Brake fluid DOT-4. Brake fluid "Castrol" DOT 4: drivers

Date:

2019-07-30 21:20:39

Views:

521

Rating:

1Like 0Dislike

Share:

Table of contents:

In the braking systems of the disc type most vehicles poured brake fluid DOT 4 is one of the most popular and common among peers. The main differences of these agents are considered to be the boiling temperature, composition and the ability to absorb moisture vapors. Category DOT 4 is considered the highest quality and versatile. When compared with DOT 3, it absorbs significantly less water and keeps the temperature of the boiling point constant for a long time. Such features of the composition allow extended use.

Types of brake fluids

The Systematization of the brake compounds DOT was sformirovan amerikanskim Department of transportation. Safety standards FMVSS was used as a base to create these standards. Translating the reduction in the DOT denotes “the Department for transport security”. Included in the composition of the substance, moisture binding, are indicated by the numeral 4. Certification GOST such agents are not.

brake fluid dot 4

Since DOT 4 is not the product of petroleum refining, and marking of her match – the octagonal shape yellow bordered black line. At the center of the figure is a diagram of the braking system. Such symbol, diagonally crossed out, suggests that this composition is poured into the system is impossible.

The boiling point and the viscosity of the dry and filled with the water liquid - criteria, which are divided into the types of brake compounds. The basic Foundation DOT 3 and DOT 4 are the polyglycols, however DOT 5 is based on silicone, why these categories are not mixed together. To create categories of fluids DOT 3 and DOT 4 are the same substance, so they can be mixed and interchangeable.

Marking and part of the brake fluid DOT 4

Brake fluid DOT 4 in the database contains linear polyethers and polyalkylene glycols. In most cases, in the production of such formulations use polyethylene glycol, but on the packaging it is often listed under a different name, since it takes into account a variety of additives and liquid polymer.

In contrast to predecessor DOT 3, DOT 4 fluid in its composition contains special additives – for example, borates. They associate enters the material from air during the operation of the water.

In the sports cars class, uses brake fluid DOT 5.1, obtained by adding special additives and additives in the fluid of the DOT 4 standard.

Compatibility brake fluid DOT 4

For many motorists one of the most urgent and pressing issues remains the work of brake fluids of different grades and categories. Specialists usually suggest to use compositions of famous brands – such as brake fluid "Castrol" or the brake fluid Bosch DOT 4. Must necessarily comply with the marking composition.

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

In the Russian market of automotive products presents a huge number of different brake fluids. Mixing them together is not advised, however in an emergency it can be done, but would be guided by certain rules.

compatibility brake fluid dot 4

Brake fluid DOT 4 can be mixed with such analogues as DOT 3, DOT 4.5, DOT 5.1. Dilute its agents silicone-based like DOT 5 and DOT 5.1 (ABS) is prohibited.

Brake fluid DOT 4 - specifications

The Main physico-chemical parameters of the compounds that affect their quality, are:

  • Strength;
  • Boiling point;
  • The ability to absorb moisture vapors;
  • Corrosion resistance.

According to the requirements of the standard DOT 4 fluids, the temperature of boiling should not be below 250 OC. This figure can be reduced to the 165 OWith those of liquids, which absorb moisture from the environment in the total number to 3.5%.

Viscosity is measured using viscometer. This parameter should not exceed 750 mm2/s. In practice, one of the main properties is the viscosity, while the density of the brake fluid is almost never taken into account.

Resistance fluid DOT 4 to corrosion depends on its level of acidity. It is normal to measure within pH 7,0-11,5 units.

Lifetime brake fluid

Depending on the additive, hygroscopic and conditions of work can change the life of the agent. For example, low-quality brake parts can change the characteristics of brake fluid that affects its functions and working online. For this reason brake fluid is changed every 2-2. 5 years.

Why DOT 4?

Brake fluid DOT 4 offers the following advantages that it is one of the most popular in the world:

  • Reliability;
  • Affordable prices;
  • Wide range of temperatures at which it can be used.

Expensive DOT 5.1 is almost never used by motorists as it is more expensive, but in terms of functionality it is no different from DOT 4. Tests conducted by professionals and Amateurs, show that the gold standard is brake fluid DOT 4. Feedbacks on composition, confirm its reliability and high quality combined with reasonable price.

Temperaturea boil

brake fluid dot 4 specifications

The Kinetic energy of the vehicle during braking transformered into heat. Pads heated, transfer it to the pistons and the caliper body, which already heats the brake fluid. On this basis, put forward one requirement for it: high boiling point, to avoid a “failure” of the brake pedal. The high speed of modern cars has led to the fact that the old types of such compositions no longer cope with their functions, and they replaced brake fluid DOT 4. «Toyota», one of the most respected automotive companies in the world, advises to use such compositions.

Corrosion Resistance

The Second requirement is minimum corrosiveness. The oxidation of the metal of the pistons not the worst thing that can happen is much more dangerous than the corrosion in the brake lines. To ensure the highest boiling point brake fluid is made possible only through the use of polietilenglikoli framework that has a high level of hygroscopicity. Because of this, the compositions of DOT 4 is stored only in tightly closed containers. Fluid that has accumulated a large amount of water, not only speeds up the corrosion in the brake system, but boils at a much lower temperature. It is often found in motorcycles and cars of the sports class: “failures” brakes during aggressive and fast driving can cause serious accidents.

Lubricity

Good lubricating properties – this is the third requirement for brake fluids. Such features help to reduce wear of the hydraulic unit ABS and a cuff of the cylinder of the brake system. The DOT 4 standard for these parameters is slightly inferior to the new DOT 5, while the latter has a higher boiling point and a lower level of water absorption, allowing you to use it for a quick drive. Fluid DOT 5.1 was developed for vehicles equipped with an antilock braking system. Means the introduction into glycolic basis of a small number of anti-friction additives. For most vehicles it is desirable to use fluids of this class, as they are compatible with seals that are designed to previous standards of liquids.

High viscosity

High viscosity – the fourth requirement for brake fluids. Maintaining the viscosity of the fluid allows the brake system to work normally in any temperature environment. This parameter is most important for cars with ABS. After all, the solidification fluid can cause failure of hydraulic unit on those vehicles in which exchange rate stabilization is tied to the abs system. This can be attributed to modern crossovers: failures of the system of distribution of traction will cause bad drivability.

Brake fluid Mobil

The Composition recommended by the manufacturer for use in drum, disc and antipropulsives brake systems installed on vehicles of average power.

Mobil brake fluid dot 4

Brake fluid Mobil DOT 4 is used in accordance with the following guidelines:

  • Filled only in the concentrated form of new packaging or tightly closed.
  • Immediately after use, the bottle must be kept tightly closed, as the composition absorbs environmental moisture, which affects its performance period.
  • Flushed the brake fluid cannot be reused.
  • Shed structure immediately removed because it can corrode body paint.
  • Time to replace the brake fluid – every two years or every 40 thousand kilometers.
  • Fully meets the standards of DOT 4 and can be used for ABS systems.
  • Can be mixed with brake fluids of categories, DOT 4 and DOT 3.

Brake fluid "Castrol"

Despite the fact that brake fluid "Castrol" DOT 4 is certified according to the standard of DOT 4, its boiling point exceeds the requirements and is 265 OC, in contact with water – 175 OC. According to the manufacturer's recommendations, change it every two years, respectively, it is possible to fill in a sports car.

brake fluid Castrol dot 4

Brake fluid "Castrol" DOT 4 is implemented in a very awkward packaging: a bottle of 1 liter to find in the automotive stores is impossible. For this reason, when replacing the liquid will have to buy several half-liter containers, overpaying for packaging. It is noted by many car owners.

The advantages of this brake fluid:

  • Resistance to boiling even when moisture in the composition.
  • Compliance with strict standards.
  • Ideal for cars with ABS – has a good viscosity.

Brake fluid "Rosa"

Brake fluid "Rosa"DOT 4 – a mixture, composed of anti-rust and antioxidant additives, and a boron-containing polyester. Has a good boiling point dry and wet – 260 OC and 165 OC, respectively. Can be operated at ambient temperatures ranging from -40 OC to 45 OC.

brake fluidRosa dot 4

Brake fluid "Rosa" DOT 4 is used in brake systems of passenger cars and commercial vehicles, including the front drive cars of domestic production.

Operation Life of the liquid is three years. Can be mixed with such compositions as «Neva» and «Tom», without loss of performance.

Brake fluid Sintec

Perhaps one of the most accessible in terms of price (only 100 p) of brake fluids of domestic production. Made brake fluid Super DOT 4 at the factory “Obninskorgsintez”. Despite domestic production, according to its characteristics, it can overtake many of the imported analogues: the boiling point is 240 OWith dry and 155 OWith - in the wet. Perfect for measured trips, a slight difference in viscosity while riding is not felt.

brake fluid super dot 4

The Only drawback are unstable features: all of the tests that was brake fluid from Obninsk, showed different results. Of course, this does not affect the requirements of the standard, however, says nothing good about the manufacturer.

Brake fluid Liqui Moly

Brake fluid Liqui Moly its characteristics loses its analogues: the boiling points for wet and dry version of her is 230 OC and 155 OS, respectively, at low temperature the viscosity is 1800 mm2/s. the characteristics of the composition perfectly meet the standards of DOT 4, but not exceed them. The affordable price of 300 p. to a certain extent, it compensates, however, the use of this liquid in our climate for vehicles with ABS, definitely not worth it.

brake fluid dot 4 Toyota

Separately, a excellent lubricating and anticorrosion properties of Liqui Moly, which has focused manufacturer. By its nature this brake fluid is ideal for drivers seeking a relaxed pace of driving and staying in the middle lane of our country.

The benefits of a brake fluid Liqui Moly

  1. Excellent anti-corrosion properties.
  2. Brake hoses and rubber seals.

Selecting a brake fluid

Suitable brake fluid is selected according to the parameters of the car. To find out what the composition was filled in the factory and which can be used later in the repair manual and operation of cars. Also you can ask from an authorized dealer.

Should pay attention to such parameters of the braking liquid, as the boiling temperature in dry and wet form, viscosity and standard. Category below DOT 4 can not be used for vehicles equipped with an antilock braking system, since this may cause damage to both the ABS and brake system.

To contact the service station authorized dealer to diagnose the system and fill with new brake fluid.


Article in other languages:

AR: https://tostpost.com/ar/cars/18689-dot-4-4.html

BE: https://tostpost.com/be/a-tamab-l/35697-tarmaznaya-vadkasc-dot-4-tarmaznaya-vadkasc-kastrol-dot-4-vodguk-a-taa.html

DE: https://tostpost.com/de/autos/35349-bremsfl-ssigkeit-dot-4-bremsfl-ssigkeit-kastrol-dot-4-bewertungen-von-.html

ES: https://tostpost.com/es/coches/35195-el-l-quido-de-frenos-dot-4-el-l-quido-de-frenos-kastrol-dot-4-los-clie.html

HI: https://tostpost.com/hi/cars/20367-4-4.html

JA: https://tostpost.com/ja/cars/18353-4---4.html

KK: https://tostpost.com/kk/avtomobil-der/36005-tormoznaya-zhidkost-dot-4-tormoznaya-zhidkost-kastrol-dot-4-p-k-rler-a.html

PL: https://tostpost.com/pl/samochody/37151-p-yn-hamulcowy-dot-4-p-yn-hamulcowy-kastrol-dot-4-opinie-kierowc-w.html

PT: https://tostpost.com/pt/carros/36954-fluido-de-dotcom-4-o-fluido-de-freio-kastrol-dotcom-4-viajante-motoris.html

TR: https://tostpost.com/tr/arabalar/32454-fren-hidroli-i-dot-4-fren-hidroli-i-kastrol-dot-4-s-r-c-lerin-yorumlar.html

UK: https://tostpost.com/uk/avtomob-l/36261-gal-m-vna-r-dina-dot-4-gal-m-vna-r-dina-kastrol-dot-4-v-dguki-avtolyub.html

ZH: https://tostpost.com/zh/cars/5600-4-bp-4.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

Speed sensor VAZ-2114: replacement and diagnosis with their hands

Speed sensor VAZ-2114: replacement and diagnosis with their hands

the VAZ-2114 speed sensor is very important. It is the adjustment of the composition of the fuel mixture and ignition timing. And with power steering – enabling and disabling of this mechanism.For gasoline cars used a cable ...

Overview of disks VSMPO VEGA

Overview of disks VSMPO VEGA

In recent years, almost all passenger cars were equipped with cast and forged discs. And their popularity is associated not only with aesthetic function, but also with technical specifications. They, unlike the regular steel parts...

The piston is the part of the car engine. Device, replacement, installation of the piston

The piston is the part of the car engine. Device, replacement, installation of the piston

the Piston is one of the elements of the crank mechanism, which is based on the principle of operation of many internal combustion engines. In the above article describes the design and features of these components.DefinitionPisto...

Choose budget crossover

Choose budget crossover

When choosing a low crossover, the most difficult is the very definition of a “budget”. For someone to "BMW X6" at a cost within the budget, and for someone and the little “Chinese” it seems prohibitively e...

Input shaft bearing

Input shaft bearing

Any mechanical transmission has in its device input shaft bearing. Input shaft – this is one of the leading elements in the transmission. He needed to transfer torque from the clutch to the driven and intermediate shaft. The...

Motoblock MTZ: description, feature, price

Motoblock MTZ: description, feature, price

Every cottager dreams that he had a technique that performs all the hard work on the site. By the way, the last time this dream becomes quite real in the presence of certain funds. Every year the demand for power tillers is gradua...