How to replace brake pads? The features of the process

Date:

2019-11-16 13:20:08

Views:

433

Rating:

1Like 0Dislike

Share:

Table of contents:

Brake system – the one that is used more often than others, and therefore still in the design phase of her pay close attention. Manufacturers are doing everything possible to serve as long as possible. But someday, the moment comes when the brake pads require replacement. The rate of wear depends on many factors: the type of gearbox, operating conditions, manufacturer, driving style, etc – to remember that the delay in the replacement of brake pads it is impossible in any case. It affects not only your own life but the lives of others.
how to replace brake pads

When to change?

Before asking a question about how to replace front brake pads or rear, needs to be clear that this moment has arrived. How to do it? It's very simple. As a rule, they are equipped with special wear sensor, which begins to emit a nasty metallic squeal when braking, not to hear which is almost impossible. In any case, it is necessary to perform periodic visual inspection of the brake pads. If their thickness was less than 3 mm, and the screeching no, you can safely proceed to the replacement.

What to choose?

Before you replace your brake pads, you need to decide on their choice. It is advisable to buy original items, selecting them according to a special directory depending on the car model, year, body type, etc., or to purchase goods from reputable manufacturers. Otherwise you can easily run into a fake.

how to replace rear brake pads

How to replace brake pads

First, using the Jack should lift the car (after setting of thrust pads) and remove the wheels. Better to remove both wheels, because with one, you can always refer to another as a reference. After this you need to Unscrew the bolt of the caliper. Before you replace your brake pads, you should carefully check the condition of the anthers of the guides and cylinder. In the case of the presence of defects they, too, must be replaced.

The next step is to get rails staples drive, carefully smooth out their fine sandpaper and lubricate with petroleum jelly. Then you need to return guides in place, wearing the anthers.

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

Now you need to get the old pads. Before you change the brake pads and the grooves where they are located, should be thoroughly cleaned from dirt. Installing new pads should be put under special gravitatorias grease. Then you need to return to their former place tin damping pads. Now you need to install at the same place the brake bracket and tighten all bolts. That's all. Left to put the wheel and perform the same operations with the other. Upon completion of the work by using the Jack to lower the vehicle.

Upon completion, it is necessary to pump the brakes to get rid of the gaps that are formed between the pads and disc and a brake caliper piston. It's enough to repeatedly press and release the brake pedal.

how to replace front brake pads

Usually the time of work even for the inexperienced motorist takes about an hour. Speaking about how to replace rear brake pads, it should be further noted that all work to perform better on the overpass. In addition, you must release the tension of the handbrake cable.


Article in other languages:

AR: https://tostpost.com/ar/cars/19914-how-to-replace-brake-pads-the-features-of-the-process.html

BE: https://tostpost.com/be/a-tamab-l/37635-yak-zamyan-c-tarmaznyya-kalodk-asabl-vasc-pracesu.html

DE: https://tostpost.com/de/autos/37244-so-ersetzen-sie-die-bremsbel-ge-merkmale-des-prozesses.html

ES: https://tostpost.com/es/coches/37011-c-mo-reemplazar-las-pastillas-de-freno-caracter-sticas-del-proceso-de.html

HI: https://tostpost.com/hi/cars/21598-how-to-replace-brake-pads-the-features-of-the-process.html

JA: https://tostpost.com/ja/cars/19545-how-to-replace-brake-pads-the-features-of-the-process.html

KK: https://tostpost.com/kk/avtomobil-der/37980-degen-tormoznye-kolodki-proces-n-erekshel-kter.html

PL: https://tostpost.com/pl/samochody/39471-jak-wymieni-klocki-hamulcowe-cechy-procesu.html

PT: https://tostpost.com/pt/carros/39131-como-substituir-as-pastilhas-de-freio-caracter-sticas-do-processo.html

TR: https://tostpost.com/tr/arabalar/34477-de-i-tirme-fren-balatas-zellikleri-i-lem.html

UK: https://tostpost.com/uk/avtomob-l/38366-yak-zam-niti-gal-m-vn-kolodki-osoblivost-procesu.html

ZH: https://tostpost.com/zh/cars/20096-how-to-replace-brake-pads-the-features-of-the-process.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

What is the ignition and what does it do?

What is the ignition and what does it do?

ignition – this is the part that turns the DC mains car in high voltage necessary for the operation of xenon headlights. This part is sold only in cases where a motorist not bought a full set of xenon lighting. To do without...

What is the center differential and how it works?

What is the center differential and how it works?

the Center differential – this is the most effective method of increasing the patency of any car. Currently, almost all SUVs, including some crossovers are equipped with a data element. Like all other technical mechanisms, t...

As you replace the pins on the

As you replace the pins on the "GAZelle"?

Initially, light-duty truck "GAZelle" were known for their simple design and ruggedness service. Therefore, most owners of these cars do the repairs yourself. Despite the fact that the vehicle does not have a partic...

Winter tires

Winter tires "Velcro": what are its advantages?

Winter tires "Velcro" is becoming more popular on the Russian open spaces. Despite the fact that in our stores, she appeared much later spike, its benefits are appreciated by many motorists. The car with these wheels, no noise, no...

Choose the car. The CVT automatic – which is better?

Choose the car. The CVT automatic – which is better?

the latest generations of cars can install both mechanical and automatic transmission. Besides, it's not that rare steel machines with variable speed. If the mechanics is all relatively clear, as is the case with the last two? But...

The SUV

The SUV "Nissan-patrol" 6-th generation: the SUV has no place here!

for the First time the Japanese SUV «Nissan patrol” was born in 1951. At the time this car was created for the army and in personal appearance resembled a jeep Willys. The release of the next generations was performed ...