Oil ring. Replacement occurrence, racconsole, appointment

Date:

2019-12-10 02:20:14

Views:

462

Rating:

1Like 0Dislike

Share:

Table of contents:

As you know, the car may not always be in perfect condition. Quite often parts are prone to failure, not just failure. They tend to wear out. Replace parts, such as valve seals or rings may be independently and contact the service station. Of course, it's not cheap, but it is able to greatly simplify the repair of the vehicle. It is very important that in the car everything worked properly, as it depends entirely on the safety of the people who are on the passenger seat. Specialists will do all the work, then the vehicle will again be like new.

This article is intended for people who for certain reasons want to hold the maintenance the car yourself. Namely, we will focus on how to properly replace oil ring.oil ring

General concepts

For motorists the concept of oil control rings is not new. This detail is one of the most important components of the engine. Piston rings, consisting of and oil, are composed of several elements such as:

  • Lower oil control;
  • Upper compression;
  • Compression-oil control.

From their technical condition very much depends. For example, oil ring directly affect the amount of spent fuel or oil, the level of toxicity of emissions, power, which is capable of accelerating the car. And, what is most important, as the starting properties of the engine.

Recommended

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

What you need to personally change the oil ring?

In order to replace the rings, you will need accessories such as

  • Puller;
  • Tweezers;
  • Mandrel designed for insertion;
  • Metal rod;
  • Rassuharivatel.

replace oil ring

Acquisition details: highlights

Before you proceed to the replacement process, you need to buy new items. Buy only the original oil ring, which price is not lower than 300-500 rubles, depending on the models. Why it is not recommended to purchase cheaper items? As a rule, a low value indicates either low quality products, or fake. Such parts can guarantee the correct operation of the engine, so more than a few thousand kilometers this car simply will not pass. And what is most unpleasant in this moment, the damage can be much more serious and require large financial investments.

Quite often, experts in the field of repair of cars specially selected oil ring consisting of a material, completely corresponding to that from which made the engine itself. As for the other components (caps, etc.), they must also be suitable for all criteria.gap piston rings

Piston ring: key points

Not every owner of transport knows all the important details about piston rings. And this knowledge is extremely necessary for self-replacement of parts. For example, the gap of the piston rings is of great importance for the whole system. Let's try to understand what it is and why you need.

First and foremost, from physics all know that the objects when heated have the ability to expand. The same thing happens with piston mechanism. If you do not leave a gap, it will gradually lead to the violation of rotation of the circles. And this, in turn, will impede the heat dissipation.

The design of the piston includes compression and oil control rings. Each of these types has a special function. Compression rings do not miss the burnt gases, the valve clean the cylinder from oil residues. When heating occurs, the parts expand, which can lead to jamming of the rim. In order to fully prevent this, the necessary clearance of piston rings in the range from 0.3 to 0.6 mm. His absence will cause serious damage to the cylinder.oil control piston rings

Replacement rings: where to begin?

So, the new parts already purchased, then you can begin the process of replacing them. The first thing to run next – dismantling of all knots and mechanisms. It will ensure access to the necessary parts, but rather allows you to seamlessly replace oil control piston rings.

What is included in the complex demolition work?

  1. You Should remove the air filter, then fuel pump.
  2. Don't forget about the distributor in the ignition system. To disassemble the drive housing, perform the disassembly of bolted connections.
  3. This is followed by removing the terminal “minus” with a battery and a pulley (toothed) with Cam. In this part of the work can be considered successful.
  4. Next, in order to better get close to the cap located on the cylinder head, it is necessary to remove the actuator mass.
  5. The last thing you can begin to loosen the nuts that fix the bearing housing of the camshaft.

oil ring price

The Second phase of demolition works

In order toreplace the rings and valve caps led to the proper working of the engines General diagnostics car. Usually at this point checks the deterioration of the other parts and the quality of their fit. In any case, we cannot ignore the plight of the dowel of the camshaft. If in the process of dismantling is seen that they are not too densely planted, then they should also be removed. This must be done to avoid losing detail in the process of driving a vehicle.

After all that has been done has completely opened access to the camshaft, which must be pulled together with the omentum. Next, to get the oil ring, install the parts in this position, where the piston will be at TDC. Pulling the candle, it is necessary in the hole to insert the rod. If you do not follow this, the valve will easily fail.

Next you need to use a special tool to compress the spring located on the valve, and pull the two cracker. You can get them with the tweezers. Then, using the special tool, remove the rings. This dismantling work is finished.replacement rings and oil scraper caps

Installation Process

Now let's talk about how to properly perform the installation process. This work will consist of several stages:

  1. You must First shoot with the new parts of the spring. This should be done very carefully to avoid damage.
  2. Next, you need all the elements of a cover with engine oil. You can then press the engine itself and return in the spring.

Important: replace the oil ring is made with strict observance of the sequence. The detailed extraction process described above. Be careful that the sides were in places where it should be. Otherwise it may cause a sharp increase of quantity of spent oil.

Racconsole piston rings using chemicals

For those who prefer to engage in their own personal car, you must know what racconsole rings. In short, it is removing carbon deposits from parts. Unfortunately, not all motorists have a positive attitude to this procedure. Some of them think it's a good way of preventing engine operation, and others – inexpedient.

But let's listen to the experts. They argue that when conducting decarbonize removed the excess hardened oil that contribute to the wear of the oil caps. The result of this procedure is to significantly increase the power of the power unit.

In order to avoid sakatsuka piston rings, which may be a failed oil control part, it is recommended to conduct this procedure. It will help to get rid of the formation, thereby extending the engine life for a while.

But for a complete solution of this problem still need to replace the valve seals and rings.oil ring vases

The Rings on the engine of the car VAZ

In Russia the most common car brand – Mercedes. Therefore, to acquire items for replacement is not a problem. They are widely sold in all specialized stores. During engine overhaul, the main thing - correctly to pick up the compression and oil ring (VAZ – mark the motor, which should be combined items). Their choice is affected by the desired end result. For example, to restore normal engine operation is sufficient to install a simple regular rings, but for performance preference is given to molybdenum or chrome-plated parts.


Article in other languages:

AR: https://tostpost.com/ar/cars/20194-racconsole.html

BE: https://tostpost.com/be/a-tamab-l/37883-maslos-emnye-kol-cy-zamena-pry-zalyagann-raskoksovka-pryznachenne.html

DE: https://tostpost.com/de/autos/37504-maslos-emnye-ringe-wechsel-bei-zaleganii-raskoksovka-die-ernennung.html

ES: https://tostpost.com/es/coches/37265-juntas-de-v-stago-de-los-anillos-la-sustituci-n-de-la-zaleganii-raskok.html

HI: https://tostpost.com/hi/cars/21913-racconsole.html

JA: https://tostpost.com/ja/cars/19851-racconsole.html

KK: https://tostpost.com/kk/avtomobil-der/38261-kol-ca-maslos-emnye-auystyru-kez-nde-zaleganii-raskoksovka-ta-ayyndau.html

PL: https://tostpost.com/pl/samochody/39777-pier-cie-zgarniaj-cy-olej-wymiana-przy-zaleganii-raskoksovka-przeznacz.html

PT: https://tostpost.com/pt/carros/39428-maslos-emnye-an-is-substitui-o-ao-zaleganii-raskoksovka-a-atribui-o-de.html

TR: https://tostpost.com/tr/arabalar/34752-maslos-emnye-y-z-k-de-i-tirme-s-ras-nda-yap-lacak-yol-in-aatlar-raskok.html

UK: https://tostpost.com/uk/avtomob-l/38664-maslos-emni-k-l-cya-zam-na-pri-zalyagann-rozkoksovka-priznachennya.html

ZH: https://tostpost.com/zh/cars/29233-racconsole.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

"IZH 350 Planeta Sport" – frisky Soviet bike

it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...

What a helmet for a scooter it is best to buy?

What a helmet for a scooter it is best to buy?

a Moped is not considered to be a full-fledged transport and the flippant attitude of their drivers to safety. To meet a rider without special equipment is not difficult. Moreover, many of them moving directly in areas of heavy au...

Gas equipment on the car (5th generation): a device principle of operation, installation, prices

Gas equipment on the car (5th generation): a device principle of operation, installation, prices

currently very popular to install LPG in the car. It is connected first of all with financial savings on the purchase of fuel for transport. This equipment is a device that gives the ability to store and supply gas to the motor, w...

The oil pressure sensor for VAZ-2114. Sensor of emergency oil pressure

The oil pressure sensor for VAZ-2114. Sensor of emergency oil pressure

No internal combustion engine can't operate without a lubrication system. Engine oil supplied by the oil pump, is supplied through special channels to all moving parts of the power unit, reducing friction and cleaning them from un...

What type of car best. Main types of cars and trucks. Types of car fuel

What type of car best. Main types of cars and trucks. Types of car fuel

life in the modern world it is impossible to imagine without different vehicles. They surround us everywhere, almost no industry can not do without the services of transport. Depending on what type of car, the functionality of veh...

“Skoda Roomster”: specifications of a popular Czech minivan

“Skoda Roomster”: specifications of a popular Czech minivan

What is this car like “Skoda Roomster"? Specifications this machine is pretty interesting. As the model itself. So that should tell more about this car, which first appeared to our eyes in 2003.Start of historyBefore ta...