its advantages and disadvantages

car Tuning is now in Vogue. Besides the different skirts and other fashion items popular spoilers on the car. Some drivers perceive them as design elements, while others believe that this element of the body provides some advantag...