How to start on the mechanics? Tips for beginners

Many people say that the transmission “mechanics” more complex to manage than the “automatic” and newcomers to learn is very difficult. In fact, the principle of driving a car with manual gearbox can be learned in one day, but if you try very hard, for a few hours. Be sure – after a few weeks you'll be driving like a Pro. Today we will tell you in detail how to start on the mechanics and switch gears on a manual transmission.

As is known, vehicles with a manual transmission fitted with three pedals. From the bottom of the left performs the function of a clutch, medium – brake, and the right – gas. We are going to use while driving.

Step 1 – start the engine

So, let's consider how to start on the mechanics. First, you need to pay attention to the gearshift lever. On top of it has the shift pattern. It should be learned, to further avoid unnecessary operations and views. The shift pattern is very primitive, so after a couple days of driving, you automatically learn it by heart. But back to the topic. Before you turn the ignition key, make sure that the gear lever is in neutral position. To do this, pull the lever to the left to the right. If it moves freely, quietly turn the ignition key. If the machine is "in gear", press the clutch pedal and pull the gear lever towards himself until, until you feel that it moves freely.

How to start on the mechanics? Stage 2 – “go!”

After starting the engine you must re-clutch and shift back the lever in position “1”, that is, to include the first transfer. Now the fun begins. Smoothly release the clutch pedal and once the car began to move, pressing on the gas. But at the same time, but smoothly and gently, until the tachometer needle is in the green scale. If too sharply release the clutch, the car moves rapidly at first and then stops. If to direct the gas pedal to the floor the car in a matter of seconds to fly from the place, so much so that you will not even be able to react. Therefore, it is best to train on a special pad or the circuit where there are no poles in close proximity to and expensive «Mercedes».

Recommended

"IZH 350 Planeta Sport" – frisky Soviet bike

It is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the line went down the fir...

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

Learn to drive stick and shift gears

After the machine is moved and the momentum came to a red dial, switched to 2nd gear. To do this, release the throttle, squeeze the clutch and at the same time move the gearshift lever into the desired position. Release the left pedal, but not dramatically. Once you feel the clutch is almost released, this time smoothly press on the gas and only then release it. It is worth noting that the more powerful the engine of the vehicle, the less you have to push the trigger.

And, by the way, when move, if it VAZ family “classics” or the GAZelle, the gas pedal should be pressed while the car started moving. Only after the tachometer needle went to the green scale, release the left pedal.

At this stage, the question on how to start on the mechanics, can be considered closed.