Polishing headlights with toothpaste. Tips, reviews

Date:

2019-12-18 09:00:15

Views:

423

Rating:

1Like 0Dislike

Share:

Table of contents:

Things tend to lose their original appearance under the influence of various factors. This fully applies to the automotive and optics. Over time, headlight yellow on the surface gets scratched. It is necessary to do something. You can give the optics a perfect view. Polishing headlights with their hands toothpaste – a simple technology that gives the optics a second life.

Why periodically Polish

Optics of the car is very important, but lights are constantly subjected to various influences – sand, gravel, dirt, rocks flying from the wheels of other cars. Besides, the optics affect different insects. All sooner or later can lead to the fact that the light will lose its brightness, and focus. In addition, the car loses its appearance, presentability and attractiveness. polishing headlights with toothpasteTo Avoid this will fail. Therefore, the required periodic cleaning, polishing, repair lights. To put in order the optics are better with their hands – so you can save a considerable amount of money and time. Plastic headlights can thicken and deteriorate due to sloppy cleaning cloth. Perhaps is lacking a soft, clean cloth, or soaked any harmful detergent.

What you need to know about cleaning and polishing of optics

At home I use a simple and proven technology. Reviews say that the quality of the material, you can use the paste GOI or tooth-ordinary. Polishing headlights with toothpaste is suitable for any optics – and for glass and plastic.

Tools and materials

In the standard Arsenal for polishing must be tools by which you can remove the caps. You should also stock up on masking tape. For sanding deep scratches needed sanding paper with different grit sizes. The maximum range of grain size should range from 600 to 4000. To carry out this work as quickly as possible, could use a sander or any other power tool. Of course, polishing headlights with toothpaste it will not work without the paste. Clean water wet sanding the surface, and rinse it out. polishing headlights with their hands toothpastePolishing plastic headlights toothpaste provides the presence of a foam sponge. Also great felt or felt. If nothing, then you can use a polishing attachment for electric drills.

Recommended

How does the rear bushing front arm and how many it serves?

How does the rear bushing front arm and how many it serves?

The Rear bushing front arm – one of the constituent elements of the vehicle chassis. He refers to the guide elements of the suspension together with the levers endures tremendous stress with wheels. However, with this this item, there are many ...

Oil consumption in the engine. Six reasons

Oil consumption in the engine. Six reasons

It is Hardly possible to find a motorist who would not be worried about the increased oil consumption. It is especially annoying when it happens with another new motor. Here are the most common causes that result in the consumption of oil in the engi...

How does the exhaust system?

How does the exhaust system?

The exhaust System is designed to remove combustion products from the engine and output them to the environment. It also must be ensured a reduction in noise pollution to acceptable limits. Like any other complex devices, this system consists of seve...

Before beginning work, the optics must be removed first by taking care of electrical safety, and lock the headlights in a comfortable position. Only then you can begin to work.

The polishing Process

The Technology includes several stages:

  • Close the metal parts and the rubber seals.
  • Pre-cleaning from dust or dirt.
  • Polishing the headlights with toothpaste.
  • Clear.

The first step is to prepare the field for work. headlight polishing autoThe First thing with duct tape is required to seal all metal parts or gaskets to protect them from damage in the polishing process. Next, the entire surface is thoroughly cleaned from any contaminants. Removed not only the dust and dirt, but also various fats, oils, and more. For such cleaning it is best to use a degreaser.

When all the preparatory work is finished, you can go to the rubbing process. Polishing headlights with their hands toothpaste involve the application of substances directly to the surface or felt or any other soft fabric. To Polish the surface, it is necessary to make a vigorous and very rapid circular motion.

For more efficiency and a good result is recommended to use electrical tools. This can be either an angle grinder or hammer drill, or a drill. Power tools should be equipped with special polishing tools or grinding wheels, which is applied to the toothpaste or any other material. Polishing car headlights can also be performed using specially designed composition based on diamond dust.

polishing plastic headlights toothpaste

If you need to handle glass or plastic headlight, it is important that the surface not subjected to overheating. Otherwise it may lead to cracks, and plastic at high temperatures may become deformed. To prevent this constantly in the process control temperature. Do it with one hand – if the glass can hold onto that, all right. In the process, it is important to pause. If there are certain skills that you can easily achieve excellent results.

Features polishing glass

Polishing headlights with toothpaste, if the surface of the optical device made of glass, has virtually no differences from the polishing of plastic. But the process requires extreme accuracy. You should also consider that this same work on STO will be much more expensive. It is recommended to use brushes with medium stiffness. The process is carried out until, until the surface will not be scratched. Then, a polishing felt or a towel, but without toothpaste. The whole process from beginning to endwill take from 30 minutes to a few hours. The total time depends on some factors:

  • Size scratches.
  • Apply the tool.
  • Manual or automatic polishing.
  • Material optics.home headlight polishing

If the scratch is fairly deep, it is possible to apply processing with the use of sandpaper, but only for a first draft. And after the scratch is destroyed, you can move on to the process of polishing and grinding glass. There are such situations when after the headlight is still hazy. In this case, the optics are completely disassembled, and carried out all the actions, but from the opposite, inner side.

Polishing fog lights

If you want to perform the polishing of glass in PTF, it will fit all the same as for ordinary glass. Requirements and conditions will be the same. But the main caveat is that the glass in this headlight thicker, although its area is less. Such optics are polished much faster and the risk of damage to the glass from overheating is minimal. However, this glass must be abundantly moistened.

The advantages of polishing with your hands

Polishing headlights with toothpaste – it is simple and available for every process. But there are other indisputable advantages of this method. So, the price of polishing a HUNDRED would be about 800 rubles. In severe cases it can be higher.
polishing repair headlightAt home the same process will cost practically free. Another advantage – this time. Finally, all the technology performed without special tools and fixtures. Reviews say that it can be polished headlight in absolutely any conditions.

Cons

With all the advantages there are disadvantages. The main drawback – short-term effect, but the process must be repeated with sufficient regularity. In addition, if the process does not have to observe punctuality, you can easily damage the glass.

But overall, despite the shortcomings, homemade headlight polishing – is the best option when you need to quickly and inexpensively return optics excellent appearance and performance. Reviews from owners say that for best effect you should buy a special Polish.


Article in other languages:

AR: https://tostpost.com/ar/cars/20297-polishing-headlights-with-toothpaste-tips-reviews.html

BE: https://tostpost.com/be/a-tamab-l/37962-pal-ro-ka-fary-zubnoy-pastay-parady-vodguk.html

DE: https://tostpost.com/de/autos/37595-scheinwerfer-polieren-zahnpasta-tipps-bewertungen.html

ES: https://tostpost.com/es/coches/37357-pulido-de-faros-de-pasta-de-dientes-consejos-de-los-clientes.html

HI: https://tostpost.com/hi/cars/22002-polishing-headlights-with-toothpaste-tips-reviews.html

JA: https://tostpost.com/ja/cars/19956-polishing-headlights-with-toothpaste-tips-reviews.html

KK: https://tostpost.com/kk/avtomobil-der/38368-zhyltyratu-faralar-t-s-pastasy-ke-ester-p-k-rler.html

PL: https://tostpost.com/pl/samochody/39899-polerowanie-reflektor-w-past-do-z-b-w-porady-opinie.html

PT: https://tostpost.com/pt/carros/39546-polimento-de-farol-de-pasta-de-dente-dicas-coment-rios.html

TR: https://tostpost.com/tr/arabalar/34840-parlatma-farlar-di-macunu-tavsiyeler-yorumlar.html

UK: https://tostpost.com/uk/avtomob-l/38770-pol-ruvannya-fari-zubnoyu-pastoyu-poradi-v-dguki.html

ZH: https://tostpost.com/zh/cars/30969-polishing-headlights-with-toothpaste-tips-reviews.html






Alin Trodden - author of the article, editor
"Hi, I'm Alin Trodden. I write texts, read books, and look for impressions. And I'm not bad at telling you about it. I am always happy to participate in interesting projects."

Comments (0)

This article has no comment, be the first!

Add comment

Related News

"IZH 350 Planeta Sport" – frisky Soviet bike

it is believed that of the entire line of Soviet motorcycles "IZH" truly sporty just one. It is easy to guess that it was "IZH 350 Planeta Sport".History motorcycleIn 1973 the factory "Izhmash" was made a real breakthrough: the li...

How to install fog lights on

How to install fog lights on "Priority"?

the Residue of the morning mist or evening – the phenomenon is very frequent in our climate zone. However, such weather conditions hamper safe to travel by car due to poor visibility, especially if the vehicle is not equippe...

Toyota Verossa (

Toyota Verossa ("Toyota Verossa"): specifications and owner reviews

Toyota in the early twentieth century was at the peak of popularity in the country. In Japan in those days, the demand for cheap and large sedans under the hood which was hiding powerful engines. Models such as the Toyota Verossa,...

Car GSM beacon: popular, purpose

Car GSM beacon: popular, purpose

Autonomous GSM beacon today is a fashionable trend in the protection of vehicles against theft. The market has a large selection of these devices. A small price determines the success among motorists. But how this protection will ...

Dump truck

Dump truck "Khovo": specifications, owner reviews, photos

the Truck ‘Khovo” today is one of the most popular brands of cars of its type on the market of Russia and other CIS countries. In the first place, so its popularity is due to the fact that it's considered quite cheap c...

"Lada 4x4 urban": technical characteristics, description, photos

the Car «Lada urban 4x4" of the specifications which we will explain in detail in the article, announced two years ago, “AVTOVAZ” like a real new domestic SUV, made on the basis of all known «the Field...